Panel Mount Connectors

Results:

Panel mount connectors create fixed signal or power interfaces on equipment panels, enclosures and external cases. Because this product range also includes selected free-hanging and wire-mount parts, first confirm the listed mounting type. For a true panel-mounted design, compare the cutout, panel thickness, retention method, termination and mating components.

Confirm What Is Actually Mounted

Mounting type describes where the connector is mechanically secured. Use the product attributes and manufacturer drawing to distinguish the available arrangements before comparing electrical ratings.

Arrangement How to identify it Primary design input
Panel mount Secured to a panel or enclosure through a specified cutout Cutout, panel thickness and retention hardware
Free hanging or in-line Remains on the cable instead of being fixed to a panel Cable exit, strain relief and mating retention
Board mount Mechanically secured or soldered to a PCB PCB footprint, orientation and solder termination
Panel and board mount Interfaces with both an enclosure and a PCB Alignment among the panel, connector and PCB

If the required interface is not panel-mounted, compare the wider Rectangular Connectors range. The PCB Connector Selection Guide also explains how a mounting flange and a board lock perform different mechanical roles.

Translate the Enclosure Drawing into Requirements

Begin with the mechanical boundary rather than connector appearance. Record the required panel cutout dimensions, panel thickness and the permitted connector projection on both sides of the enclosure.

  • Mounting position: Determine whether the connector is installed from the front, rear or side of the panel.
  • Panel retention: Match the design to snap-in tabs, mounting flanges, screws, nuts or the specified hardware.
  • Internal clearance: Allow space for contacts, cable routing, a backshell or a PCB behind the panel.
  • External clearance: Reserve enough room to mate, lock and remove the external connector.
  • Cable direction: Check whether a straight or right-angle exit fits the enclosure and minimum cable bend radius.

Define Both Sides of the Panel Interface

Panel side Questions to resolve
Outside the enclosure What cable or equipment will mate, and which plug or receptacle and locking method does it require?
Inside the enclosure Will the connection use crimp wire, IDC, solder terminals or a PCB, and how much routing space is available?

Then match connector type, positions, pitch, row count, contact gender and supported wire size. For products supplied without conductive terminals, select series-compatible parts from Rectangular Connector Contacts. If the insulating shell is ordered separately, compare compatible options under Rectangular Connector Housings.

Separate Panel Retention from Mating Retention

Panel retention keeps the fixed connector attached to the enclosure. Mating retention keeps the two connector halves engaged. Check both independently: a snap-in housing may secure the panel side while a latch, locking ramp, screw coupling or push-pull mechanism retains the mating connector.

Panel mounting alone does not establish a waterproof interface. Use an IP or sealing rating only when the manufacturer specifies it for the complete mated system, including the required gasket, seals, backshell and cable arrangement.

Complete the Mating and Installation Record

  1. Record the manufacturer series and exact panel-mounted part number.
  2. Confirm the specified mating plug or receptacle, polarization and keying.
  3. List separately ordered contacts, seals, backshells, strain relief and mounting hardware.
  4. Verify the termination tooling and assembly sequence.
  5. Retain the manufacturer drawing with the approved panel cutout and installation dimensions.

Finally, check current and voltage ratings, contact resistance, operating temperature, mating cycles, vibration and shielding requirements for the exact configuration. Matching pitch and position count alone does not establish compatibility; confirm the complete mating pair in the manufacturer documentation.

Read More
Panel Mount ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
40-Pin Plug, Detent Lock, 42-46 AWG, 300μm, 100nm Gold, Black, Wire Mount, Free Hanging, TH
In Stock9,959
2634+
1+$0.7574
10+$0.6197
100+$0.568
500+$0.5243
1,000+$0.4869
- +
Ext. Price(USD):$0.75
MOQ:1
Mult:1
SPQ:10,000
Plug Connector 50-Pin Detent Lock 42-46 AWG Wire Mount TH Free Hanging Gold Plated Black 300μm 100nm
In Stock9,780
2550+
1+$0.5143
10+$0.5014
30+$0.4911
100+$0.4819
- +
Ext. Price(USD):$0.51
MOQ:1
Mult:1
SPQ:200
Plug 500μm 1 10-Pin 203nm Gold Black Solder Wire Mount Free Hanging TH 18mm L × 25.5mm H
In Stock314
2510+
1+$3.3948
10+$3.0862
50+$2.8576
100+$2.7215
500+$2.5919
- +
Ext. Price(USD):$3.39
MOQ:1
Mult:1
SPQ:500
30-Pin Plug, 42-46 AWG, Detent Lock, 300μm, 100nm, Gold, Black, Solder, Wire Mount, Free Hanging, TH
In Stock4
2201+
1+$0.3652
10+$0.3579
100+$0.3426
500+$0.3239
1,000+$0.3068
- +
Ext. Price(USD):$0.36
MOQ:1
Mult:1
SPQ:10,000
Plug, 500μm, 36-Pin, 203nm, Gold, Black, Solder, Wire Mount, Free Hanging, TH, 34.1mm L × 35.7mm H
In Stock192
2540+
1+$7.7995
10+$6.0662
100+$4.9633
500+$4.5497
- +
Ext. Price(USD):$7.79
MOQ:1
Mult:1
SPQ:50
Latch Lock Plug, 32-36 AWG, 40-46 AWG, 500μm, 40-Pin, 50nm Gold, Black, Wire Mount, Free Hanging, TH
In Stock890
2613+
1+$0.7213
10+$0.5771
100+$0.5246
500+$0.4809
1,000+$0.444
- +
Ext. Price(USD):$0.72
MOQ:1
Mult:1
SPQ:5,000
Header 1 4-Pin SMD
In Stock296
2548+
1+$2.0322
10+$1.452
100+$1.2701
500+$1.1292
1,000+$1.0161
- +
Ext. Price(USD):$2.03
MOQ:1
Mult:1
SPQ:250
Hirose Mini Power Connector Plug, MQ172 Series, 30V DC 40V AC 3A 4P Cable Mount
In Stock118
2526+
1+$3.2436
10+$2.9487
50+$2.7303
100+$2.528
- +
Ext. Price(USD):$3.24
MOQ:1
Mult:1
SPQ:50
Latch Holder, Plug, 400μm, 40-Pin, Gold Plated, Natural Color, Wire Mount, Free Hanging, TH
In Stock10,000
2527+
1+$0.6403
10+$0.5239
100+$0.4802
500+$0.4433
1,000+$0.4116
- +
Ext. Price(USD):$0.64
MOQ:1
Mult:1
SPQ:5,000
Hirose IDC Connector, HIF3B Series, Receptacle, 20 Pos, 2 Row, 2.54mm Pitch, Wire Mount
In Stock67
2212+
1+$3.8219
10+$3.576
500+$2.6267
1,000+$2.4595
- +
Ext. Price(USD):$3.82
MOQ:1
Mult:1
SPQ:100
Latch Holder, Plug, 42-46 AWG, 400μm, 1 Pos, 25-Pin, Gold, Natural, Solder, Wire Mount, Free Hanging, TH
In Stock4,400
2531+
1+$0.6394
10+$0.5181
500+$0.3458
1,000+$0.3279
- +
Ext. Price(USD):$0.63
MOQ:1
Mult:1
SPQ:5,000
Connector, 32-36 AWG, 40-46 AWG, Latch Lock, Plug, 500μm, 1 Pos, 30-Pin, 50nm Gold, Black, Solder, Wire Mount, Free Hanging, TH
In Stock4,500
2502+
1+$1.2437
10+$1.1803
30+$0.491
- +
Ext. Price(USD):$1.24
MOQ:1
Mult:1
SPQ:5,000
40 AWG Plug 1mm 1 20-Pin Gold Beige IDC Wire Mount Free Hanging TH
In Stock993
22+
10+$1.2726
50+$1.0447
100+$0.9665
- +
Ext. Price(USD):$12.72
MOQ:10
Mult:1
SPQ:100
26-30 Plug, 2.5mm Pitch, 3 Pos, 45 Pin, Silver Plated, Blue, Solder Wire Mount, Free Hanging, TH, 54mm L × 54mm W
Available Stock
100
Estimated Ship Time:5-7 working days
1+$7.5832
- +
Ext. Price(USD):$7.58
MOQ:1
Mult:1
SPQ:20
Hirose Connector Housing, 6 Pos, 2mm Pitch, 2 Rows
Available Stock
2
Estimated Ship Time:4-6 working days
1+$0.3558
- +
Ext. Price(USD):$0.35
MOQ:1
Mult:1
SPQ:1
Receptacle 34-Pin Gold Blue Solder Wire Mount Free Hanging TH 45mm L
Available Stock
89
Estimated Ship Time:14-17 working days
1+$12.6629
5+$10.323
100+$6.738
200+$6.683
- +
Ext. Price(USD):$50.65
MOQ:4
Mult:1
SPQ:1
Plug, 2.5mm, 3 Pos, 20-Pin, Gold, Blue, Solder, Wire Mount, Free Hanging, TH
Available Stock
758
Estimated Ship Time:14-17 working days
5+$7.7008
10+$6.4198
200+$4.4437
300+$4.4261
- +
Ext. Price(USD):$53.90
MOQ:7
Mult:1
SPQ:1
Plug, 3-Pin, Gold/Black Plated, Wire Mount, Free Hanging, TH, 9mm L × 28.3mm H
Available Stock
100
Estimated Ship Time:5-7 working days
26+
1+$2.9166
- +
Ext. Price(USD):$2.91
MOQ:1
Mult:1
SPQ:50
26 AWG Receptacle, 2mm Pitch, 2-Pos, 26-Pin, Tin Plated, Black, IDC, Wire Mount, Free Hanging, TH
Available Stock
450
Estimated Ship Time:14-17 working days
50+$0.7425
100+$0.6562
4,000+$0.4735
10,000+$0.4723
- +
Ext. Price(USD):$50.49
MOQ:68
Mult:1
SPQ:1
Receptacle, 34-Pin, 26-30 AWG, Silver, Blue, Wire Wrap, Wire Mount, Free Hanging, TH, 45mm L × 9.5mm H
Available Stock
127
Estimated Ship Time:14-17 working days
5+$8.8036
10+$6.9748
100+$5.4405
200+$5.3867
- +
Ext. Price(USD):$52.82
MOQ:6
Mult:1
SPQ:1
Plug, 2 Pos, 16-Pin, Silver, Wire Mount, Free Hanging, TH
Available Stock
173
Estimated Ship Time:14-17 working days
10+$4.6731
30+$3.8182
500+$2.8194
1,000+$2.8092
- +
Ext. Price(USD):$51.40
MOQ:11
Mult:1
SPQ:1
28-30 AWG Plug, 500μm, 10-Pin, 203nm, Gold, Black, Solder, Wire Mount, Free Hanging, TH
Available Stock
4
Estimated Ship Time:4-6 working days
1+$2.76
- +
Ext. Price(USD):$2.76
MOQ:1
Mult:1
SPQ:1
Socket 28 AWG 2.54mm 2 Pos 60-Pin 200nm Gold Black IDC Wire Mount Free Hanging TH
Pre-order
400
Factory Lead Time:14-26 weeks
40+$4.4912
- +
Ext. Price(USD):$179.64
MOQ:40
Mult:40
SPQ:40
Plug, 28-Pin, Silver, Solder, Wire Mount, Free Hanging, TH, 40mm L × 10.5mm H
Available Stock
200
Estimated Ship Time:14-17 working days
5+$7.472
10+$6.1924
200+$4.2494
300+$4.2296
- +
Ext. Price(USD):$52.30
MOQ:7
Mult:1
SPQ:1
Plug, 2 Pos, 8-Pin, Gold Plated, Solder, Wire Mount, Free Hanging, TH, 25mm L × 12.2mm H
Available Stock
191
Estimated Ship Time:14-17 working days
10+$4.0895
30+$3.2373
500+$2.338
1,000+$2.3278
- +
Ext. Price(USD):$53.16
MOQ:13
Mult:1
SPQ:1
25 / PageGoto