Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.5181
- +
Ext. Price(USD):$1,366.29
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.6703
- +
Ext. Price(USD):$804.36
MOQ:1,200
Mult:1,200
SPQ:400
Conn Shrouded Header HDR 15 POS 2mm Solder ST Thru-Hole Bag/Box
Pre-order
800,000
Factory Lead Time:22-26 weeks
8,000+$0.75
10,000+$0.6625
750,000+$0.3875
1,000,000+$0.3675
- +
Ext. Price(USD):$6,000.00
MOQ:8,000
Mult:8,000
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0219
- +
Ext. Price(USD):$1,226.28
MOQ:1,200
Mult:400
SPQ:400
JST
ECAD Model:
Conn Shrouded Header HDR 8 POS 2mm Solder ST SMD T/R
Available Stock
1,400
Estimated Ship Time:4-6 working days
700+$0.2919
- +
Ext. Price(USD):$204.33
MOQ:700
Mult:700
SPQ:700
Conn Unshrouded Header HDR 16 POS 2.54mm Solder ST Thru-Hole Carton
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$4.0375
1,000+$3.8125
5,000+$2.8125
10,000+$2.175
50,000+$1.8
- +
Ext. Price(USD):$2,018.75
MOQ:500
Mult:500
SPQ:500
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$1.2378
- +
Ext. Price(USD):$3,564.86
MOQ:2,880
Mult:2,880
SPQ:960
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.0254
- +
Ext. Price(USD):$1,384.29
MOQ:1,350
Mult:1,350
SPQ:675
Amphenol
ECAD Model:
Conn Shrouded Header RCP 6 POS 2.54mm Solder RA Thru-Hole Tray
Pre-order
200,000
Factory Lead Time:8 weeks
400+$2.0404
- +
Ext. Price(USD):$816.16
MOQ:400
Mult:400
SPQ:400
Conn Shrouded Header (4 Sides) PIN 4 POS 2.5mm Solder RA SMD T/R
Pre-order
350,000
Factory Lead Time:22-26 weeks
3,500+$1.1125
7,000+$0.95
500,500+$0.525
1,001,000+$0.5125
- +
Ext. Price(USD):$3,893.75
MOQ:3,500
Mult:3,500
Wire-to-Board Connector Header 24 Pos 3mm Solder Straight Top Entry Thru-Hole
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1814
- +
Ext. Price(USD):$2,944.89
MOQ:1,350
Mult:1,350
SPQ:450
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Vertical SMT Tails Hold Down Tin Plated Natural Color 8 Pos Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:13 weeks
6,000+$1.1142
- +
Ext. Price(USD):$6,685.20
MOQ:6,000
Mult:6,000
SPQ:1,200
Molex
ECAD Model:
Wire to Board Connector HDR 4POS 2mm Solder Right Angle Thru-Hole Bag
Available Stock
40
Estimated Ship Time:3-5 working days
06+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.9359
- +
Ext. Price(USD):$2,903.85
MOQ:1,500
Mult:1,500
SPQ:500
Header 90° Mate-N-Lok Sealed 1-Port
Pre-order
17,500
Factory Lead Time:22-26 weeks
175+$19.35
- +
Ext. Price(USD):$3,386.25
MOQ:175
Mult:175
SPQ:175
Shrouded Header HDR 2 POS 6mm Solder RA Thru-Hole Box
Available Stock
1,185
Estimated Ship Time:4-6 working days
1+$6.5206
120+$2.5888
- +
Ext. Price(USD):$6.52
MOQ:1
Mult:1
SPQ:120
Molex
ECAD Model:
Available Stock
40
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
1.25mm Pitch Micro Lock Plus PCB Header Vertical SMD 0.38um Gold Plating 14 Circuits Tape & Reel Black
Pre-order
360,000
Factory Lead Time:22-26 weeks
3,600+$1.225
8,400+$1.075
20,400+$1.05
- +
Ext. Price(USD):$4,410.00
MOQ:3,600
Mult:3,600
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.5588
- +
Ext. Price(USD):$754.38
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$3.1024
- +
Ext. Price(USD):$4,653.60
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.5268
- +
Ext. Price(USD):$2,061.18
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Shrouded Header HDR 5 POS 2mm Solder ST Thru-Hole Automotive Box
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.1155
72,000+$0.1135
120,000+$0.1107
- +
Ext. Price(USD):$2,772.00
MOQ:24,000
Mult:24,000
SPQ:24,000
JST
ECAD Model:
Conn Shrouded Header HDR 9 POS 2mm Solder ST Thru-Hole Box
Available Stock
500
Estimated Ship Time:6-7 working days
22+
500+$0.0741
- +
Ext. Price(USD):$37.05
MOQ:500
Mult:500
Molex
ECAD Model:
Mgrid Side Receptacle, SMT
Pre-order
48,000
Factory Lead Time:22-26 weeks
480+$3.8
960+$3.6875
1,000+$3.5875
- +
Ext. Price(USD):$1,824.00
MOQ:480
Mult:480
SPQ:480
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 14 POS 2mm Solder ST Top Entry SMD Tube
Pre-order
448,000
Factory Lead Time:22-26 weeks
4,480+$1.5
- +
Ext. Price(USD):$6,720.00
MOQ:4,480
Mult:4,480
SPQ:4,480
25 / PageGoto