Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 14 POS 2mm Solder RA Side Entry Thru-Hole Tube
Pre-order
460,800
Factory Lead Time:22-26 weeks
4,608+$1.3
- +
Ext. Price(USD):$5,990.40
MOQ:4,608
Mult:4,608
SPQ:4,608
Pre-order
3,000,000
Factory Lead Time:13 weeks
6,000+$1.1142
- +
Ext. Price(USD):$6,685.20
MOQ:6,000
Mult:6,000
SPQ:1,200
Pre-order
210,000
Factory Lead Time:15 weeks
420+$1.0324
- +
Ext. Price(USD):$867.21
MOQ:840
Mult:420
SPQ:420
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.5988
- +
Ext. Price(USD):$898.20
MOQ:1,500
Mult:1,500
SPQ:500
Conn Wire to Wire HDR 14 POS 1.5mm ST Cable Mount Box
Available Stock
155
Estimated Ship Time:6-7 working days
20+$0.484
- +
Ext. Price(USD):$9.68
MOQ:20
Mult:20
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Header, Dual Row, Right Angle, SMT
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$1.4241
- +
Ext. Price(USD):$4,272.30
MOQ:3,000
Mult:3,000
SPQ:600
Conn Unshrouded Header HDR 16 POS 2.54mm Solder ST Thru-Hole Carton
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$1.85
10,000+$1.425
50,000+$1.1875
100,000+$1.0375
250,000+$0.95
- +
Ext. Price(USD):$9,250.00
MOQ:5,000
Mult:5,000
SPQ:5,000
Molex
ECAD Model:
Wire-to-Board HDR 16 Pos 2mm Solder ST Top Entry SMD T/R
Pre-order
57,000
Factory Lead Time:22-26 weeks
570+$1.05
1,140+$0.8875
2,280+$0.7625
2,500+$0.7375
- +
Ext. Price(USD):$598.50
MOQ:570
Mult:570
SPQ:570
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.9916
- +
Ext. Price(USD):$2,688.66
MOQ:1,350
Mult:1,350
SPQ:450
Through Hole Type Shrouded Header
Available Stock
1,000
Estimated Ship Time:14-17 working days
50+$0.5905
100+$0.5069
4,000+$0.3503
5,000+$0.3503
- +
Ext. Price(USD):$50.19
MOQ:85
Mult:1
SPQ:1
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.5128
- +
Ext. Price(USD):$2,269.20
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.9781
- +
Ext. Price(USD):$5,370.43
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
1,250,000
Factory Lead Time:10 weeks
2,500+$2.9212
- +
Ext. Price(USD):$7,303.00
MOQ:2,500
Mult:2,500
SPQ:2,500
JST
ECAD Model:
Conn Board to Board PL 50 POS 0.5mm Solder ST Top Entry SMD T/R
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$1.6007
18,000+$1.574
30,000+$1.534
- +
Ext. Price(USD):$9,604.20
MOQ:6,000
Mult:6,000
SPQ:6,000
JST
ECAD Model:
Shrouded Header (4 Sides), HDR 7 Pos, 2mm Pitch, Solder, ST Top Entry, Thru-Hole, Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.0665
36,000+$0.0653
60,000+$0.0636
- +
Ext. Price(USD):$798.00
MOQ:12,000
Mult:12,000
SPQ:12,000
Molex
ECAD Model:
Pre-order
334,400
Factory Lead Time:22-26 weeks
3,344+$1.2
8,000+$1.0625
20,000+$1.0375
- +
Ext. Price(USD):$4,012.80
MOQ:3,344
Mult:3,344
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4665
- +
Ext. Price(USD):$699.75
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Connector HDR 22 POS 3mm Solder ST Top Entry TH
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.9742
- +
Ext. Price(USD):$2,665.17
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 16 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$1.425
- +
Ext. Price(USD):$7,182.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Molex
ECAD Model:
Conn Unshrouded Header HDR 7 POS 2.54mm Solder ST Top Entry Thru-Hole C-Grid III Tray
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$0.6625
2,400+$0.625
- +
Ext. Price(USD):$397.50
MOQ:600
Mult:600
SPQ:600
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.9651
- +
Ext. Price(USD):$5,958.12
MOQ:1,200
Mult:1,200
SPQ:400
PIN HEADER, 36POS, 1ROW, 2.54MM, THT;
Available Stock
45
Estimated Ship Time:6-12 working days
1+$8.3459
10+$7.6504
500+$7.5113
1,000+$7.5113
- +
Ext. Price(USD):$25.03
MOQ:3
Mult:1
JST
ECAD Model:
IDC Connector RCP 8 POS 2.5mm IDT RA Cable Mount Box
Available Stock
5,000
Estimated Ship Time:4-6 working days
500+$0.4318
- +
Ext. Price(USD):$215.90
MOQ:500
Mult:500
SPQ:500
Conn Shrouded Header (4 Sides) HDR 11 POS 1.5mm Solder ST Top Entry SMD
Available Stock
1,020
Estimated Ship Time:6-7 working days
23+
20+$1.0158
1,000+$0.4039
- +
Ext. Price(USD):$20.31
MOQ:20
Mult:20
Conn Ejector Header HDR 8 POS 2.54mm Solder ST Thru-Hole
Available Stock
586
Estimated Ship Time:6-12 working days
10+$0.685
50+$0.685
500+$0.6028
1,500+$0.6028
- +
Ext. Price(USD):$27.40
MOQ:40
Mult:10
25 / PageGoto