Board-to-Board & Mezzanine Connectors

Results:

Board-to-board and mezzanine connectors create direct electrical connections between two PCBs without a wire harness. This category includes fine-pitch arrays, center-strip, free-height, floating, right-angle and high-speed designs. Define the PCB relationship first, then select a compatible mating pair by pitch, positions, stack height, mounting and electrical performance.

Choose the PCB Relationship

Connector orientation follows the required relationship between the two circuit boards. Establish this geometry before comparing pitch or contact count.

PCB relationship Typical connector arrangement Primary mechanical input
Parallel / mezzanine Vertical plug and receptacle pair Board-to-board distance and component clearance
Perpendicular Vertical connector paired with a right-angle connector PCB edge position and 90-degree alignment
Coplanar Two compatible right-angle connector halves Board-edge gap and in-plane alignment
Edge or array interface Edge-type, center-strip or high-density array design Insertion direction, contact field and board keep-out

If the overall interconnection method is still open, the PCB Connector Selection Guide compares mezzanine, stacking header, card-edge, wire-to-board and other PCB connection paths.

Build the Complete Mated Geometry

A board-to-board interface must be evaluated as a pair. Record both connector part numbers and model the complete assembly rather than using the dimensions of one half.

PCB A footprint + Connector A + Mated interface + Connector B + PCB B footprint
  • Mated stack height: Use the manufacturer-specified combination of both connector halves.
  • Board clearance: Include connector bodies, components, solder joints and keep-out areas.
  • Orientation: Confirm vertical or right-angle construction on both boards.
  • Mechanical support: Coordinate connector height with standoffs, fasteners and the enclosure.
  • Service clearance: Allow access for mating, unmating and inspection without excessive PCB flexure.

Select the Connector Architecture

Architecture Selection focus
Fine-pitch mezzanine Low mated height, compact footprint and high contact density
Free-height system Available mating combinations and their specified stack heights
Floating design Permitted movement, alignment tolerance and fixed versus floating side
High-speed mezzanine Ground structure, differential routing and documented signal performance
Right-angle interface Perpendicular or coplanar PCB placement and board-edge clearance

For conventional pin-header, socket, long-post or pass-through PCB stacking, compare Board Stacking Connectors.

Validate the SMT Assembly Window

Fine-pitch board-to-board connectors require the mechanical drawing, recommended footprint and assembly process to be reviewed together. Check pad geometry, locating features, connector coplanarity, pick-and-place area and reflow compatibility.

The completed assembly must also accommodate PCB manufacturing tolerances, placement accuracy and enclosure alignment. For floating designs, verify the permitted movement from the manufacturer and confirm that the surrounding hardware does not prevent that movement.

Match Electrical Performance to the Layout

  • Allocate signal, power and ground contacts across the interface.
  • Check current and voltage ratings under the stated operating conditions.
  • Verify data rate, differential impedance, crosstalk and insertion-loss documentation where required.
  • Confirm contact plating, operating temperature, vibration and mating-cycle ratings.
  • Review the PCB stack-up, reference planes, escape routing and return paths for high-speed signals.
Fine pitch and high contact density do not by themselves establish high-speed capability. Use performance data for the exact connector series, mated pair and PCB implementation.

Release a Matched-Pair BOM

Record Connector A and Connector B part numbers, PCB relationship, pitch, positions, mated stack height, orientation, footprint revision, electrical limits and required mechanical support. Confirm the manufacturer’s mating table, polarization and keying before releasing either connector for procurement.

If the project needs a different rectangular connection path, return to Rectangular Connectors to compare wire-to-board, panel-mount and other interface families.

Read More
Board-to-Board & Mezzanine ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
UMaxconn
Package:SMD,P=0.8mm
ECAD Model:
mPCI-E Connector, 800μm, 9mm, SMD, P=0.8mm
In Stock361
2508+
1+$0.9569
10+$0.7975
50+$0.6835
100+$0.5981
- +
Ext. Price(USD):$0.95
MOQ:1
Mult:1
SPQ:350
UMaxconn
Package:SMD,P=0.8mm
ECAD Model:
mPCI-E Connector 800μm 4mm SMD P=0.8mm
In Stock650
2621+
1+$0.5889
10+$0.4817
650+$0.3027
1,300+$0.2875
- +
Ext. Price(USD):$0.58
MOQ:1
Mult:1
SPQ:650
UMaxconn
Package:SMD,P=0.5mm
ECAD Model:
M.2 Connector, 500μm Pitch, 3.2mm Width, SMD, P=0.5mm
In Stock900
2551+
1+$0.8947
10+$0.7252
500+$0.4784
900+$0.4517
- +
Ext. Price(USD):$0.89
MOQ:1
Mult:1
SPQ:900
PCI-E Connector, TH, 1mm, 11.25mm
In Stock251
2548+
1+$0.6252
10+$0.4962
60+$0.434
120+$0.3737
- +
Ext. Price(USD):$0.62
MOQ:1
Mult:1
SPQ:60
UMaxconn
Package:SMD,P=1mm
ECAD Model:
PCI-E Connector, SMD, 1mm Pitch, 11.25mm Length
In Stock277
2613+
1+$2.202
10+$1.835
50+$1.5729
100+$1.3763
- +
Ext. Price(USD):$2.20
MOQ:1
Mult:1
SPQ:30
UMaxconn
Package:SMD,P=0.5mm
ECAD Model:
M.2 Connector, 500μm H, 8.5mm W, SMD, P=0.5mm
In Stock555
2611+
1+$1.5105
10+$1.2587
50+$1.0789
100+$0.9441
- +
Ext. Price(USD):$1.51
MOQ:1
Mult:1
SPQ:350
UMaxconn
Package:SMD,P=0.8mm
ECAD Model:
mPCI-E 800μm 9.9mm SMD P=0.8mm
In Stock441
2605+
1+$1.0217
10+$0.846
350+$0.5409
1,050+$0.52
- +
Ext. Price(USD):$1.02
MOQ:1
Mult:1
SPQ:350
UMaxconn
Package:SMD,P=0.5mm
ECAD Model:
M.2 Connector, 500μm Pitch, 3.2mm Width, SMD, P=0.5mm
In Stock1,806
2547+
1+$1.329
10+$1.1448
50+$1.0032
100+$0.8285
- +
Ext. Price(USD):$1.32
MOQ:1
Mult:1
SPQ:900
UMaxconn
Package:SMD,P=1mm
ECAD Model:
PCI-E Connector 1mm Pitch 11.1mm Length SMD P=1mm
In Stock79
2621+
1+$3.2911
10+$2.7908
40+$2.4232
- +
Ext. Price(USD):$3.29
MOQ:1
Mult:1
SPQ:40
PCI-E Connector, TH, 1mm, 11.25mm
In Stock137
2507+
1+$1.0697
10+$0.8829
480+$0.6092
1,000+$0.587
- +
Ext. Price(USD):$1.06
MOQ:1
Mult:1
SPQ:40
UMaxconn
Package:SMD,P=0.5mm
ECAD Model:
M.2 500μm 8.5mm Gold SMD P=0.5mm
In Stock3,282
2611+
1+$1.1103
10+$1.0337
50+$0.9571
100+$0.8882
- +
Ext. Price(USD):$1.11
MOQ:1
Mult:1
SPQ:350
UMaxconn
Package:SMD,P=0.5mm
ECAD Model:
M.2 Connector 500μm 4.2mm Gold Plated SMD P=0.5mm
In Stock574
2527+
1+$0.8826
10+$0.7355
50+$0.6305
100+$0.5517
- +
Ext. Price(USD):$0.88
MOQ:1
Mult:1
SPQ:750
UMaxconn
Package:SMD,P=0.8mm
ECAD Model:
mPCI-E Connector 800μm 5.6mm SMD P=0.8mm
In Stock2,518
2617+
1+$0.5868
10+$0.4955
50+$0.4289
100+$0.3781
500+$0.3543
- +
Ext. Price(USD):$0.58
MOQ:1
Mult:1
SPQ:500
PCI-E Connector, TH, 1mm, 11.25mm
In Stock287
2502+
1+$1.1516
10+$0.9456
30+$0.8373
- +
Ext. Price(USD):$1.15
MOQ:1
Mult:1
SPQ:30
UMaxconn
Package:SMD,P=1mm
ECAD Model:
PCI-E Connector, SMD, 1mm Pitch, 11.25mm Length
In Stock276
2448+
1+$0.968
10+$0.7883
490+$0.4955
980+$0.4684
- +
Ext. Price(USD):$0.96
MOQ:1
Mult:1
SPQ:70
UMaxconn
Package:SMD,P=1mm
ECAD Model:
PCI-E Connector 1mm Pitch 11.1mm Length SMD P=1mm
In Stock152
2517+
1+$3.3924
10+$2.916
30+$2.5211
- +
Ext. Price(USD):$3.39
MOQ:1
Mult:1
SPQ:30
25 / PageGoto