Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.5877
- +
Ext. Price(USD):$2,381.55
MOQ:1,500
Mult:1,500
SPQ:500
Shrouded Header
Available Stock
490
Estimated Ship Time:14-17 working days
100+$0.2987
300+$0.2411
5,000+$0.1774
10,000+$0.1763
- +
Ext. Price(USD):$50.18
MOQ:168
Mult:1
SPQ:1
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4892
- +
Ext. Price(USD):$733.80
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
500,000
Factory Lead Time:15 weeks
1,000+$0.8827
- +
Ext. Price(USD):$882.70
MOQ:1,000
Mult:1,000
SPQ:500
JST
ECAD Model:
1.0mm Pitch Disconnectable Crimp Style Connectors
Pre-order
1,840,000
Factory Lead Time:16-18 weeks
184,000+$0.0177
- +
Ext. Price(USD):$3,256.80
MOQ:184,000
Mult:184,000
Wire-to-Board Connector HDR 18 Pos 3mm Solder Straight Top Entry TH
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$1.4223
- +
Ext. Price(USD):$2,304.12
MOQ:1,620
Mult:1,620
SPQ:540
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.619
- +
Ext. Price(USD):$2,185.65
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.6546
- +
Ext. Price(USD):$785.52
MOQ:1,200
Mult:400
SPQ:400
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$3.5463
- +
Ext. Price(USD):$5,319.45
MOQ:1,500
Mult:500
SPQ:500
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 16 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
16,500
Estimated Ship Time:5-7 working days
22+
500+$0.1849
- +
Ext. Price(USD):$92.45
MOQ:500
Mult:500
SPQ:500
JST
ECAD Model:
Conn IDC Connector F 3 POS 2mm IDT RA Cable Mount Box
Pre-order
480,000
Factory Lead Time:18-22 weeks
26+
48,000+$0.1026
144,000+$0.1009
240,000+$0.0983
- +
Ext. Price(USD):$4,924.80
MOQ:48,000
Mult:48,000
SPQ:48,000
JST
ECAD Model:
Conn Board to Board SKT 7 POS 2.5mm Solder RA Thru-Hole Box
Available Stock
5,260
Estimated Ship Time:6-7 working days
23+
20+$0.3804
250+$0.1335
- +
Ext. Price(USD):$7.60
MOQ:20
Mult:20
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
Conn Board to Board RCP 60 POS 0.8mm Solder ST Top Entry SMD BergStik® T/R
Pre-order
600,000
Factory Lead Time:8 weeks
1,200+$1.7723
- +
Ext. Price(USD):$2,126.76
MOQ:1,200
Mult:300
SPQ:300
Shrouded Header, 10 Pos, 5.08mm Pitch, Solder, ST, TH
Available Stock
84
Estimated Ship Time:14-17 working days
10+$2.5701
30+$1.9961
500+$1.4742
1,000+$1.4672
- +
Ext. Price(USD):$51.40
MOQ:20
Mult:1
SPQ:1
Pre-order
228,000
Factory Lead Time:22-26 weeks
2,280+$2.0125
5,320+$1.8625
10,260+$1.7625
- +
Ext. Price(USD):$4,588.50
MOQ:2,280
Mult:2,280
SPQ:2,280
Wire-to-Board HDR, 8 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$2.3798
- +
Ext. Price(USD):$4,497.82
MOQ:1,890
Mult:1,890
SPQ:630
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.6981
- +
Ext. Price(USD):$837.72
MOQ:1,200
Mult:1,200
SPQ:400
High Power DIP Header Connector
Pre-order
3,150,000
Factory Lead Time:15 weeks
6,300+$2.0491
- +
Ext. Price(USD):$12,909.33
MOQ:6,300
Mult:6,300
SPQ:2,100
JST
ECAD Model:
Unshrouded Header, 6 Pos, 8mm Pitch, Solder Straight Thru-Hole
Available Stock
200
Estimated Ship Time:6-7 working days
21+
200+$0.3334
- +
Ext. Price(USD):$66.68
MOQ:200
Mult:200
JST
ECAD Model:
Conn Board to Board RCP 6 POS 2mm Solder RA Thru-Hole Box
Available Stock
1,500
Estimated Ship Time:6-7 working days
25+
500+$0.118
- +
Ext. Price(USD):$59.00
MOQ:500
Mult:500
Wire-to-Board Header 16-Pos 4.2mm RA Side Entry TH Tray
Pre-order
495,000
Factory Lead Time:15 weeks
990+$5.5379
- +
Ext. Price(USD):$5,482.52
MOQ:990
Mult:990
SPQ:330
Conn Datamate M 5Power POS 4mm Solder ST Thru-Hole Pack
Available Stock
9
Estimated Ship Time:7-12 working days
1+$61.3872
10+$59.6079
25+$58.3228
- +
Ext. Price(USD):$245.54
MOQ:4
Mult:1
SPQ:1
JST 2.0mm Pitch 40P Double Row Header Wire-to-Board Connector, PUD Series, Right Angle, SMD
Available Stock
830
Estimated Ship Time:6-7 working days
24+
20+$2.7643
400+$1.2562
- +
Ext. Price(USD):$55.28
MOQ:20
Mult:20
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.7664
- +
Ext. Price(USD):$3,734.64
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3753
- +
Ext. Price(USD):$1,237.77
MOQ:900
Mult:900
SPQ:300
25 / PageGoto