Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.008
- +
Ext. Price(USD):$1,360.80
MOQ:1,350
Mult:1,350
SPQ:450
Conn Board to Board PL 40 POS 0.5mm Solder ST SMD SlimStack™ T/R
Pre-order
75,000
Factory Lead Time:22-26 weeks
750+$0.7
- +
Ext. Price(USD):$525.00
MOQ:750
Mult:750
JST
ECAD Model:
Conn Board to Board RCP 10 POS 2mm Solder ST Thru-Hole Box
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.3014
18,000+$0.2964
30,000+$0.2888
- +
Ext. Price(USD):$1,808.40
MOQ:6,000
Mult:6,000
SPQ:6,000
Conn Shrouded Header (4 Sides) HDR 5 POS 2mm Solder ST Top Entry SMD T/R
Available Stock
935
Estimated Ship Time:6-7 working days
23+
20+$0.8733
500+$0.2969
- +
Ext. Price(USD):$17.46
MOQ:20
Mult:20
Pre-order
114,000
Factory Lead Time:22-26 weeks
1,140+$1.5
2,280+$1.3375
5,320+$1.25
10,260+$1.175
- +
Ext. Price(USD):$1,710.00
MOQ:1,140
Mult:1,140
SPQ:1,140
Conn Shrouded Header HDR 6 POS 3.81mm Solder RA Thru-Hole Box
Available Stock
69
Estimated Ship Time:14-17 working days
10+$2.4756
50+$1.9166
2,000+$1.3639
4,000+$1.3571
- +
Ext. Price(USD):$51.98
MOQ:21
Mult:1
SPQ:1
Conn Ejector Header HDR 26 POS 2.54mm Solder ST Thru-Hole Box
Available Stock
25
Estimated Ship Time:6-7 working days
20+$2.8272
- +
Ext. Price(USD):$56.54
MOQ:20
Mult:20
Wire-to-Board Connector Header 10 Pos 4.2mm Pitch Solder RA Side Entry TH
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$0.7155
- +
Ext. Price(USD):$901.53
MOQ:1,260
Mult:1,260
SPQ:420
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$0.5153
- +
Ext. Price(USD):$1,298.55
MOQ:2,520
Mult:2,520
SPQ:840
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6512
- +
Ext. Price(USD):$1,172.16
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
IDC Connector RCP 4 Pos 2mm IDT ST Cable Mount Automotive
Pre-order
240,000
Factory Lead Time:16-18 weeks
24,000+$0.0954
- +
Ext. Price(USD):$2,289.60
MOQ:24,000
Mult:24,000
Molex
ECAD Model:
Shrouded Header HDR 12 POS 2.5mm Solder ST Thru-Hole Bag
Available Stock
6
Estimated Ship Time:3-5 working days
07+
1+$0.2175
30+$0.2138
50+$0.2062
- +
Ext. Price(USD):$0.21
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Wire-to-Board Connector Plug 20 POS 2.54mm Solder RA Thru-Hole EXTreme PowerPlus Tray
Pre-order
24,000
Factory Lead Time:22-26 weeks
240+$5.025
800+$4.4
2,000+$4.3125
- +
Ext. Price(USD):$1,206.00
MOQ:240
Mult:240
SAS PCIE 4.0, 68PIN, SOCKET, VERTICAL;
Available Stock
223
Estimated Ship Time:6-12 working days
1+$7.925
10+$6.974
500+$6.8472
1,000+$6.8472
- +
Ext. Price(USD):$31.70
MOQ:4
Mult:1
Molex
ECAD Model:
Conn Unshrouded Header HDR 4 POS 2.54mm Solder RA Side Entry Thru-Hole KK Bulk
Pre-order
1,200,000
Factory Lead Time:22-26 weeks
12,000+$0.1325
24,000+$0.125
- +
Ext. Price(USD):$1,590.00
MOQ:12,000
Mult:12,000
SPQ:12,000
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.3659
- +
Ext. Price(USD):$3,548.85
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$5.5901
- +
Ext. Price(USD):$5,031.09
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9349
- +
Ext. Price(USD):$1,121.88
MOQ:1,200
Mult:400
SPQ:400
Wire-to-Board Connector Header 8-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$0.6894
- +
Ext. Price(USD):$1,116.82
MOQ:1,620
Mult:1,620
SPQ:540
Shrouded Header HDR 4 POS 2.5mm Solder ST Top Entry Thru-Hole
Pre-order
30,000
Factory Lead Time:16-18 weeks
3,000+$0.6442
- +
Ext. Price(USD):$1,932.60
MOQ:3,000
Mult:3,000
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.9327
- +
Ext. Price(USD):$5,309.14
MOQ:1,350
Mult:675
SPQ:675
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.7225
- +
Ext. Price(USD):$1,950.75
MOQ:2,700
Mult:2,700
SPQ:900
JST
ECAD Model:
Shrouded Header HDR 2 Pos 2mm Solder Straight SMD T/R
Pre-order
80,000
Factory Lead Time:18-22 weeks
26+
8,000+$0.1486
24,000+$0.1461
40,000+$0.1424
- +
Ext. Price(USD):$1,188.80
MOQ:8,000
Mult:8,000
SPQ:8,000
JST
ECAD Model:
Conn Shrouded Header HDR 20 POS 1mm Solder RA SMD T/R
Available Stock
4,336
Estimated Ship Time:6-7 working days
24+
20+$1.0604
1,000+$0.4314
- +
Ext. Price(USD):$21.20
MOQ:20
Mult:20
Conn Shrouded Header (4 Sides), HDR 7 POS, 2mm, Solder ST Top Entry, SMD, T/R
Available Stock
334
Estimated Ship Time:6-7 working days
20+$0.6904
- +
Ext. Price(USD):$13.80
MOQ:20
Mult:20
25 / PageGoto