Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7799
- +
Ext. Price(USD):$1,169.85
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Connector HDR 22POS 3mm Solder RA Side Entry TH Tray
Pre-order
225,000
Factory Lead Time:15 weeks
450+$0.9471
- +
Ext. Price(USD):$852.39
MOQ:900
Mult:450
SPQ:450
Available Stock
25
Estimated Ship Time:7-12 working days
10+$13.8393
25+$9.9841
- +
Ext. Price(USD):$249.10
MOQ:18
Mult:1
SPQ:1
Pre-order
76,000
Factory Lead Time:22-26 weeks
760+$3.4625
1,140+$3.0875
5,320+$2.875
10,260+$2.7
- +
Ext. Price(USD):$2,631.50
MOQ:760
Mult:760
SPQ:760
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$5.3029
- +
Ext. Price(USD):$6,443.02
MOQ:1,215
Mult:1,215
SPQ:405
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.3708
- +
Ext. Price(USD):$1,112.40
MOQ:3,000
Mult:1,500
SPQ:500
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.322
- +
Ext. Price(USD):$966.00
MOQ:3,000
Mult:1,500
SPQ:500
Wire-to-Board HDR 18 Pos 4.2mm Solder Right Angle Side Entry Thru-Hole
Pre-order
360,000
Factory Lead Time:15 weeks
720+$1.1838
- +
Ext. Price(USD):$852.33
MOQ:720
Mult:720
SPQ:240
JST
ECAD Model:
Wire-to-Board Connector HDR 3 Pos 3.96mm Solder RA Thru-Hole
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.1319
27,000+$0.1296
45,000+$0.1264
- +
Ext. Price(USD):$1,187.10
MOQ:9,000
Mult:9,000
SPQ:9,000
JST
ECAD Model:
Conn Shrouded Header HDR 4 POS 2mm Solder ST Thru-Hole Box
Available Stock
50
Estimated Ship Time:4-6 working days
26+
1+$1.098
- +
Ext. Price(USD):$1.09
MOQ:1
Mult:1
SPQ:1
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.9541
- +
Ext. Price(USD):$2,289.84
MOQ:2,400
Mult:2,400
SPQ:800
Wire-to-Board HDR 14 Pos 4.2mm Solder ST Top Entry TH
Pre-order
877,500
Factory Lead Time:15 weeks
1,755+$5.0957
- +
Ext. Price(USD):$8,942.95
MOQ:1,755
Mult:1,755
SPQ:585
CT P/HDR ASSY V 11P W/KINK BLU
Pre-order
800,000
Factory Lead Time:22-26 weeks
8,000+$1.1
10,000+$0.9625
25,000+$0.8125
50,000+$0.7875
100,000+$0.75
- +
Ext. Price(USD):$8,800.00
MOQ:8,000
Mult:8,000
SPQ:8,000
JST
ECAD Model:
IDC Connector RCP 8 POS 2.5mm IDT RA Cable Mount Box
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.2827
18,000+$0.278
30,000+$0.271
- +
Ext. Price(USD):$1,696.20
MOQ:6,000
Mult:6,000
SPQ:6,000
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 9 POS 2mm Solder RA Thru-Hole Tube
Pre-order
468,000
Factory Lead Time:22-26 weeks
4,680+$2.025
- +
Ext. Price(USD):$9,477.00
MOQ:4,680
Mult:4,680
SPQ:4,680
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$42.7625
1,000+$37.8875
2,500+$32.475
5,000+$29.225
10,000+$25.9875
- +
Ext. Price(USD):$21,381.25
MOQ:500
Mult:500
SPQ:500
Header and PCB Receptacle Connector
Available Stock
194
Estimated Ship Time:14-17 working days
10+$2.5441
50+$1.9714
2,000+$1.4035
4,000+$1.3967
- +
Ext. Price(USD):$50.88
MOQ:20
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Unshrouded Header HDR 46 POS 2.54mm Solder ST Top Entry Thru-Hole C-Grid III Tray
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$5.375
- +
Ext. Price(USD):$16,125.00
MOQ:3,000
Mult:3,000
SPQ:3,000
JST
Package:SMD,P=2mm
ECAD Model:
Conn Shrouded Header HDR 4 POS 2mm Solder RA Side Entry SMD
Available Stock
6,987
Estimated Ship Time:5-9 working days
22+
5+$0.4497
15+$0.3425
30+$0.3367
- +
Ext. Price(USD):$2.24
MOQ:5
Mult:1
SPQ:1,000
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 2 POS 4mm Solder ST Top Entry Thru-Hole Box
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.0727
27,000+$0.0715
45,000+$0.0697
- +
Ext. Price(USD):$654.30
MOQ:9,000
Mult:9,000
SPQ:9,000
Conn Shrouded Header HDR 34 POS 1.5mm Solder ST SMD Carton/Reel
Pre-order
1,200,000
Factory Lead Time:22-26 weeks
12,000+$1.5125
25,200+$1.25
1,000,000+$0.8375
2,000,000+$0.7875
- +
Ext. Price(USD):$18,150.00
MOQ:12,000
Mult:12,000
14-Pin MTA100 HDR ASSY F/L SQ STR LF
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$0.925
1,000+$0.8875
2,500+$0.825
5,000+$0.7875
10,000+$0.75
- +
Ext. Price(USD):$231.25
MOQ:250
Mult:250
SPQ:250
JST
ECAD Model:
Conn Shrouded Header HDR 15 POS 2.5mm Solder RA Thru-Hole Box
Pre-order
18,000
Factory Lead Time:18-22 weeks
26+
1,800+$0.2427
5,400+$0.2387
9,000+$0.2327
- +
Ext. Price(USD):$436.86
MOQ:1,800
Mult:1,800
SPQ:1,800
Pre-order
114,000
Factory Lead Time:22-26 weeks
1,140+$1.55
2,280+$1.375
5,320+$1.2875
10,260+$1.2
- +
Ext. Price(USD):$1,767.00
MOQ:1,140
Mult:1,140
SPQ:1,140
PIN HEADER, 36POS, 1ROW, 2.54MM, THT;
Available Stock
38
Estimated Ship Time:6-12 working days
10+$1.3363
100+$1.3363
250+$1.3124
500+$1.3124
- +
Ext. Price(USD):$24.05
MOQ:18
Mult:1
25 / PageGoto