Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Pre-order
71,300
Factory Lead Time:22-26 weeks
713+$0.4875
2,850+$0.4625
- +
Ext. Price(USD):$347.58
MOQ:713
Mult:713
SPQ:713
2.0mm Pitch HPI Vertical Post Headers
Pre-order
2,240,000
Factory Lead Time:25-42 weeks
22,400+$0.2072
- +
Ext. Price(USD):$4,641.28
MOQ:22,400
Mult:22,400
SPQ:22,400
Wire-to-Board Connector Header, 20 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
315,000
Factory Lead Time:15 weeks
630+$7.3467
- +
Ext. Price(USD):$4,628.42
MOQ:630
Mult:630
SPQ:210
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.274
- +
Ext. Price(USD):$5,128.80
MOQ:1,200
Mult:1,200
SPQ:400
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.9192
- +
Ext. Price(USD):$827.28
MOQ:900
Mult:900
SPQ:300
Conn Wire to Board HDR 2 POS 7.92mm Solder ST Thru-Hole Box
Available Stock
67,000
Estimated Ship Time:6-7 working days
22+
1,000+$0.0467
- +
Ext. Price(USD):$46.70
MOQ:1,000
Mult:1,000
Shrouded Header HDR 2 POS 5mm Solder ST Thru-Hole Box
Available Stock
6,720
Estimated Ship Time:5-9 working days
22+
10+$0.2684
50+$0.205
150+$0.2015
- +
Ext. Price(USD):$2.68
MOQ:10
Mult:5
SPQ:200
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.9446
- +
Ext. Price(USD):$2,625.21
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7765
- +
Ext. Price(USD):$1,048.27
MOQ:1,350
Mult:1,350
SPQ:450
CamdenBoss
ECAD Model:
Wire-to-Board Connector HDR 5 POS 3.81mm Solder ST Top Entry TH
Available Stock
30
Estimated Ship Time:6-12 working days
10+$1.2768
100+$1.254
500+$1.254
1,000+$1.2312
2,500+$1.2312
- +
Ext. Price(USD):$24.25
MOQ:19
Mult:1
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6469
- +
Ext. Price(USD):$1,482.21
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Conn Board to Board RCP 12 POS 2mm Solder RA Thru-Hole Box
Available Stock
250
Estimated Ship Time:6-7 working days
20+$0.4397
- +
Ext. Price(USD):$8.79
MOQ:20
Mult:20
Pre-order
50,400
Factory Lead Time:16-18 weeks
5,040+$0.1186
- +
Ext. Price(USD):$597.74
MOQ:5,040
Mult:5,040
Conn Socket Strip F 72 POS 2.54mm Solder RA Thru-Hole
Available Stock
29
Estimated Ship Time:6-12 working days
1+$15.5898
10+$15.3115
250+$15.0331
500+$15.0331
- +
Ext. Price(USD):$31.17
MOQ:2
Mult:1
Molex
ECAD Model:
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.4375
6,000+$0.4125
- +
Ext. Price(USD):$1,312.50
MOQ:3,000
Mult:3,000
SPQ:3,000
Molex
ECAD Model:
Shrouded Header (4 Sides) M 24 POS 2mm Solder RA Side Entry Thru-Hole Tube
Pre-order
576,000
Factory Lead Time:22-26 weeks
5,760+$1.5375
- +
Ext. Price(USD):$8,856.00
MOQ:5,760
Mult:5,760
SPQ:5,760
JST
ECAD Model:
Shrouded Header (4 Sides) HDR 4 POS 2.5mm Solder RA Side Entry TH
Available Stock
2,728
Estimated Ship Time:6-7 working days
21+
20+$0.2759
200+$0.0967
- +
Ext. Price(USD):$5.51
MOQ:20
Mult:20
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.5459
- +
Ext. Price(USD):$1,391.31
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$4.2357
- +
Ext. Price(USD):$6,861.83
MOQ:1,620
Mult:1,620
SPQ:540
Pre-order
2,700,000
Factory Lead Time:12 weeks
5,400+$6.6016
- +
Ext. Price(USD):$35,648.64
MOQ:5,400
Mult:900
SPQ:900
JST
ECAD Model:
IDC Connector F 26 POS 2.54mm Solder RA Thru-Hole
Pre-order
16,000
Factory Lead Time:18-22 weeks
26+
1,600+$0.8457
4,800+$0.8316
8,000+$0.8104
- +
Ext. Price(USD):$1,353.12
MOQ:1,600
Mult:1,600
SPQ:1,600
Pre-order
70,000
Factory Lead Time:22-26 weeks
700+$3.5875
1,050+$3.3875
5,250+$3.1625
10,150+$2.9875
- +
Ext. Price(USD):$2,511.25
MOQ:700
Mult:700
SPQ:700
Pre-order
70,000
Factory Lead Time:22-26 weeks
700+$3.3625
1,050+$3.0125
5,250+$2.8125
10,150+$2.6375
- +
Ext. Price(USD):$2,353.75
MOQ:700
Mult:700
SPQ:700
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.322
- +
Ext. Price(USD):$966.00
MOQ:3,000
Mult:1,500
SPQ:500
Minitek 1.80mm WTB Connector, USCAR 2 V2 Compatible, Right Angle TH, 40-Pin Header D Coding
Pre-order
1,200,000
Factory Lead Time:10 weeks
2,400+$2.7245
- +
Ext. Price(USD):$6,538.80
MOQ:2,400
Mult:400
SPQ:400
25 / PageGoto