Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 52 POS 2.54mm Solder ST Thru-Hole C-Grid® Tube
Pre-order
42,000
Factory Lead Time:22-26 weeks
420+$6.3875
840+$6.2625
1,000+$5.225
2,500+$4.55
5,000+$4.225
- +
Ext. Price(USD):$2,682.75
MOQ:420
Mult:420
SPQ:420
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.8965
- +
Ext. Price(USD):$1,613.70
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.8618
- +
Ext. Price(USD):$1,034.16
MOQ:1,200
Mult:1,200
SPQ:400
Lumberg
ECAD Model:
Shrouded Header (2 Sides) HDR 5 POS 5mm Solder ST Thru-Hole Box
Pre-order
200,000
Factory Lead Time:8-10 weeks
2,000+$0.7479
- +
Ext. Price(USD):$1,495.80
MOQ:2,000
Mult:200
SPQ:200
Molex
ECAD Model:
Pre-order
44,600
Factory Lead Time:22-26 weeks
446+$1.025
1,782+$0.95
- +
Ext. Price(USD):$457.15
MOQ:446
Mult:446
SPQ:446
Conn Shrouded Header (4 Sides) HDR 100 POS 2mm Solder ST Thru-Hole
Available Stock
60
Estimated Ship Time:4-6 working days
20+
1+$18.4136
- +
Ext. Price(USD):$18.41
MOQ:1
Mult:1
Conn Unshrouded Header HDR 4 POS 2.54mm Solder ST Thru-Hole Automotive Tray
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.4
50,000+$0.3325
100,000+$0.2875
250,000+$0.265
- +
Ext. Price(USD):$4,000.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.405
- +
Ext. Price(USD):$1,264.50
MOQ:900
Mult:900
SPQ:300
Available Stock
118
Estimated Ship Time:7-12 working days
1+$40.2329
10+$32.2258
25+$29.0626
100+$26.9867
- +
Ext. Price(USD):$241.39
MOQ:6
Mult:1
SPQ:1
Wire-to-Board Connector HDR, 10 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$0.7869
- +
Ext. Price(USD):$1,203.95
MOQ:1,530
Mult:1,530
SPQ:510
Through Hole Type Shrouded Header
Available Stock
867
Estimated Ship Time:14-17 working days
500+$0.0795
1,000+$0.066
10,000+$0.0538
30,000+$0.0538
- +
Ext. Price(USD):$50.00
MOQ:629
Mult:1
SPQ:1
Connectors 1.25mm Pitch Disconnectable Crimp Style
Available Stock
50
Estimated Ship Time:4-6 working days
26+
1+$1.2396
- +
Ext. Price(USD):$1.23
MOQ:1
Mult:1
SPQ:1
Molex
Package:SMD,P=1.5mm,Horizontal SMD
ECAD Model:
1.50mm Pitch CLIK Mate Wire-to-Board Receptacle, Dual Row, SMD, Right Angle, 24 Circuits, Gold Plated, Natural
Pre-order
165,000
Factory Lead Time:22-26 weeks
1,650+$6.25
4,400+$5.4875
10,450+$5.3625
- +
Ext. Price(USD):$10,312.50
MOQ:1,650
Mult:1,650
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.572
- +
Ext. Price(USD):$5,914.80
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.5216
- +
Ext. Price(USD):$2,054.16
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0132
- +
Ext. Price(USD):$1,215.84
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Header EH 2.5 THT Top Entry
Available Stock
14,800
Estimated Ship Time:6-7 working days
23+
20+$0.0804
1,000+$0.0279
- +
Ext. Price(USD):$1.60
MOQ:20
Mult:20
Minitek 1.80mm WTB Connector, USCAR 2 V2 Compatible, Right Angle TH, 28-Pin Header C Coding
Pre-order
600,000
Factory Lead Time:10 weeks
1,200+$2.1152
- +
Ext. Price(USD):$2,538.24
MOQ:1,200
Mult:600
SPQ:600
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$0.4805
- +
Ext. Price(USD):$1,383.84
MOQ:2,880
Mult:2,880
SPQ:960
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
1,147,500
Factory Lead Time:15 weeks
2,295+$2.93
- +
Ext. Price(USD):$6,724.35
MOQ:2,295
Mult:2,295
SPQ:765
Disconnectable Insulation Displacement Connectors, 1.27mm Pitch, Ribbon Cables
Available Stock
172
Estimated Ship Time:6-7 working days
20+$1.3346
- +
Ext. Price(USD):$26.69
MOQ:20
Mult:20
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.7608
- +
Ext. Price(USD):$912.96
MOQ:1,200
Mult:1,200
SPQ:400
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$2.0752
- +
Ext. Price(USD):$3,361.82
MOQ:1,620
Mult:1,620
SPQ:1,620
Pre-order
144,000
Factory Lead Time:22-26 weeks
1,440+$5.1
5,004+$4.7625
10,008+$4.475
- +
Ext. Price(USD):$7,344.00
MOQ:1,440
Mult:1,440
SPQ:1,440
Available Stock
152
Estimated Ship Time:14-17 working days
100+$0.3937
500+$0.3823
1,000+$0.3599
2,000+$0.3416
4,000+$0.3393
- +
Ext. Price(USD):$50.39
MOQ:128
Mult:1
SPQ:1
25 / PageGoto