Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
5,000
Estimated Ship Time:14-17 working days
300+$0.1192
500+$0.1069
10,000+$0.0746
30,000+$0.0735
- +
Ext. Price(USD):$50.06
MOQ:420
Mult:1
SPQ:1
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.9625
6,000+$1.7375
501,000+$0.9375
1,002,000+$0.8875
- +
Ext. Price(USD):$5,887.50
MOQ:3,000
Mult:3,000
Shrouded Header (4 Sides), HDR 3 Pos, 2mm, Solder, ST, Top Entry, Thru-Hole, Box
Available Stock
934
Estimated Ship Time:6-7 working days
20+$0.1804
- +
Ext. Price(USD):$3.60
MOQ:20
Mult:20
JST
ECAD Model:
Conn Board-to-Board RCP 40 POS 0.5mm Solder ST Top Entry SMD T/R
Pre-order
150,000
Factory Lead Time:18-22 weeks
26+
15,000+$0.4981
45,000+$0.4898
75,000+$0.4773
- +
Ext. Price(USD):$7,471.50
MOQ:15,000
Mult:15,000
SPQ:15,000
Minitek Power Header, 5.7mm Pitch
Pre-order
1,248,000
Factory Lead Time:15 weeks
2,496+$4.0216
- +
Ext. Price(USD):$10,037.91
MOQ:2,496
Mult:2,496
SPQ:1,248
Wire-to-Board HDR, 14 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, Tray
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$5.5936
- +
Ext. Price(USD):$8,306.49
MOQ:1,485
Mult:1,485
SPQ:495
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.305
- +
Ext. Price(USD):$3,457.50
MOQ:1,500
Mult:1,500
SPQ:500
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.5449
- +
Ext. Price(USD):$1,307.76
MOQ:2,400
Mult:2,400
SPQ:1,200
Amphenol
Package:SMD,P=2.54mm,Horizontal SMD
ECAD Model:
Pre-order
13,200
Factory Lead Time:10-16 weeks
24+
1,320+$3.8367
1,980+$3.7366
- +
Ext. Price(USD):$5,064.44
MOQ:1,320
Mult:660
SPQ:660
Conn Shrouded Header HDR 7 POS 2.54mm Solder ST Thru-Hole Package
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$2.4875
5,000+$2.25
10,000+$2.0625
25,000+$1.9125
50,000+$1.8125
- +
Ext. Price(USD):$7,462.50
MOQ:3,000
Mult:3,000
SPQ:3,000
Conn Shrouded Header HDR 15 POS 1.5mm Solder ST Thru-Hole Box
Pre-order
44,800
Factory Lead Time:16-18 weeks
4,480+$0.071
- +
Ext. Price(USD):$318.08
MOQ:4,480
Mult:4,480
JST
ECAD Model:
Conn Shrouded Header HDR 5 POS 1mm Solder RA SMD T/R
Pre-order
360,000
Factory Lead Time:18-22 weeks
26+
36,000+$0.1481
108,000+$0.1457
180,000+$0.1419
- +
Ext. Price(USD):$5,331.60
MOQ:36,000
Mult:36,000
SPQ:36,000
Wire-to-Board HDR 12 Pos 3mm Solder ST Top Entry TH Tray
Pre-order
1,215,000
Factory Lead Time:15 weeks
2,430+$1.1629
- +
Ext. Price(USD):$2,825.84
MOQ:2,430
Mult:2,430
SPQ:810
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$2.9927
- +
Ext. Price(USD):$2,693.43
MOQ:900
Mult:900
SPQ:450
Pre-order
337,500
Factory Lead Time:15 weeks
675+$0.9314
- +
Ext. Price(USD):$1,257.39
MOQ:1,350
Mult:675
SPQ:675
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.515
- +
Ext. Price(USD):$4,745.25
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.9001
- +
Ext. Price(USD):$2,160.24
MOQ:2,400
Mult:1,200
SPQ:1,200
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 8 POS 2mm Solder ST Top Entry SMD Tube
Pre-order
175,000
Factory Lead Time:22-26 weeks
1,750+$0.9375
3,500+$0.85
- +
Ext. Price(USD):$1,640.62
MOQ:1,750
Mult:1,750
SPQ:1,750
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.9227
- +
Ext. Price(USD):$1,384.05
MOQ:1,500
Mult:500
SPQ:500
JST
ECAD Model:
Conn IDC RCP 12 POS 2mm IDT RA Cable Mount Box
Available Stock
8,000
Estimated Ship Time:6-7 working days
25+
1,000+$0.1612
- +
Ext. Price(USD):$161.20
MOQ:1,000
Mult:1,000
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.921
- +
Ext. Price(USD):$1,105.20
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Pre-order
22,500
Factory Lead Time:22-26 weeks
225+$1.5625
900+$1.525
1,000+$1.4875
- +
Ext. Price(USD):$351.56
MOQ:225
Mult:225
SPQ:225
Wire-to-Board Connector HDR 24-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.6462
- +
Ext. Price(USD):$3,572.37
MOQ:1,350
Mult:450
SPQ:450
Molex
ECAD Model:
Conn Board Stacker HDR 8 POS 2mm Solder ST Top Entry Thru-Hole
Pre-order
162,000
Factory Lead Time:22-26 weeks
1,620+$0.7125
3,240+$0.6875
5,000+$0.65
- +
Ext. Price(USD):$1,154.25
MOQ:1,620
Mult:1,620
SPQ:1,620
Amphenol
Package:SMD,P=2.54mm
ECAD Model:
Pre-order
6,000
Factory Lead Time:10-16 weeks
24+
600+$5.0373
700+$4.9058
- +
Ext. Price(USD):$3,022.38
MOQ:600
Mult:100
SPQ:100
25 / PageGoto