Panel Mount Connectors

Results:

Panel mount connectors create fixed signal or power interfaces on equipment panels, enclosures and external cases. Because this product range also includes selected free-hanging and wire-mount parts, first confirm the listed mounting type. For a true panel-mounted design, compare the cutout, panel thickness, retention method, termination and mating components.

Confirm What Is Actually Mounted

Mounting type describes where the connector is mechanically secured. Use the product attributes and manufacturer drawing to distinguish the available arrangements before comparing electrical ratings.

Arrangement How to identify it Primary design input
Panel mount Secured to a panel or enclosure through a specified cutout Cutout, panel thickness and retention hardware
Free hanging or in-line Remains on the cable instead of being fixed to a panel Cable exit, strain relief and mating retention
Board mount Mechanically secured or soldered to a PCB PCB footprint, orientation and solder termination
Panel and board mount Interfaces with both an enclosure and a PCB Alignment among the panel, connector and PCB

If the required interface is not panel-mounted, compare the wider Rectangular Connectors range. The PCB Connector Selection Guide also explains how a mounting flange and a board lock perform different mechanical roles.

Translate the Enclosure Drawing into Requirements

Begin with the mechanical boundary rather than connector appearance. Record the required panel cutout dimensions, panel thickness and the permitted connector projection on both sides of the enclosure.

  • Mounting position: Determine whether the connector is installed from the front, rear or side of the panel.
  • Panel retention: Match the design to snap-in tabs, mounting flanges, screws, nuts or the specified hardware.
  • Internal clearance: Allow space for contacts, cable routing, a backshell or a PCB behind the panel.
  • External clearance: Reserve enough room to mate, lock and remove the external connector.
  • Cable direction: Check whether a straight or right-angle exit fits the enclosure and minimum cable bend radius.

Define Both Sides of the Panel Interface

Panel side Questions to resolve
Outside the enclosure What cable or equipment will mate, and which plug or receptacle and locking method does it require?
Inside the enclosure Will the connection use crimp wire, IDC, solder terminals or a PCB, and how much routing space is available?

Then match connector type, positions, pitch, row count, contact gender and supported wire size. For products supplied without conductive terminals, select series-compatible parts from Rectangular Connector Contacts. If the insulating shell is ordered separately, compare compatible options under Rectangular Connector Housings.

Separate Panel Retention from Mating Retention

Panel retention keeps the fixed connector attached to the enclosure. Mating retention keeps the two connector halves engaged. Check both independently: a snap-in housing may secure the panel side while a latch, locking ramp, screw coupling or push-pull mechanism retains the mating connector.

Panel mounting alone does not establish a waterproof interface. Use an IP or sealing rating only when the manufacturer specifies it for the complete mated system, including the required gasket, seals, backshell and cable arrangement.

Complete the Mating and Installation Record

  1. Record the manufacturer series and exact panel-mounted part number.
  2. Confirm the specified mating plug or receptacle, polarization and keying.
  3. List separately ordered contacts, seals, backshells, strain relief and mounting hardware.
  4. Verify the termination tooling and assembly sequence.
  5. Retain the manufacturer drawing with the approved panel cutout and installation dimensions.

Finally, check current and voltage ratings, contact resistance, operating temperature, mating cycles, vibration and shielding requirements for the exact configuration. Matching pitch and position count alone does not establish compatibility; confirm the complete mating pair in the manufacturer documentation.

Read More
Panel Mount ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
22 AWG Socket, Rectangular Connector, Free Hanging, Panel Mount, 3.96mm, 7 Pin, Tin, Red, IDC Bracket Mount, Free Hanging, Panel Mount
Available Stock
500
Estimated Ship Time:9-14 working days
10+$1.337
25+$1.2528
250+$1.0646
500+$1.0138
- +
Ext. Price(USD):$26.74
MOQ:20
Mult:1
SPQ:1
20AWG Socket, Rectangular Connector, Free Hanging, Panel Mount, 3.96mm Pitch, 3 Pos, Tin Plated, Yellow, IDC Bracket Mount
Available Stock
545
Estimated Ship Time:5-12 working days
100+$0.3108
500+$0.2841
15,000+$0.2249
25,000+$0.2212
- +
Ext. Price(USD):$31.08
MOQ:100
Mult:1
SPQ:1,000
22 AWG Socket, Rectangular Connector, Free Hanging, Panel Mount, 3.96mm, 6-Pin, Tin Plated, Red, IDC, Bracket Mount
Available Stock
477
Estimated Ship Time:9-14 working days
10+$1.2485
25+$1.1694
50+$1.1137
100+$1.0605
250+$0.9939
- +
Ext. Price(USD):$26.21
MOQ:21
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket, 2mm Pitch, 2-Pos, 16-Pin, Gold Plated, Black, IDC, Wire Mount, Free Hanging, TH, 21.2mm L × 4.2mm H
Available Stock
333
Estimated Ship Time:9-14 working days
10+$1.4796
25+$1.3872
50+$1.3208
120+$1.2416
- +
Ext. Price(USD):$26.63
MOQ:18
Mult:1
SPQ:1
Locking Ramp Receptacle 3.96mm 3-Pin Tin Red IDC Wire Mount Free Hanging TH
Available Stock
557
Estimated Ship Time:9-14 working days
25+$0.7059
50+$0.6724
100+$0.6401
250+$0.6
500+$0.5713
- +
Ext. Price(USD):$26.11
MOQ:37
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket 2.54mm 2 6-Pin Gold Black IDC Wire Mount Free Hanging TH 13.5mm H
Available Stock
5,995
Estimated Ship Time:9-14 working days
50+$0.3797
240+$0.3398
1,200+$0.3033
2,640+$0.2869
- +
Ext. Price(USD):$26.19
MOQ:69
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket 2mm 2-Pos 14-Pin Gold Black IDC Wire Mount Free Hanging TH 19.2mm L × 4.2mm H
Available Stock
480
Estimated Ship Time:9-14 working days
25+$0.9534
50+$0.9078
1,120+$0.7289
2,520+$0.6884
- +
Ext. Price(USD):$26.69
MOQ:28
Mult:1
SPQ:1
18 AWG Locking Ramp Receptacle 3.96mm 1 3Pin Tin Orange IDC Wire Mount Free Hanging TH
Available Stock
490
Estimated Ship Time:9-14 working days
25+$0.7059
50+$0.6724
100+$0.6401
250+$0.6
- +
Ext. Price(USD):$26.11
MOQ:37
Mult:1
SPQ:1
22 AWG Receptacle, Rectangular Connector, Free Hanging, Panel Mount, 3.96mm, 5-Pin, Tin, Red, IDC, Bracket Mount
Available Stock
1,003
Estimated Ship Time:9-14 working days
10+$1.1545
25+$1.0817
500+$0.8752
1,000+$0.8335
- +
Ext. Price(USD):$26.55
MOQ:23
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket, 2mm Pitch, 20 Pos, Gold Plated, Black, IDC, Wire Mount, Free Hanging, TH
Available Stock
394
Estimated Ship Time:6-13 working days
10+$1.426
25+$1.309
1,080+$0.7938
2,592+$0.77
- +
Ext. Price(USD):$14.26
MOQ:10
Mult:1
SPQ:1
20 AWG Locking Ramp Receptacle 3.96mm 1-2Pin Tin Yellow IDC Wire Mount, Free Hanging, TH
Available Stock
1,176
Estimated Ship Time:9-14 working days
25+$0.5625
50+$0.5355
500+$0.4551
1,000+$0.4333
- +
Ext. Price(USD):$26.43
MOQ:47
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket, 2.54mm, 2 Pos, 64-Pin, Gold, Black, IDC Wire Mount, Free Hanging, TH, 88.52mm L × 10.4mm H
Available Stock
939
Estimated Ship Time:9-14 working days
10+$1.7809
36+$1.6263
1,008+$1.2853
2,520+$1.2049
- +
Ext. Price(USD):$26.71
MOQ:15
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket, 2.54mm Pitch, 20 Pin, Gold Plated, Black, IDC, Wire Mount, Free Hanging, TH, 29.97mm L × 13.5mm H
Available Stock
2,178
Estimated Ship Time:6-13 working days
25+$0.4106
108+$0.3718
5,076+$0.256
10,044+$0.2419
- +
Ext. Price(USD):$14.37
MOQ:35
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket 2.54mm 34-Pin 30μin Gold Black IDC Wire Mount Free Hanging TH
Available Stock
640
Estimated Ship Time:6-13 working days
10+$0.7498
25+$0.6613
5,040+$0.4352
10,020+$0.4331
- +
Ext. Price(USD):$14.24
MOQ:19
Mult:1
SPQ:1
68PIN, 1.27 IDC SMC FEMALE CABLE
Available Stock
174
Estimated Ship Time:9-14 working days
1+$11.2536
10+$9.5666
576+$7.1869
1,152+$6.8443
- +
Ext. Price(USD):$33.76
MOQ:3
Mult:1
SPQ:1
24 AWG Locking Receptacle, 2.54mm Pitch, 8-Pin, Tin, White, IDC, Wire Mount, Free Hanging, TH
Available Stock
9,998
Estimated Ship Time:7-9 working days
19+
176+$0.627
1,000+$0.627
4,000+$0.572
- +
Ext. Price(USD):$110.35
MOQ:176
Mult:1
SPQ:1
18AWG Socket, Rectangular Connector, Free Hanging, Panel Mount, 3.96mm, 4-Pin, Tin, Orange, IDC Bracket Mount, Free Hanging, Panel Mount
Available Stock
457
Estimated Ship Time:9-14 working days
25+$0.912
50+$0.8685
1,000+$0.7029
3,000+$0.6505
- +
Ext. Price(USD):$26.44
MOQ:29
Mult:1
SPQ:1
40PIN, 1.27 IDC SMC FEMALE CABLE
Available Stock
371
Estimated Ship Time:9-14 working days
1+$7.7112
10+$6.5545
100+$5.5712
288+$5.2842
- +
Ext. Price(USD):$30.84
MOQ:4
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket, 2.54mm, 10-Pin, Gold, Black, IDC, Wire Mount, Free Hanging, TH, 13.5mm H
Available Stock
5,945
Estimated Ship Time:6-13 working days
25+$0.3542
100+$0.3102
2,520+$0.2516
10,080+$0.2506
- +
Ext. Price(USD):$14.16
MOQ:40
Mult:1
SPQ:1
22 AWG Locking Ramp Receptacle, 3.96mm Pitch, 4-Pin, Tin Plated, Red, IDC, Wire Mount, Free Hanging, TH
Available Stock
496
Estimated Ship Time:9-14 working days
25+$0.8359
50+$0.796
1,000+$0.6441
3,000+$0.5961
- +
Ext. Price(USD):$26.74
MOQ:32
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket, 2mm Pitch, 2 Rows, 30 Pin, Gold Plated, Black, IDC, Wire Mount, Free Hanging, TH
Available Stock
896
Estimated Ship Time:9-14 working days
10+$1.8241
25+$1.7094
1,008+$1.3168
2,520+$1.2344
- +
Ext. Price(USD):$27.36
MOQ:15
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Push-Pull Socket 2.54mm 2 14pin Gold Black IDC Wire Mount Free Hanging TH 22.35mm L
Available Stock
1,010
Estimated Ship Time:6-13 working days
25+$0.3864
100+$0.3432
5,040+$0.2495
10,080+$0.2354
- +
Ext. Price(USD):$14.29
MOQ:37
Mult:1
SPQ:1
25 / PageGoto