Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Header Plug, Pin Header, 2.54mm Pitch, Vertical, 1x2Pin, Gold Flash, LCP, 6.0mm × 2.5mm × 3.0mm
Available Stock
720
Estimated Ship Time:5-7 working days
21+
720+$0.3263
- +
Ext. Price(USD):$234.93
MOQ:720
Mult:720
SPQ:720
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8688
- +
Ext. Price(USD):$1,303.20
MOQ:1,500
Mult:1,500
SPQ:500
Conn Socket Strip SKT 4 POS 2.54mm Solder ST Thru-Hole Automotive Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$0.8125
10,024+$0.7625
25,032+$0.725
- +
Ext. Price(USD):$4,095.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Wire-to-Board HDR, 18 Pos, 4.2mm Pitch, Solder, ST Top Entry, TH, Tray
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$6.9411
- +
Ext. Price(USD):$7,496.38
MOQ:1,080
Mult:360
SPQ:360
JST
ECAD Model:
Conn Shrouded Header HDR 6 POS 2mm Solder RA Thru-Hole Box
Pre-order
102,000
Factory Lead Time:16-18 weeks
10,200+$0.0772
- +
Ext. Price(USD):$787.44
MOQ:10,200
Mult:10,200
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$2.9335
- +
Ext. Price(USD):$5,544.31
MOQ:1,890
Mult:945
SPQ:945
Molex
ECAD Model:
W-T-B Header, 1.50mm Pitch, Nylon Glass Filled Housing
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.5875
4,000+$0.5625
- +
Ext. Price(USD):$1,175.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Wire-to-Board HDR 16-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$1.5024
- +
Ext. Price(USD):$2,839.53
MOQ:1,890
Mult:1,890
SPQ:630
Conn Shrouded Header HDR 13 POS 1.5mm Solder RA Thru-Hole Box
Available Stock
2,208
Estimated Ship Time:6-7 working days
21+
20+$0.6842
360+$0.2767
- +
Ext. Price(USD):$13.68
MOQ:20
Mult:20
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.9819
- +
Ext. Price(USD):$2,356.56
MOQ:2,400
Mult:2,400
SPQ:800
JST
ECAD Model:
Conn Shrouded Header HDR 2 POS 2mm Solder RA Thru-Hole Automotive Box
Available Stock
15,000
Estimated Ship Time:4-6 working days
1,000+$0.0959
- +
Ext. Price(USD):$95.90
MOQ:1,000
Mult:1,000
SPQ:1,000
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Header Single Row Right Angle Through Hole
Pre-order
3,150,000
Factory Lead Time:15 weeks
6,300+$1.1508
- +
Ext. Price(USD):$7,250.04
MOQ:6,300
Mult:6,300
SPQ:2,100
Molex
ECAD Model:
Pre-order
58,000
Factory Lead Time:22-26 weeks
580+$0.525
2,320+$0.4875
- +
Ext. Price(USD):$304.50
MOQ:580
Mult:580
SPQ:580
Molex
ECAD Model:
Wire-to-Board Connector, Plug, 8 Power Pos, 2mm/2.5mm Pitch, Solder RA Thru-Hole Tray
Pre-order
35,000
Factory Lead Time:22-26 weeks
350+$6.3
700+$6.1375
1,000+$5.9625
- +
Ext. Price(USD):$2,205.00
MOQ:350
Mult:350
SPQ:350
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7869
- +
Ext. Price(USD):$1,416.42
MOQ:1,800
Mult:1,800
SPQ:600
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
Pre-order
400,000
Factory Lead Time:6 weeks
800+$1.6017
- +
Ext. Price(USD):$1,281.36
MOQ:800
Mult:400
SPQ:400
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.5153
- +
Ext. Price(USD):$927.54
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
80
Estimated Ship Time:4-6 working days
26+
20+$1.4167
- +
Ext. Price(USD):$28.33
MOQ:20
Mult:20
SPQ:1
1.25mm Pitch Connector Header, Vertical
Pre-order
5,500,000
Factory Lead Time:11 weeks
11,000+$0.1672
- +
Ext. Price(USD):$1,839.20
MOQ:11,000
Mult:11,000
SPQ:11,000
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.688
- +
Ext. Price(USD):$4,032.00
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.8949
- +
Ext. Price(USD):$805.41
MOQ:900
Mult:300
SPQ:300
Molex
ECAD Model:
Wire-to-Board HDR 36 Pos 1.25mm Solder ST Top Entry SMD T/R
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$2.4875
4,000+$2.175
10,000+$2.1375
- +
Ext. Price(USD):$3,731.25
MOQ:1,500
Mult:1,500
JST
ECAD Model:
Board to Board Connector Receptacle 10 Pos 2mm Solder Right Angle Thru-Hole
Available Stock
185
Estimated Ship Time:14-17 working days
100+$0.3165
500+$0.2819
1,000+$0.2743
2,000+$0.2492
4,000+$0.248
- +
Ext. Price(USD):$50.00
MOQ:158
Mult:1
SPQ:1
IDC Connector SKT 16 Pos 2.5mm IDT RA Cable Mount
Pre-order
1,260,000
Factory Lead Time:22-26 weeks
12,600+$1.8875
- +
Ext. Price(USD):$23,782.50
MOQ:12,600
Mult:12,600
SPQ:12,600
Wire-to-Board Connector, Receptacle, 26 POS, 1.27mm, IDT, ST, Cable Mount
Available Stock
503
Estimated Ship Time:6-12 working days
1+$4.1225
10+$3.6278
500+$3.5618
1,000+$3.5618
- +
Ext. Price(USD):$24.73
MOQ:6
Mult:1
25 / PageGoto