Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1.55
3,000+$1.5125
5,000+$1.25
10,000+$1.0875
25,000+$0.9625
- +
Ext. Price(USD):$2,325.00
MOQ:1,500
Mult:1,500
SPQ:1,500
Molex
ECAD Model:
Shrouded Header Connector, HDR 10 Pos, 2mm Pitch, Solder, ST, Thru-Hole, Tube
Pre-order
432,000
Factory Lead Time:22-26 weeks
4,320+$1.75
- +
Ext. Price(USD):$7,560.00
MOQ:4,320
Mult:4,320
SPQ:4,320
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1449
- +
Ext. Price(USD):$2,895.61
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector M 18 POS 3mm Solder ST Top Entry TH T/R
Available Stock
5,218
Estimated Ship Time:6-12 working days
10+$1.5008
100+$1.474
500+$1.4472
1,000+$1.4472
2,500+$1.4472
- +
Ext. Price(USD):$24.01
MOQ:16
Mult:1
1.0mm Pitch Disconnectable Crimp Style Connector
Available Stock
3,500
Estimated Ship Time:14-17 working days
100+$0.2767
300+$0.2192
5,000+$0.1638
10,000+$0.1626
- +
Ext. Price(USD):$50.08
MOQ:181
Mult:1
SPQ:1
Wire-to-Board Connector HDR, 16 POS, 3mm Pitch, Solder, ST Top Entry, Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$1.3022
- +
Ext. Price(USD):$2,461.15
MOQ:1,890
Mult:1,890
SPQ:630
Molex
ECAD Model:
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$1.325
- +
Ext. Price(USD):$6,678.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1003
- +
Ext. Price(USD):$990.27
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Connector M 24 POS 3mm Solder ST Top Entry TH T/R
Available Stock
845
Estimated Ship Time:6-12 working days
10+$1.7472
100+$1.716
250+$1.716
500+$1.6848
1,000+$1.6848
- +
Ext. Price(USD):$24.46
MOQ:14
Mult:1
Conn Shrouded Header (4 Sides) HDR 3 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
950
Estimated Ship Time:6-7 working days
20+$0.0804
- +
Ext. Price(USD):$1.60
MOQ:20
Mult:20
Shrouded Header (4 Sides) HDR 2 POS 2.5mm Solder RA Side Entry Thru-Hole Box
Available Stock
2,000
Estimated Ship Time:8-12 working days
23+
1,000+$0.0343
- +
Ext. Price(USD):$34.30
MOQ:1,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.875
- +
Ext. Price(USD):$2,625.00
MOQ:3,000
Mult:3,000
SPQ:3,000
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9471
- +
Ext. Price(USD):$1,136.52
MOQ:1,200
Mult:1,200
SPQ:400
multicomp
ECAD Model:
Shrouded Header Connector (4 Sides) HDR 4 Pos 5.08mm Solder Straight Thru-Hole
Available Stock
207
Estimated Ship Time:6-12 working days
5+$0.616
50+$0.5913
2,500+$0.5322
5,000+$0.5322
- +
Ext. Price(USD):$24.64
MOQ:40
Mult:5
Minitek Pwr3.0 Wtb Header Dual Row
Pre-order
360,000
Factory Lead Time:15 weeks
720+$0.7486
- +
Ext. Price(USD):$1,077.98
MOQ:1,440
Mult:720
SPQ:720
Molex
ECAD Model:
Conn IDC Connector F 12 POS 2.5mm IDT RA Cable Mount Tray
Pre-order
480,000
Factory Lead Time:22-26 weeks
4,800+$1.3375
- +
Ext. Price(USD):$6,420.00
MOQ:4,800
Mult:4,800
SPQ:4,800
Molex
ECAD Model:
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$2.825
4,000+$2.4625
10,000+$2.4125
- +
Ext. Price(USD):$4,237.50
MOQ:1,500
Mult:1,500
Wire-to-Board Connector HDR 10 Pos 3mm Solder ST Top Entry TH
Pre-order
1,417,500
Factory Lead Time:15 weeks
2,835+$0.9906
- +
Ext. Price(USD):$2,808.35
MOQ:2,835
Mult:2,835
SPQ:945
Wire to Board HDR 6 POS 3mm Solder ST Top Entry Thru-Hole Tray
Pre-order
2,092,500
Factory Lead Time:15 weeks
4,185+$0.874
- +
Ext. Price(USD):$3,657.69
MOQ:4,185
Mult:1,395
SPQ:1,395
Available Stock
952
Estimated Ship Time:14-17 working days
100+$0.4014
300+$0.3439
4,000+$0.2714
5,000+$0.2714
- +
Ext. Price(USD):$50.17
MOQ:125
Mult:1
SPQ:1
Molex
Package:SMD,P=1.5mm
ECAD Model:
1.50mm Pitch CLIK Mate Wire-to-Board Receptacle, Dual Row, SMD, Vertical, 0.38μm Gold Plating, 14 Circuits, Black
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$2.5125
4,050+$2.2
10,350+$2.1625
- +
Ext. Price(USD):$4,522.50
MOQ:1,800
Mult:1,800
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.9899
- +
Ext. Price(USD):$1,790.91
MOQ:900
Mult:900
SPQ:450
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 44 POS 2mm Solder RA Thru-Hole Milli-Grid™ Tube
Pre-order
55,000
Factory Lead Time:22-26 weeks
550+$4.5875
1,100+$4.4875
2,500+$3.9125
5,000+$3.65
- +
Ext. Price(USD):$2,523.12
MOQ:550
Mult:550
SPQ:550
Wire-to-Board Connector Header 8-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$0.6267
- +
Ext. Price(USD):$1,184.46
MOQ:1,890
Mult:1,890
SPQ:630
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 52 POS 2.54mm Solder ST Thru-Hole C-Grid® Tube
Pre-order
8,400
Factory Lead Time:22-26 weeks
84+$7.45
168+$7.3125
336+$6.9125
500+$5.7625
1,000+$4.8
- +
Ext. Price(USD):$625.80
MOQ:84
Mult:84
SPQ:84
25 / PageGoto