Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
multicomp
ECAD Model:
Conn Shrouded Header HDR 12 POS 3.81mm Solder ST Top Entry Thru-Hole
Available Stock
100
Estimated Ship Time:6-12 working days
10+$1.8188
25+$1.6296
1,000+$1.5714
1,500+$1.5714
- +
Ext. Price(USD):$25.46
MOQ:14
Mult:1
TUBE PACKING AMP CT CONN. POST HDR ASSY BOX-V DIP
Pre-order
187,500
Factory Lead Time:22-26 weeks
1,875+$0.575
3,750+$0.5
5,000+$0.4375
10,000+$0.3875
25,000+$0.32
- +
Ext. Price(USD):$1,078.12
MOQ:1,875
Mult:1,875
SPQ:1,875
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.5049
- +
Ext. Price(USD):$908.82
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.5135
- +
Ext. Price(USD):$693.22
MOQ:1,350
Mult:1,350
SPQ:450
Hybrid PCB Right Angle Connector
Available Stock
177
Estimated Ship Time:4-6 working days
1+$1.411
100+$1.2958
- +
Ext. Price(USD):$1.41
MOQ:1
Mult:1
SPQ:1
Conn Shrouded Header HDR 28 POS 2mm Solder ST Thru-Hole Loose
Pre-order
1,024,000
Factory Lead Time:22-26 weeks
10,240+$0.5125
25,120+$0.4625
50,080+$0.4375
100,000+$0.4125
- +
Ext. Price(USD):$5,248.00
MOQ:10,240
Mult:10,240
High Power DIP Header Connector
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$2.2249
- +
Ext. Price(USD):$11,346.99
MOQ:5,100
Mult:5,100
SPQ:1,700
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7626
- +
Ext. Price(USD):$1,372.68
MOQ:1,800
Mult:1,800
SPQ:600
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
3,150,000
Factory Lead Time:15 weeks
6,300+$0.9766
- +
Ext. Price(USD):$6,152.58
MOQ:6,300
Mult:6,300
SPQ:2,100
JST
ECAD Model:
Board to Board Connector PL 16 Pos 1.25mm Solder ST Thru-Hole Box
Available Stock
880
Estimated Ship Time:6-7 working days
22+
20+$0.6217
500+$0.253
- +
Ext. Price(USD):$12.43
MOQ:20
Mult:20
Pre-order
700
Factory Lead Time:22-26 weeks
7+$72.45
13+$59.6625
50+$53.35
- +
Ext. Price(USD):$507.15
MOQ:7
Mult:7
SPQ:7
JST
ECAD Model:
Conn Shrouded Header HDR 7 POS 2mm Solder ST Thru-Hole Box
Available Stock
750
Estimated Ship Time:3-5 working days
17+
100+$0.1205
200+$0.1165
300+$0.1135
- +
Ext. Price(USD):$12.05
MOQ:100
Mult:1
SPQ:200
Molex
ECAD Model:
Pre-order
96,000
Factory Lead Time:22-26 weeks
960+$7.0625
2,000+$6.1875
5,000+$6.05
- +
Ext. Price(USD):$6,780.00
MOQ:960
Mult:960
JST
ECAD Model:
IDC Connector RCP 5 POS 2.5mm IDT RA Cable Mount Box
Available Stock
363
Estimated Ship Time:6-7 working days
20+$0.3996
- +
Ext. Price(USD):$7.99
MOQ:20
Mult:20
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 8 POS 2mm Solder RA Thru-Hole Tube
Pre-order
435,000
Factory Lead Time:22-26 weeks
4,350+$1.925
- +
Ext. Price(USD):$8,373.75
MOQ:4,350
Mult:4,350
SPQ:4,350
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.8481
- +
Ext. Price(USD):$3,844.93
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector HDR 10 Pos 3mm Solder RA Side Entry TH Tray
Pre-order
472,500
Factory Lead Time:15 weeks
945+$0.5763
- +
Ext. Price(USD):$1,089.20
MOQ:1,890
Mult:945
SPQ:945
Wire-to-Board HDR 14 Pos 4.2mm Solder ST Top Entry TH
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$5.1462
- +
Ext. Price(USD):$7,642.10
MOQ:1,485
Mult:1,485
SPQ:495
Molex
ECAD Model:
Conn Header RCP 2 POS 6.35MM SOLDER ST THRU-HOLE 2 TERMINAL 1 PORT BAG
Pre-order
367,200
Factory Lead Time:22-26 weeks
3,672+$0.3875
7,344+$0.3713
10,000+$0.3363
25,000+$0.3275
- +
Ext. Price(USD):$1,422.90
MOQ:3,672
Mult:3,672
SPQ:3,672
Molex
ECAD Model:
Pre-order
72,000
Factory Lead Time:25-42 weeks
720+$2.5718
- +
Ext. Price(USD):$1,851.69
MOQ:720
Mult:120
SPQ:120
Wire to Board HDR 18 POS 2.54mm Solder RA Thru-Hole
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$4.2
1,000+$3.975
2,500+$3.7
5,000+$3.525
10,000+$3.4
- +
Ext. Price(USD):$2,100.00
MOQ:500
Mult:500
SPQ:500
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.515
- +
Ext. Price(USD):$4,745.25
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1438
- +
Ext. Price(USD):$1,029.42
MOQ:900
Mult:300
SPQ:300
PCB Connector, CS Series, Top Base, 31W
Pre-order
19,200
Factory Lead Time:16-18 weeks
1,920+$0.6441
- +
Ext. Price(USD):$1,236.67
MOQ:1,920
Mult:1,920
Molex
ECAD Model:
Board to Board Connector 140 Pos 0.5mm Solder Straight SMD SlimStack T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
25 / PageGoto