Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Shrouded Header (4 Sides), HDR 4 Pos, 2mm Pitch, Solder, ST, Thru-Hole, Tube
Pre-order
66,000
Factory Lead Time:22-26 weeks
660+$2.525
1,320+$2.3875
- +
Ext. Price(USD):$1,666.50
MOQ:660
Mult:660
SPQ:660
JST JFA J2000 Series 2.5mm Pitch 4-Pin Header Right Angle
Available Stock
238
Estimated Ship Time:14-17 working days
10+$4.0182
30+$3.4524
200+$2.8609
300+$2.8487
- +
Ext. Price(USD):$52.23
MOQ:13
Mult:1
SPQ:1
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Header Single Row Right Angle Through Hole
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.4658
- +
Ext. Price(USD):$7,475.58
MOQ:5,100
Mult:5,100
SPQ:1,700
multicomp
ECAD Model:
TERMINAL BLOCK, HEADER, 10POS, TH; Gender:Header; Pitch Spacing:5.08mm; No. of Positions:10Ways; Rated Current:16A; Rated Voltage:300V; Block Orientation:Through Hole Vertical; Product Range:-; SVHC:No SVHC (15-Jan-2019)
Available Stock
145
Estimated Ship Time:6-12 working days
10+$1.5641
25+$1.4015
1,000+$1.3514
1,500+$1.3514
- +
Ext. Price(USD):$25.02
MOQ:16
Mult:1
JST
ECAD Model:
Shrouded Header, HDR, 4 Pos, 2mm, Solder, ST, SMD, T/R
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.1548
18,000+$0.1522
30,000+$0.1484
- +
Ext. Price(USD):$928.80
MOQ:6,000
Mult:6,000
SPQ:6,000
JST
ECAD Model:
IDC Connector RCP 13 POS 2.5mm IDT RA Cable Mount Box
Available Stock
6,054
Estimated Ship Time:4-6 working days
20+
1+$0.453
- +
Ext. Price(USD):$0.45
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.2256
- +
Ext. Price(USD):$1,470.72
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Wire-to-Board Connector HDR 10 Pos 2mm Solder ST Top Entry SMD T/R
Pre-order
42,800
Factory Lead Time:22-26 weeks
428+$0.6625
855+$0.5625
1,710+$0.475
2,500+$0.4625
- +
Ext. Price(USD):$283.55
MOQ:428
Mult:428
SPQ:428
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.2786
- +
Ext. Price(USD):$835.80
MOQ:3,000
Mult:1,500
SPQ:500
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.7778
- +
Ext. Price(USD):$7,900.02
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Conn Board to Board HDR 3 POS 2.5mm
Available Stock
4,750
Estimated Ship Time:4-6 working days
250+$0.1088
- +
Ext. Price(USD):$27.20
MOQ:250
Mult:250
SPQ:250
Molex
ECAD Model:
Wire-to-Board Connector Receptacle 14 POS 1.5mm Solder ST Top Entry SMD CLIK-Mate T/R
Pre-order
540,000
Factory Lead Time:22-26 weeks
5,400+$0.825
12,600+$0.7125
30,600+$0.7
- +
Ext. Price(USD):$4,455.00
MOQ:5,400
Mult:5,400
Conn Unshrouded Header HDR 26 POS 2.54mm Solder ST Thru-Hole Carton
Pre-order
240,000
Factory Lead Time:22-26 weeks
2,400+$3.6125
5,000+$2.6625
10,000+$2.05
50,000+$1.725
100,000+$1.4875
- +
Ext. Price(USD):$8,670.00
MOQ:2,400
Mult:2,400
SPQ:2,400
JST
ECAD Model:
Shrouded Header (4 Sides), HDR 3 Pos, 2mm, Solder, ST, Top Entry, Thru-Hole, Box
Pre-order
240,000
Factory Lead Time:16-18 weeks
24,000+$0.204
- +
Ext. Price(USD):$4,896.00
MOQ:24,000
Mult:24,000
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$0.9018
- +
Ext. Price(USD):$1,704.40
MOQ:1,890
Mult:1,890
SPQ:630
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.7225
- +
Ext. Price(USD):$1,950.75
MOQ:2,700
Mult:2,700
SPQ:900
Shrouded Header 18 Pos 4.68mm Solder Right Angle Side Entry Thru-Hole
Available Stock
78
Estimated Ship Time:6-12 working days
1+$24.1808
10+$23.749
250+$23.3172
500+$23.3172
- +
Ext. Price(USD):$24.18
MOQ:1
Mult:1
Molex
ECAD Model:
Shrouded Header HDR 9-Pin 1.5mm Solder ST Top Entry SMD CLIK-Mate T/R
Pre-order
360,000
Factory Lead Time:22-26 weeks
3,600+$2.5875
8,100+$2.2625
20,700+$2.2125
- +
Ext. Price(USD):$9,315.00
MOQ:3,600
Mult:3,600
Molex
ECAD Model:
Wire-to-Board HDR 14 Pos 1.25mm Solder ST Top Entry SMD T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.925
8,000+$0.8125
20,000+$0.8
- +
Ext. Price(USD):$2,775.00
MOQ:3,000
Mult:3,000
Pre-order
1,600,000
Factory Lead Time:6 weeks
3,200+$1.1873
- +
Ext. Price(USD):$3,799.36
MOQ:3,200
Mult:3,200
SPQ:3,200
Molex
ECAD Model:
C Grid Hdr DRDW w/spacer .38AuLF 22Ckt
Pre-order
216,000
Factory Lead Time:22-26 weeks
2,160+$3.3625
- +
Ext. Price(USD):$7,263.00
MOQ:2,160
Mult:2,160
SPQ:2,160
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9888
- +
Ext. Price(USD):$1,334.88
MOQ:1,350
Mult:1,350
SPQ:450
Assembly, Tab Header 6.35 Series, 2 Pos
Pre-order
240,000
Factory Lead Time:25-42 weeks
2,400+$0.3268
- +
Ext. Price(USD):$784.32
MOQ:2,400
Mult:2,400
SPQ:2,400
Molex
ECAD Model:
Pre-order
3,840,000
Factory Lead Time:22-26 weeks
38,400+$3.1
80,000+$2.7
200,000+$2.65
- +
Ext. Price(USD):$119,040.00
MOQ:38,400
Mult:38,400
Conn Unshrouded Header HDR 16 POS 2.54mm Solder RA Thru-Hole
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$4.95
1,000+$4.6875
2,500+$4.3625
5,000+$4.1625
10,000+$4.025
- +
Ext. Price(USD):$2,475.00
MOQ:500
Mult:500
SPQ:500
25 / PageGoto