Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Conn Wire to Board HDR 2 POS 5mm Solder ST Thru-Hole Box
Available Stock
10
Estimated Ship Time:4-6 working days
1+$0.0988
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7138
- +
Ext. Price(USD):$1,070.70
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Conn Wire to Board SKT 25 POS 1mm IDT ST Cable Mount Box
Available Stock
1,925
Estimated Ship Time:6-7 working days
20+$0.7973
- +
Ext. Price(USD):$15.94
MOQ:20
Mult:20
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.0317
- +
Ext. Price(USD):$3,047.55
MOQ:1,500
Mult:500
SPQ:500
JST
Package:SMD,P=2mm
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 2mm Solder RA Side Entry SMD T/R
Available Stock
2,136
Estimated Ship Time:6-7 working days
23+
20+$1.3903
1,000+$0.482
- +
Ext. Price(USD):$27.80
MOQ:20
Mult:20
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7869
- +
Ext. Price(USD):$1,416.42
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Conn IDC Connector F 5 POS 2mm Solder ST Thru-Hole Automotive Box
Available Stock
1,000
Estimated Ship Time:4-6 working days
1,000+$0.301
- +
Ext. Price(USD):$301.00
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.7225
- +
Ext. Price(USD):$1,950.75
MOQ:2,700
Mult:2,700
SPQ:900
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.773
- +
Ext. Price(USD):$1,159.50
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Shrouded Header Connector, HDR 10 Pos, 2mm Pitch, Solder, ST, Thru-Hole, Tube
Pre-order
18,000
Factory Lead Time:22-26 weeks
180+$2.8625
720+$2.7
- +
Ext. Price(USD):$515.25
MOQ:180
Mult:180
SPQ:180
JST
ECAD Model:
Unshrouded Header HDR 3 Pos 2.5mm Solder RA Thru-Hole
Available Stock
1,000
Estimated Ship Time:6-7 working days
21+
1,000+$0.1334
- +
Ext. Price(USD):$133.40
MOQ:1,000
Mult:1,000
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 4 POS 2mm Solder RA Side Entry Thru-Hole Box
Available Stock
2,000
Estimated Ship Time:4-6 working days
500+$0.0328
- +
Ext. Price(USD):$16.40
MOQ:500
Mult:500
SPQ:500
Molex
ECAD Model:
Wire-to-Board Connector RCP 16 Pos 2.54mm Solder RA Thru-Hole EXTreme LPHPower Tray
Pre-order
207,000
Factory Lead Time:22-26 weeks
2,070+$3.2625
8,000+$2.8625
20,000+$2.8
- +
Ext. Price(USD):$6,753.37
MOQ:2,070
Mult:2,070
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$1.3614
- +
Ext. Price(USD):$3,920.83
MOQ:2,880
Mult:2,880
SPQ:960
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3179
- +
Ext. Price(USD):$1,186.11
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8112
- +
Ext. Price(USD):$1,095.12
MOQ:1,350
Mult:1,350
SPQ:450
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Vertical SMT Tails Hold Down 15 Gold Plated Natural Color 8 Pos Non-Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:13 weeks
6,000+$1.7966
- +
Ext. Price(USD):$10,779.60
MOQ:6,000
Mult:6,000
SPQ:1,200
Molex
ECAD Model:
Pre-order
37,500
Factory Lead Time:22-26 weeks
375+$0.45
1,500+$0.425
- +
Ext. Price(USD):$168.75
MOQ:375
Mult:375
SPQ:375
multicomp
ECAD Model:
Conn IDC Connector HDR 10 POS 2.54mm IDT ST Cable Mount
Available Stock
554
Estimated Ship Time:6-12 working days
10+$1.5365
50+$1.434
100+$1.434
200+$1.434
- +
Ext. Price(USD):$24.58
MOQ:16
Mult:1
Molex
ECAD Model:
Conn Socket Strip RCP 34 POS 2mm Solder ST Top Entry SMD Milli-Grid Tube
Pre-order
37,500
Factory Lead Time:22-26 weeks
375+$1.5
750+$1.3875
1,500+$1.3125
2,500+$1.1375
5,000+$1.0625
- +
Ext. Price(USD):$562.50
MOQ:375
Mult:375
SPQ:375
Molex
ECAD Model:
IDC Connector Receptacle, 7-Pos, 2.5mm Pitch, IDT, Right Angle, Cable Mount, Tray
Pre-order
1,200,000
Factory Lead Time:22-26 weeks
12,000+$0.09
30,000+$0.0788
75,000+$0.0763
- +
Ext. Price(USD):$1,080.00
MOQ:12,000
Mult:12,000
Conn Wire to Board HDR 4 POS 3.96mm Solder ST Top Entry Thru-Hole
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$2.725
1,000+$2.575
- +
Ext. Price(USD):$1,362.50
MOQ:500
Mult:500
SPQ:500
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7242
- +
Ext. Price(USD):$1,086.30
MOQ:1,500
Mult:500
SPQ:500
Molex
ECAD Model:
Wire-to-Board Connector Header 10 Pos 5.08mm Solder Straight Thru-Hole
Pre-order
26,300
Factory Lead Time:22-26 weeks
263+$0.575
1,050+$0.5375
- +
Ext. Price(USD):$151.22
MOQ:263
Mult:263
SPQ:263
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.0063
- +
Ext. Price(USD):$1,358.50
MOQ:1,350
Mult:1,350
SPQ:450
25 / PageGoto