Female Socket Headers

Results:

Female socket headers receive male pins to create removable PCB, module and board-to-board connections. Begin with the mating pin’s pitch, cross-section and contact arrangement, then define the acceptable insertion depth, socket height, entry direction and PCB termination needed for a mechanically secure and electrically stable connection.

Build the Mating Pair from the Male Pin

  1. Match the contact layout. Confirm pitch, number of positions, number of rows, row spacing and any intentionally unpopulated positions.
  2. Check the pin envelope. Compare the male pin’s width, thickness, shape and plating with the socket’s accepted contact range.
  3. Calculate contact engagement. The exposed male post must reach the female contact’s working area without exceeding its maximum insertion depth.
  4. Confirm polarization. Shrouds, keys, locating features and pin-one orientation must align across both halves.

Use Male Pin Headers to identify the corresponding exposed-pin connector before approving the female socket.

Check the Contact Engagement Window

Pitch compatibility does not confirm a complete match. The socket contact must grip the specified male pin and maintain enough overlap for the expected current, signal and mechanical conditions.

Drawing Field Required Comparison Mismatch Risk
Accepted pin size Male contact width, thickness and cross-section Loose contact or damaged spring beams
Minimum insertion depth Available male post length after accounting for body height Incomplete engagement or unstable resistance
Maximum insertion depth Post length entering the socket cavity Bottoming out or permanent contact deformation
Contact finish Female and male mating-surface plating Accelerated wear or inconsistent contact performance

Set the Installed Connection Height

Determine the finished assembly height from the female socket body, male header insulator, exposed post and actual mating overlap. For module sockets, confirm that the module seats at the intended height without contacting nearby components. For two-PCB assemblies, verify parallel-board spacing, component clearance and access for separation.

Height check: Female body height + exposed male structure − mating overlap = approximate installed connection height. Use the manufacturer drawings for the final tolerance calculation.

If controlled board spacing, elevated PCBs or pass-through contacts are the primary requirement, compare Board Stacking Connectors.

Select the Entry and PCB Side

Top-entry Choose for perpendicular mating above the PCB; check overhead clearance and extraction space.
Side-entry Choose for board-edge access or low-profile assemblies; confirm lateral keepout space.
Through-hole Match the finished-hole pattern, board thickness and solder-tail length.
Surface-mount Verify the recommended land pattern, coplanarity, locating features and reflow limits.

Unusual contact layouts, non-standard pin lengths or application-specific mating geometry may require Special Pin Headers. For additional guidance on header pitch, rows, mounting styles, pin dimensions and alternative-part evaluation, see the PCB Pin Header Selection Guide.

Record Both Halves in the BOM

Record the male and female part numbers together with pitch, positions, rows, accepted pin size, insertion-depth range, body height, installed height, entry direction, PCB mounting, plating and electrical ratings. Retaining both drawings and the approved mating combination helps prevent replacements that match the footprint but fail at the contact interface.

Read More
Female Socket HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Locking Ramp Receptacle 3.96mm 1 10-Pin 5A 2.54μm Tin TH 39.52mm(L) × 11.92mm(H)
Pre-order
15,400
Factory Lead Time:22-26 weeks
154+$1.05
308+$1.025
616+$0.9625
1,000+$0.8125
2,500+$0.7
- +
Ext. Price(USD):$161.70
MOQ:154
Mult:154
SPQ:154
Molex
ECAD Model:
Locking Ramp Receptacle 3.96mm 1 6-Pin 5A 2.54μm Tin TH 23.67mm(L) × 11.92mm(H)
Pre-order
25,100
Factory Lead Time:22-26 weeks
251+$0.5625
501+$0.5125
1,001+$0.4875
2,500+$0.425
5,000+$0.3875
- +
Ext. Price(USD):$141.18
MOQ:251
Mult:251
SPQ:251
Molex
ECAD Model:
2A SMD 26.8mm L × 8.5mm H
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.1375
8,000+$1
20,000+$0.9625
- +
Ext. Price(USD):$3,412.50
MOQ:3,000
Mult:3,000
Molex
ECAD Model:
Push-Pull Receptacle 2.54mm 1 9-Pin 2.5A 2.54μm Tin White Board Mount, Edge Mount, TH 22.76mm × 7.9mm × 7.9mm
Available Stock
1,424
Estimated Ship Time:7-9 working days
24+
213+$0.55
550+$0.539
20,000+$0.429
40,000+$0.407
- +
Ext. Price(USD):$117.15
MOQ:213
Mult:1
SPQ:1
Molex
Package:SMD,P=2mm
ECAD Model:
Header, Push-Pull 2mm 20Pin 1A 2.5μm Tin SMD P=2mm
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1.5375
3,000+$1.45
- +
Ext. Price(USD):$2,306.25
MOQ:1,500
Mult:1,500
SPQ:1,500
Amphenol
ECAD Model:
Connector Receptacle, SMD, Push-Pull, 24-Pin, 2.54mm Pitch, 3A, 2μm, Tin, Gray
Pre-order
9,120
Factory Lead Time:10-16 weeks
24+
912+$1.3823
1,216+$1.3462
- +
Ext. Price(USD):$1,260.65
MOQ:912
Mult:304
SPQ:304
Bottom/Top Entry, Push-Pull, Receptacle 2.54mm, 2-Pos, 54Pin, 3A, 2μm Tin, Gray, SMD
Pre-order
3,000
Factory Lead Time:10-16 weeks
24+
300+$3.8918
600+$3.7902
- +
Ext. Price(USD):$1,167.54
MOQ:300
Mult:300
SPQ:300
Amphenol
ECAD Model:
Push-Pull Receptacle 2.54mm 1 27-Pin 3A 760nm Gold Blue TH 68.5mm(L) × 2.5mm(H)
Pre-order
7,200
Factory Lead Time:10-16 weeks
24+
720+$1.6969
960+$1.6527
- +
Ext. Price(USD):$1,221.76
MOQ:720
Mult:240
SPQ:240
Push-Pull Receptacle, 2mm Pitch, 34-Pin, 2A, 380nm, Gold Plated, Black, SMD
Pre-order
10,200
Factory Lead Time:10-16 weeks
24+
1,020+$3.5588
1,530+$3.4659
- +
Ext. Price(USD):$3,629.97
MOQ:1,020
Mult:510
SPQ:510
Push-Pull Receptacle, 2.54mm Pitch, 20 Pos, 2A, 2.54μm Plating, Tin-Lead, Black, TH
Pre-order
132,000
Factory Lead Time:25-42 weeks
1,320+$2.6075
- +
Ext. Price(USD):$3,441.90
MOQ:1,320
Mult:22
SPQ:22
HARTING
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 2 Pos, 10 Pin, 1A, Gold Plated, TH
Available Stock
157
Estimated Ship Time:6-12 working days
1+$5.4563
10+$4.8015
100+$4.8015
250+$4.7142
500+$4.7142
- +
Ext. Price(USD):$27.28
MOQ:5
Mult:1
Molex
ECAD Model:
Locking Ramp Receptacle, 3.96mm, 3-Pin, 5A, 380nm, Gold-Plated, TH
Pre-order
207,900
Factory Lead Time:22-26 weeks
2,079+$0.525
8,000+$0.4625
20,000+$0.45
- +
Ext. Price(USD):$1,091.47
MOQ:2,079
Mult:2,079
Receptacle Bottom/Top Entry Push-Pull 2.54mm 2 Pos 30-Pin 2A Gold Plated Black TH 760nm
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$4.6625
5,000+$4.225
50,000+$3.525
100,000+$3.275
- +
Ext. Price(USD):$4,662.50
MOQ:1,000
Mult:1,000
Samtec
Package:SMD,P=1.27mm,Horizontal SMD
ECAD Model:
Socket 1.27mm 6-Pin 3.2A 250nm Gold Black SMD, P=1.27mm, Bracket Mount, SMD
Pre-order
12,500
Factory Lead Time:8-10 weeks
25+$7.2382
50+$6.2731
21,275+$1.8771
46,575+$1.7179
- +
Ext. Price(USD):$253.33
MOQ:35
Mult:1
SPQ:1
Molex
Package:SMD,P=2mm
ECAD Model:
Push-Pull Receptacle 2mm Pitch 44 Pin 1A 760nm Gold Black SMD 44.19mm L × 5.33mm H
Pre-order
1,920,000
Factory Lead Time:22-26 weeks
19,200+$5.4625
40,000+$4.7875
100,000+$4.675
- +
Ext. Price(USD):$104,880.00
MOQ:19,200
Mult:19,200
Available Stock
1,976
Estimated Ship Time:10-15 working days
1+$0.1779
- +
Ext. Price(USD):$50.16
MOQ:282
Mult:1
SPQ:132
Available Stock
790
Estimated Ship Time:14-17 working days
10+$2.3304
30+$1.7591
500+$1.273
1,000+$1.2659
- +
Ext. Price(USD):$51.26
MOQ:22
Mult:1
SPQ:1
Amphenol
ECAD Model:
Push-Pull Receptacle 2mm 2 22-Pin 2A 203nm Gold Black TH
Pre-order
1,500,000
Factory Lead Time:9 weeks
3,000+$1.149
- +
Ext. Price(USD):$3,447.00
MOQ:3,000
Mult:1,500
SPQ:1,500
Molex
ECAD Model:
TH 50.7mm (L) × 7.9mm (H)
Pre-order
24,300
Factory Lead Time:22-26 weeks
243+$1.5125
972+$1.4625
1,000+$1.425
- +
Ext. Price(USD):$367.53
MOQ:243
Mult:243
SPQ:243
Molex
ECAD Model:
Bottom Entry Locking Ramp Receptacle 3.96mm 1-Pos 7-Pin 4.5A 1.52μm Tin TH 11.92mm H
Available Stock
18
Estimated Ship Time:4-6 working days
1+$0.898
- +
Ext. Price(USD):$0.89
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 2 Pos, 10 Pin, 2.5A, Tin Plated, Black, TH, 12.67mm × 5.0546mm × 5.05mm
Pre-order
3,456,000
Factory Lead Time:22-26 weeks
34,560+$4.8625
80,000+$4.2625
200,000+$4.175
- +
Ext. Price(USD):$168,048.00
MOQ:34,560
Mult:34,560
Push-Pull Receptacle, 2mm Pitch, 11-Pin, 2A, 203nm, Gold Plated, Black, SMD
Pre-order
21,840
Factory Lead Time:10-16 weeks
24+
2,184+$1.4587
2,912+$1.4206
- +
Ext. Price(USD):$3,185.80
MOQ:2,184
Mult:728
SPQ:728
Amphenol
ECAD Model:
Push-Pull Receptacle 2.54mm 1-Ch 17-Pin 3A 760nm Gold Blue TH 43.1mm L
Pre-order
14,040
Factory Lead Time:10-16 weeks
24+
1,404+$2.3765
1,638+$2.3146
- +
Ext. Price(USD):$3,336.60
MOQ:1,404
Mult:234
SPQ:234
Amphenol
ECAD Model:
Connector Receptacle Bottom/Top Entry Push-Pull 2.54mm Pitch 2 Pos 32-Pin 3A 760nm Gold Gray SMD 45.64mm L × 5.08mm H
Pre-order
7,680
Factory Lead Time:10-16 weeks
24+
768+$2.0482
960+$1.9948
- +
Ext. Price(USD):$1,573.01
MOQ:768
Mult:192
SPQ:192
Bottom or Top Entry, Push-Pull, Receptacle 2.54mm 2 18-Pin 760nm Gold Black SMD
Pre-order
12,000
Factory Lead Time:10-16 weeks
24+
1,200+$1.1562
1,600+$1.126
- +
Ext. Price(USD):$1,387.44
MOQ:1,200
Mult:400
SPQ:400
25 / PageGoto