Female Socket Headers

Results:

Female socket headers receive male pins to create removable PCB, module and board-to-board connections. Begin with the mating pin’s pitch, cross-section and contact arrangement, then define the acceptable insertion depth, socket height, entry direction and PCB termination needed for a mechanically secure and electrically stable connection.

Build the Mating Pair from the Male Pin

  1. Match the contact layout. Confirm pitch, number of positions, number of rows, row spacing and any intentionally unpopulated positions.
  2. Check the pin envelope. Compare the male pin’s width, thickness, shape and plating with the socket’s accepted contact range.
  3. Calculate contact engagement. The exposed male post must reach the female contact’s working area without exceeding its maximum insertion depth.
  4. Confirm polarization. Shrouds, keys, locating features and pin-one orientation must align across both halves.

Use Male Pin Headers to identify the corresponding exposed-pin connector before approving the female socket.

Check the Contact Engagement Window

Pitch compatibility does not confirm a complete match. The socket contact must grip the specified male pin and maintain enough overlap for the expected current, signal and mechanical conditions.

Drawing Field Required Comparison Mismatch Risk
Accepted pin size Male contact width, thickness and cross-section Loose contact or damaged spring beams
Minimum insertion depth Available male post length after accounting for body height Incomplete engagement or unstable resistance
Maximum insertion depth Post length entering the socket cavity Bottoming out or permanent contact deformation
Contact finish Female and male mating-surface plating Accelerated wear or inconsistent contact performance

Set the Installed Connection Height

Determine the finished assembly height from the female socket body, male header insulator, exposed post and actual mating overlap. For module sockets, confirm that the module seats at the intended height without contacting nearby components. For two-PCB assemblies, verify parallel-board spacing, component clearance and access for separation.

Height check: Female body height + exposed male structure − mating overlap = approximate installed connection height. Use the manufacturer drawings for the final tolerance calculation.

If controlled board spacing, elevated PCBs or pass-through contacts are the primary requirement, compare Board Stacking Connectors.

Select the Entry and PCB Side

Top-entry Choose for perpendicular mating above the PCB; check overhead clearance and extraction space.
Side-entry Choose for board-edge access or low-profile assemblies; confirm lateral keepout space.
Through-hole Match the finished-hole pattern, board thickness and solder-tail length.
Surface-mount Verify the recommended land pattern, coplanarity, locating features and reflow limits.

Unusual contact layouts, non-standard pin lengths or application-specific mating geometry may require Special Pin Headers. For additional guidance on header pitch, rows, mounting styles, pin dimensions and alternative-part evaluation, see the PCB Pin Header Selection Guide.

Record Both Halves in the BOM

Record the male and female part numbers together with pitch, positions, rows, accepted pin size, insertion-depth range, body height, installed height, entry direction, PCB mounting, plating and electrical ratings. Retaining both drawings and the approved mating combination helps prevent replacements that match the footprint but fail at the contact interface.

Read More
Female Socket HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Locking Ramp Receptacle 3.96mm 1 2-Pin 5A 2.54μm Tin Board Mount, Edge Mount, TH 7.82mm L × 11.4mm H
Pre-order
79,000
Factory Lead Time:22-26 weeks
790+$0.185
1,579+$0.1563
3,157+$0.14
5,000+$0.1313
- +
Ext. Price(USD):$146.15
MOQ:790
Mult:790
SPQ:790
Molex
ECAD Model:
Plug, Receptacle, Wire-to-Board 1 2A TH 13.4mm L × 6.55mm H
Pre-order
594,000
Factory Lead Time:22-26 weeks
5,940+$0.3288
12,000+$0.2888
30,000+$0.2825
- +
Ext. Price(USD):$1,953.07
MOQ:5,940
Mult:5,940
Amphenol Communications Solutions 2mm Pitch 4-Pin Header, Minitek Series, Right Angle, Surface Mount
Pre-order
60,480
Factory Lead Time:10-16 weeks
24+
6,048+$0.5468
8,064+$0.5326
- +
Ext. Price(USD):$3,307.04
MOQ:6,048
Mult:2,016
SPQ:2,016
JST
ECAD Model:
Board Connector 15A TH
Available Stock
22
Estimated Ship Time:4-6 working days
26+
1+$5.3075
- +
Ext. Price(USD):$5.30
MOQ:1
Mult:1
SPQ:1
Amphenol
Package:SMD,P=2mm
ECAD Model:
Bottom Entry Push-Pull Receptacle 2mm Pitch 6-Pin 1A Gold Black SMD 5.92mm L × 4mm H
Pre-order
3,750,000
Factory Lead Time:7 weeks
7,500+$0.7817
- +
Ext. Price(USD):$5,862.75
MOQ:7,500
Mult:7,500
SPQ:7,500
Push-Pull Receptacle, 2mm Pitch, 7 Pin, 2A, 380nm, Gold Plated, Black, TH
Pre-order
43,680
Factory Lead Time:10-16 weeks
24+
4,368+$0.8309
5,460+$0.8092
- +
Ext. Price(USD):$3,629.37
MOQ:4,368
Mult:1,092
SPQ:1,092
Socket 2mm 2 8-Pin 4.5A 510nm Gold Black Bracket Mount, TH, 8.3mm L × 4mm H
Pre-order
100
Factory Lead Time:8-10 weeks
25+$6.9969
50+$6.0559
29,225+$1.3753
63,189+$1.2522
- +
Ext. Price(USD):$251.88
MOQ:36
Mult:1
SPQ:1
Receptacle, Bottom/Top Entry, Push-Pull, 2.54mm, 36-Pin, 3A, 2μm Tin, Gray, SMD
Pre-order
4,000
Factory Lead Time:10-16 weeks
24+
400+$2.8547
800+$2.7802
- +
Ext. Price(USD):$1,141.88
MOQ:400
Mult:400
SPQ:400
Push-Pull Receptacle, 2.54mm Pitch, 17-Pin, 2A, 760nm, Gold Plated, Black, TH, 43.18mm L × 3.56mm H
Pre-order
104,000
Factory Lead Time:22-26 weeks
1,040+$2.125
5,005+$1.925
50,011+$1.6
100,009+$1.4875
- +
Ext. Price(USD):$2,210.00
MOQ:1,040
Mult:1,040
Molex
ECAD Model:
1.50mm Pitch Click Mate PCB Receptacle Single Row SMD Tin Plated Positive Lock Pick And Place Polyimide Tape 14 Circuits Blue
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$1
8,000+$0.8625
20,000+$0.85
- +
Ext. Price(USD):$2,700.00
MOQ:2,700
Mult:2,700
Amphenol
ECAD Model:
Push-Pull Receptacle 2.54mm 2-Pos 4-Pin 2A 760nm Gold Gray SMD
Pre-order
41,760
Factory Lead Time:10-16 weeks
24+
4,176+$0.7316
5,568+$0.7126
- +
Ext. Price(USD):$3,055.16
MOQ:4,176
Mult:1,392
SPQ:1,392
Bottom or Top Entry Push-Pull Receptacle 2.54mm 2 48-Pin 3A 760nm Gold Gray SMD 65.96mm L × 6mm H
Pre-order
3,000
Factory Lead Time:10-16 weeks
24+
300+$3.6535
600+$3.5581
- +
Ext. Price(USD):$1,096.05
MOQ:300
Mult:300
SPQ:300
Push-Pull Receptacle 2.54mm 20Pin 3A Gold Gray TH
Pre-order
9,660
Factory Lead Time:10-16 weeks
24+
966+$1.8726
1,288+$1.8237
- +
Ext. Price(USD):$1,808.93
MOQ:966
Mult:322
SPQ:322
XKB Connection
Package:SMD,P=1.27mm(Staggered Pins)
ECAD Model:
Diode 1A SMD P=1.27mm Interleaved Pins
Available Stock
10,000
Estimated Ship Time:7-15 working days
26+
1,000+$0.5088
2,000+$0.4893
3,000+$0.4696
- +
Ext. Price(USD):$508.80
MOQ:1,000
Mult:1,000
SPQ:1,000
Push-Pull Receptacle 2mm Pitch 20Pin 2A 2.54μm Tin Black TH
Pre-order
23,520
Factory Lead Time:10-16 weeks
24+
2,352+$1.7702
3,136+$1.7241
- +
Ext. Price(USD):$4,163.51
MOQ:2,352
Mult:784
SPQ:784
Push-Pull Receptacle 800μm 2-Pos 14-Pin 500mA Tin Black SMD
Available Stock
25
Estimated Ship Time:4-6 working days
1+$1.4837
- +
Ext. Price(USD):$1.48
MOQ:1
Mult:1
SPQ:1
Samtec
Package:SMD,P=2mm
ECAD Model:
Samtec MMS Series Board-to-Board Connector, 2mm Pitch, 8-Pin Dual Row, Right Angle, Surface Mount
Available Stock
50
Estimated Ship Time:4-6 working days
21+
1+$2.4051
- +
Ext. Price(USD):$14.43
MOQ:6
Mult:1
Molex
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 20-Pin, 2A, 760nm, Gold Plated, Black, TH, 25.27mm L × 8.76mm H
Pre-order
1,008,000
Factory Lead Time:22-26 weeks
10,080+$2.9375
30,000+$2.575
75,000+$2.5125
- +
Ext. Price(USD):$29,610.00
MOQ:10,080
Mult:10,080
Push-Pull Receptacle 2.54mm 2-Ch 50-Pin 3A 760nm Gold Gray TH 63.42mm(L) × 5.08mm(H)
Pre-order
4,680
Factory Lead Time:10-16 weeks
24+
468+$2.4865
585+$2.4217
- +
Ext. Price(USD):$1,163.68
MOQ:468
Mult:117
SPQ:117
Available Stock
3,339
Estimated Ship Time:14-17 working days
50+$0.8782
100+$0.7353
2,000+$0.5876
4,000+$0.5853
- +
Ext. Price(USD):$50.05
MOQ:57
Mult:1
SPQ:1
Harwin
ECAD Model:
HARWIN 2mm Pitch 6P Dual Row Receptacle, Right Angle, TH
Available Stock
1,974
Estimated Ship Time:8-14 working days
94+$0.6982
470+$0.6374
3,384+$0.5698
10,434+$0.553
- +
Ext. Price(USD):$196.89
MOQ:282
Mult:94
SPQ:94
XKB Connection
Package:SMD,P=1.27mm(Staggered Pins)
ECAD Model:
Diode 1A SMD P=1.27mm Interleaved Pins
Available Stock
10,000
Estimated Ship Time:7-15 working days
26+
1,000+$0.44
2,000+$0.423
3,000+$0.4061
- +
Ext. Price(USD):$440.00
MOQ:1,000
Mult:1,000
SPQ:1,000
Push-Pull Receptacle 2mm 2 44-Pin 2A 760nm Gold TH
Pre-order
8,580
Factory Lead Time:10-16 weeks
24+
858+$3.875
1,287+$3.7738
- +
Ext. Price(USD):$3,324.75
MOQ:858
Mult:429
SPQ:429
Amphenol
Package:SMD,P=1.27mm
ECAD Model:
Push-Pull Receptacle, 80-Pin, 1.27mm Pitch, 1A, 760nm, Gold Plated, SMD
Pre-order
1,100,000
Factory Lead Time:8 weeks
2,200+$5.7381
- +
Ext. Price(USD):$12,623.82
MOQ:2,200
Mult:440
SPQ:440
Bracket Mount, TH Receptacle, 2.54mm Pitch, 2 Pos, 18-Pin, 2A, 760nm, Gold, Black
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$2.6125
5,000+$2.3625
50,000+$1.975
100,000+$1.8375
- +
Ext. Price(USD):$3,918.75
MOQ:1,500
Mult:1,500
25 / PageGoto