Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Conn Shrouded Header HDR 2 POS Solder RA Thru-Hole Box
Pre-order
148,000
Factory Lead Time:18-22 weeks
26+
14,800+$0.035
44,400+$0.0344
74,000+$0.0335
- +
Ext. Price(USD):$518.00
MOQ:14,800
Mult:14,800
SPQ:14,800
JST
ECAD Model:
Conn Shrouded Header HDR 17 POS 1.5mm Solder RA Thru-Hole
Available Stock
35
Estimated Ship Time:3-5 working days
25+
10+$0.3347
50+$0.3235
100+$0.3151
- +
Ext. Price(USD):$3.34
MOQ:10
Mult:1
SPQ:50
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.485
- +
Ext. Price(USD):$2,004.75
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Wire to Board Connector PL, 14 Power/24 Signal Pos, 2.54mm/3mm/7.5mm, Press Fit RA, Thru-Hole, Tray
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$17.575
1,200+$15.3875
3,000+$15.05
- +
Ext. Price(USD):$8,787.50
MOQ:500
Mult:500
Available Stock
100
Estimated Ship Time:14-17 working days
50+$0.8782
100+$0.7988
2,000+$0.704
4,000+$0.704
- +
Ext. Price(USD):$50.05
MOQ:57
Mult:1
SPQ:1
Wire-to-Board Connector HDR 10 Pos 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
1,417,500
Factory Lead Time:15 weeks
2,835+$0.9923
- +
Ext. Price(USD):$2,813.17
MOQ:2,835
Mult:2,835
SPQ:945
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3022
- +
Ext. Price(USD):$1,171.98
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
JST NV Series Wire-to-Board Connector, 5.0mm Pitch, 4-Pin Header, Top Entry, TH
Available Stock
8,064
Estimated Ship Time:5-9 working days
22+
10+$0.3297
50+$0.2524
150+$0.2481
- +
Ext. Price(USD):$3.29
MOQ:10
Mult:5
SPQ:500
SMT Type Shrouded Header
Pre-order
40,000
Factory Lead Time:16-18 weeks
4,000+$0.5042
- +
Ext. Price(USD):$2,016.80
MOQ:4,000
Mult:4,000
JST
ECAD Model:
Unshrouded Header HDR 3 Pos 2.5mm Solder RA Thru-Hole
Available Stock
900
Estimated Ship Time:14-17 working days
300+$0.1452
500+$0.1343
10,000+$0.0972
30,000+$0.0972
- +
Ext. Price(USD):$50.09
MOQ:345
Mult:1
SPQ:1
Pre-order
1,575,000
Factory Lead Time:15 weeks
3,150+$0.2577
- +
Ext. Price(USD):$811.75
MOQ:3,150
Mult:3,150
SPQ:3,150
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.2291
- +
Ext. Price(USD):$1,474.92
MOQ:1,200
Mult:1,200
SPQ:400
Conn Wire to Board HDR 14 POS 3mm Solder ST Top Entry Thru-Hole
Pre-order
1,080,000
Factory Lead Time:15 weeks
2,160+$1.304
- +
Ext. Price(USD):$2,816.64
MOQ:2,160
Mult:2,160
SPQ:720
Molex
ECAD Model:
Conn Unshrouded Header HDR 38 POS 2.54mm Solder ST Thru-Hole C-Grid III Tray
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$2
- +
Ext. Price(USD):$6,000.00
MOQ:3,000
Mult:3,000
SPQ:3,000
JST
ECAD Model:
Disconnectable Insulation Displacement Connectors
Pre-order
50,000
Factory Lead Time:18-22 weeks
26+
5,000+$0.2401
15,000+$0.236
25,000+$0.2301
- +
Ext. Price(USD):$1,200.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$3.3375
5,000+$2.95
10,000+$2.55
25,000+$2.275
50,000+$2.0375
- +
Ext. Price(USD):$3,337.50
MOQ:1,000
Mult:1,000
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.7524
- +
Ext. Price(USD):$3,715.74
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.1664
- +
Ext. Price(USD):$5,549.76
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR 14 Pos 4.2mm Solder ST Top Entry TH
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$4.4428
- +
Ext. Price(USD):$6,597.55
MOQ:1,485
Mult:1,485
SPQ:495
Minitek 1.80mm WTB Connector USCAR 2 V2 Compatible Right Angle TH 40-Pin Header B Coding
Pre-order
1,200,000
Factory Lead Time:10 weeks
2,400+$2.7245
- +
Ext. Price(USD):$6,538.80
MOQ:2,400
Mult:400
SPQ:400
Conn Ejector Header HDR 20 POS 1.27mm Solder RA Thru-Hole
Available Stock
18
Estimated Ship Time:6-12 working days
1+$4.0255
10+$3.5424
500+$3.478
1,000+$3.478
- +
Ext. Price(USD):$24.15
MOQ:6
Mult:1
Wire-to-Board HDR, 2 Pos, 4.2mm Pitch, Solder, ST Top Entry, TH
Pre-order
2,362,500
Factory Lead Time:15 weeks
4,725+$1.4032
- +
Ext. Price(USD):$6,630.12
MOQ:4,725
Mult:4,725
SPQ:1,575
Conn Shrouded Header HDR 8 POS 3.81mm Solder ST Thru-Hole Box
Available Stock
139
Estimated Ship Time:14-17 working days
10+$2.6564
30+$2.0879
500+$1.5549
1,000+$1.5479
- +
Ext. Price(USD):$50.47
MOQ:19
Mult:1
SPQ:1
Shrouded Header HDR 40 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
564
Estimated Ship Time:5-9 working days
22+
5+$1.1692
15+$0.9371
30+$0.9213
- +
Ext. Price(USD):$5.84
MOQ:5
Mult:1
SPQ:108
JST
ECAD Model:
Shrouded Header HDR 11 Pos 1mm Pitch Solder ST Thru-Hole Box
Available Stock
27
Estimated Ship Time:4-6 working days
26+
1+$0.765
- +
Ext. Price(USD):$0.76
MOQ:1
Mult:1
SPQ:1
25 / PageGoto