Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Shrouded Header HDR 4 POS 2mm Solder ST Thru-Hole Box
Available Stock
500
Estimated Ship Time:6-7 working days
20+$0.1936
- +
Ext. Price(USD):$3.87
MOQ:20
Mult:20
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.3265
- +
Ext. Price(USD):$2,387.70
MOQ:1,800
Mult:1,800
SPQ:600
Molex
Package:SMD,P=1.5mm
ECAD Model:
16 Circuits CLIK Mate Wire-to-Board PCB Receptacle, Dual Row, Vertical, 1.50mm Pitch, 0.38μm Gold Au Plating, Black, SMD
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$2.65
4,050+$2.325
10,350+$2.275
- +
Ext. Price(USD):$4,770.00
MOQ:1,800
Mult:1,800
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.9035
- +
Ext. Price(USD):$2,168.40
MOQ:2,400
Mult:2,400
SPQ:1,200
Molex
ECAD Model:
Conn Socket Strip RCP 2 POS 2.54mm Solder RA Side Entry Thru-Hole
Pre-order
100,800
Factory Lead Time:22-26 weeks
1,008+$0.2463
4,032+$0.2338
- +
Ext. Price(USD):$248.27
MOQ:1,008
Mult:1,008
SPQ:1,008
MTA 100 Connector Assembly, 24 AWG, Standard
Pre-order
250,000
Factory Lead Time:22-26 weeks
2,500+$0.5875
5,000+$0.5625
10,000+$0.5375
25,000+$0.45
- +
Ext. Price(USD):$1,468.75
MOQ:2,500
Mult:2,500
SPQ:2,500
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header, Dual Row, Vertical TH, 0.38um Gold Au Plating w/ Peg, 4.60mm PC Tail L, Pick & Place Cap, 28 Circuits, Glow Wire Capable, Tube
Pre-order
476,000
Factory Lead Time:22-26 weeks
4,760+$2.625
- +
Ext. Price(USD):$12,495.00
MOQ:4,760
Mult:4,760
SPQ:4,760
JST
ECAD Model:
IDC Connector RCP 14 POS 2mm IDT RA Cable Mount Box
Available Stock
11,500
Estimated Ship Time:6-7 working days
26+
500+$0.2454
- +
Ext. Price(USD):$122.70
MOQ:500
Mult:500
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.9627
- +
Ext. Price(USD):$866.43
MOQ:900
Mult:900
SPQ:300
Connector, Crimp Style, Disconnectable, 2.5mm Pitch
Available Stock
200
Estimated Ship Time:14-17 working days
50+$0.5973
100+$0.5096
4,000+$0.3514
5,000+$0.3503
- +
Ext. Price(USD):$50.17
MOQ:84
Mult:1
SPQ:1
Molex
ECAD Model:
Pre-order
192,000
Factory Lead Time:22-26 weeks
1,920+$1.6375
4,000+$1.45
10,000+$1.4
- +
Ext. Price(USD):$3,144.00
MOQ:1,920
Mult:1,920
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.5042
- +
Ext. Price(USD):$2,030.67
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$0.925
1,200+$0.8625
2,400+$0.825
4,200+$0.8
- +
Ext. Price(USD):$555.00
MOQ:600
Mult:600
SPQ:600
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 2 POS 2mm Solder ST Thru-Hole Tube
Pre-order
103,500
Factory Lead Time:22-26 weeks
1,035+$2.1625
2,070+$2.05
- +
Ext. Price(USD):$2,238.18
MOQ:1,035
Mult:1,035
SPQ:1,035
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 9 POS 2mm Solder RA Thru-Hole Tube
Pre-order
468,000
Factory Lead Time:22-26 weeks
4,680+$1.5125
- +
Ext. Price(USD):$7,078.50
MOQ:4,680
Mult:4,680
SPQ:4,680
44P, 2mm Connector Header
Pre-order
70,000
Factory Lead Time:22-26 weeks
700+$3.825
1,050+$3.6125
5,250+$3.375
10,150+$3.175
- +
Ext. Price(USD):$2,677.50
MOQ:700
Mult:700
SPQ:700
JST
ECAD Model:
Conn IDC Connector F 8 POS 2mm Solder ST Thru-Hole Box
Pre-order
180,000
Factory Lead Time:18-22 weeks
26+
18,000+$0.2831
54,000+$0.2784
90,000+$0.2713
- +
Ext. Price(USD):$5,095.80
MOQ:18,000
Mult:18,000
SPQ:18,000
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 12 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
648,000
Factory Lead Time:22-26 weeks
6,480+$0.975
- +
Ext. Price(USD):$6,318.00
MOQ:6,480
Mult:6,480
SPQ:6,480
JST
ECAD Model:
Conn Shrouded Header HDR 16 POS 2mm Solder RA Thru-Hole Box
Pre-order
36,000
Factory Lead Time:18-22 weeks
26+
3,600+$0.175
10,800+$0.1721
18,000+$0.1677
- +
Ext. Price(USD):$630.00
MOQ:3,600
Mult:3,600
SPQ:3,600
Conn Shrouded Header HDR 3 POS 2mm Solder RA
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.0625
- +
Ext. Price(USD):$1.25
MOQ:20
Mult:20
Wire-to-Board HDR 22 Pos 4.2mm Solder ST Top Entry TH
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.4694
- +
Ext. Price(USD):$925.72
MOQ:630
Mult:630
SPQ:315
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
405,000
Factory Lead Time:15 weeks
810+$1.1681
- +
Ext. Price(USD):$946.16
MOQ:810
Mult:810
SPQ:405
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8026
- +
Ext. Price(USD):$1,203.90
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$8.7047
- +
Ext. Price(USD):$11,751.34
MOQ:1,350
Mult:1,350
SPQ:450
Minitek Reg Pwr 4.2 HCC Wire-to-Board Connector Header Dual Row Right Angle TH Matte Tin Natural Color 8 Pos LCP Glow Wire
Pre-order
315,000
Factory Lead Time:15 weeks
630+$0.7973
- +
Ext. Price(USD):$1,004.59
MOQ:1,260
Mult:630
SPQ:630
25 / PageGoto