Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.3113
12,000+$0.2938
- +
Ext. Price(USD):$1,867.80
MOQ:6,000
Mult:6,000
SPQ:6,000
Molex
ECAD Model:
1.50mm Pitch CLIK Mate Wire to Board PCB Receptacle Dual Row Vertical SMD 0.76μm Gold Plated 10 Circuits Black
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$3.7375
8,100+$3.275
20,250+$3.2125
- +
Ext. Price(USD):$10,091.25
MOQ:2,700
Mult:2,700
Molex
ECAD Model:
Conn HDR 2 POS 6.35mm Solder ST Thru-Hole 2 Terminal 1 Port
Pre-order
183,600
Factory Lead Time:22-26 weeks
1,836+$0.3125
3,672+$0.2625
7,344+$0.2213
- +
Ext. Price(USD):$573.75
MOQ:1,836
Mult:1,836
SPQ:1,836
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.7984
- +
Ext. Price(USD):$2,427.84
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 2 POS, 4.2mm, RA, Thru-Hole
Pre-order
3,105,000
Factory Lead Time:15 weeks
6,210+$0.7573
- +
Ext. Price(USD):$4,702.83
MOQ:6,210
Mult:2,070
SPQ:2,070
Shrouded Header (4 Sides), HDR 2 Pos, 2.5mm Pitch, Solder, ST, Top Entry, Thru-Hole
Available Stock
1,970
Estimated Ship Time:6-7 working days
19+
20+$0.1979
700+$0.0801
- +
Ext. Price(USD):$3.95
MOQ:20
Mult:20
Pre-order
4,000,000
Factory Lead Time:11 weeks
8,000+$0.2629
- +
Ext. Price(USD):$2,103.20
MOQ:8,000
Mult:8,000
SPQ:8,000
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.3004
- +
Ext. Price(USD):$2,340.72
MOQ:1,800
Mult:1,800
SPQ:600
Molex
ECAD Model:
Pre-order
96,000
Factory Lead Time:22-26 weeks
960+$6.725
2,000+$5.9
5,000+$5.7625
- +
Ext. Price(USD):$6,456.00
MOQ:960
Mult:960
JST
ECAD Model:
Conn Board to Board RCP 4 POS 2mm Solder ST Thru-Hole Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.1271
36,000+$0.125
60,000+$0.1218
- +
Ext. Price(USD):$1,525.20
MOQ:12,000
Mult:12,000
SPQ:12,000
JST
ECAD Model:
Board to Board Connector, 19-Pin, 1.25mm Pitch, Solder RA Thru-Hole
Available Stock
413
Estimated Ship Time:6-7 working days
23+
20+$0.8204
400+$0.2878
- +
Ext. Price(USD):$16.40
MOQ:20
Mult:20
Conn Mezzanine HDR 21 POS 1mm Solder ST Top Entry SMD CONAN T/R
Pre-order
2,000,000
Factory Lead Time:12 weeks
4,000+$0.8688
- +
Ext. Price(USD):$3,475.20
MOQ:4,000
Mult:4,000
SPQ:4,000
Molex
ECAD Model:
Unshrouded Header, 8 Pos, 2.54mm Pitch, Solder, ST, Top Entry, Thru-Hole
Pre-order
37,500
Factory Lead Time:22-26 weeks
375+$0.2475
1,500+$0.235
- +
Ext. Price(USD):$92.81
MOQ:375
Mult:375
SPQ:375
Wire-to-Board Connector HDR 20 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
360,000
Factory Lead Time:15 weeks
720+$1.4363
- +
Ext. Price(USD):$1,034.13
MOQ:720
Mult:720
SPQ:360
Molex
ECAD Model:
Conn Wire to Board HDR 11 POS 3.96mm Solder ST Top Entry Thru-Hole
Pre-order
517,500
Factory Lead Time:22-26 weeks
5,175+$0.2388
10,350+$0.225
- +
Ext. Price(USD):$1,235.79
MOQ:5,175
Mult:5,175
SPQ:5,175
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 13 POS 1.5mm Solder ST Top Entry Thru-Hole Box
Available Stock
5,000
Estimated Ship Time:4-6 working days
22+
500+$0.2037
- +
Ext. Price(USD):$101.85
MOQ:500
Mult:500
SPQ:500
JST
ECAD Model:
Conn Wire to Board RCP 4 POS 5.08mm ST Cable Mount Box
Available Stock
25
Estimated Ship Time:6-7 working days
20+$7.4227
- +
Ext. Price(USD):$148.45
MOQ:20
Mult:20
JST
ECAD Model:
Conn Shrouded Header HDR 10 POS 1.5mm Solder RA Thru-Hole Box
Available Stock
80
Estimated Ship Time:4-6 working days
26+
1+$0.5313
- +
Ext. Price(USD):$0.53
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$4.4464
- +
Ext. Price(USD):$7,203.16
MOQ:1,620
Mult:1,620
SPQ:540
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
1,687,500
Factory Lead Time:15 weeks
3,375+$1.7705
- +
Ext. Price(USD):$5,975.43
MOQ:3,375
Mult:3,375
SPQ:1,125
Conn Shrouded Header HDR 28 POS 1.5mm Solder ST Thru-Hole Box
Available Stock
2,528
Estimated Ship Time:6-7 working days
21+
20+$0.9163
280+$0.3281
- +
Ext. Price(USD):$18.32
MOQ:20
Mult:20
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.3823
- +
Ext. Price(USD):$1,866.10
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
213,000
Factory Lead Time:22-26 weeks
2,130+$1.0625
4,260+$1.0125
5,041+$0.925
10,011+$0.875
- +
Ext. Price(USD):$2,263.12
MOQ:2,130
Mult:2,130
SPQ:2,130
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 20 POS 2mm Solder ST Top Entry SMD Tube
Pre-order
483,000
Factory Lead Time:22-26 weeks
4,830+$2.3
- +
Ext. Price(USD):$11,109.00
MOQ:4,830
Mult:4,830
SPQ:4,830
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 5 Pos 2mm Solder Straight Thru-Hole Tube
Pre-order
66,000
Factory Lead Time:22-26 weeks
660+$2.625
1,320+$2.475
- +
Ext. Price(USD):$1,732.50
MOQ:660
Mult:660
SPQ:660
25 / PageGoto