Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Board Stacker HDR, 18 Pos, 1.27mm, Solder ST Top Entry, SMD, FLEX STACK™, T/R
Available Stock
200
Estimated Ship Time:7-9 working days
17+
125+$3.597
- +
Ext. Price(USD):$449.62
MOQ:125
Mult:125
SPQ:125
Conn Board Stacker HDR 32 POS 0.8mm Solder ST SMD Bulk
Available Stock
25
Estimated Ship Time:6-13 working days
1+$10.0395
10+$8.965
540+$6.2856
1,035+$6.1344
- +
Ext. Price(USD):$20.07
MOQ:2
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Unshrouded Header HDR 7 POS 5.08mm Solder ST Thru-Hole Bulk
Available Stock
40
Estimated Ship Time:6-13 working days
1+$2.8865
50+$2.4624
2,000+$1.7604
5,000+$1.5768
- +
Ext. Price(USD):$14.43
MOQ:5
Mult:1
SPQ:1
Connector, Board Stacker HDR, 2.54mm
Available Stock
2,500
Estimated Ship Time:7-10 working days
21+
1+$1.694
50+$1.375
5,000+$0.473
10,000+$0.363
- +
Ext. Price(USD):$30.49
MOQ:18
Mult:1
SPQ:1
Connector, Board Stacker HDR, 2.54mm, Solder Straight, Through Hole
Available Stock
49
Estimated Ship Time:6-13 working days
1+$5.3475
50+$4.4928
1,000+$3.186
2,500+$2.9052
- +
Ext. Price(USD):$16.04
MOQ:3
Mult:1
SPQ:1
Lumberg
ECAD Model:
RAST 5 HEADER 2 POLE UPRIGHT
Available Stock
970
Estimated Ship Time:9-14 working days
10+$1.1761
25+$1.1025
1,000+$0.8495
2,500+$0.7963
- +
Ext. Price(USD):$27.05
MOQ:23
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 5 POS 5.08mm Solder ST Top Entry Thru-Hole Carton
Available Stock
1,406
Estimated Ship Time:5-12 working days
50+$1.0615
250+$0.825
7,500+$0.6848
10,000+$0.6827
- +
Ext. Price(USD):$53.07
MOQ:50
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR, 32 POS, 2.54mm, Solder, ST Top Entry, Thru-Hole, Tube
Available Stock
9
Estimated Ship Time:6-13 working days
1+$28.721
7+$24.5808
252+$19.6452
504+$17.0316
- +
Ext. Price(USD):$28.72
MOQ:1
Mult:1
SPQ:1
Conn Shrouded Header HDR 16 POS 2mm Solder RA Thru-Hole Tube
Available Stock
77
Estimated Ship Time:6-13 working days
1+$6.8195
28+$5.7996
1,008+$3.9204
2,520+$3.3588
- +
Ext. Price(USD):$20.45
MOQ:3
Mult:1
SPQ:1
Unshrouded Header, 50-Pos, 2.54mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, Bulk
Available Stock
58
Estimated Ship Time:7-9 working days
20+
1+$3.773
50+$3.289
5,000+$1.43
10,000+$1.166
- +
Ext. Price(USD):$30.18
MOQ:8
Mult:1
SPQ:1
Conn Socket Strip SKT 2Power/40Signal POS 1.88mm/2mm Solder ST Top Entry Thru-Hole PowerStrip Tray
Available Stock
122
Estimated Ship Time:6-13 working days
1+$7.705
120+$6.6852
520+$6.5448
1,000+$6.5016
- +
Ext. Price(USD):$15.41
MOQ:2
Mult:1
SPQ:1
Wire-to-Board Connector
Available Stock
50,400
Estimated Ship Time:7-10 working days
22+
540+$0.3212
900+$0.3157
10,260+$0.2772
25,200+$0.2398
- +
Ext. Price(USD):$173.44
MOQ:540
Mult:180
SPQ:180
Conn Micro Socket Strip SKT 100 POS 1.27mm Solder ST Thru-Hole Tube
Available Stock
12
Estimated Ship Time:6-13 working days
1+$14.3405
9+$13.446
252+$10.3788
504+$9.6336
- +
Ext. Price(USD):$14.34
MOQ:1
Mult:1
SPQ:1
Lumberg
ECAD Model:
RAST 2.5 INDIRECT CONNECTOR 5 P
Available Stock
1,275
Estimated Ship Time:9-14 working days
100+$0.4368
150+$0.4244
600+$0.3848
650+$0.3826
- +
Ext. Price(USD):$43.68
MOQ:100
Mult:50
SPQ:1
Unshrouded Header Connector HDR 32 POS 2.54mm Solder RA Side Entry Thru-Hole Bulk
Available Stock
20
Estimated Ship Time:9-14 working days
1+$2.9808
50+$2.5931
100+$2.2572
500+$1.958
1,000+$1.8063
- +
Ext. Price(USD):$26.82
MOQ:9
Mult:1
SPQ:1
Molex
ECAD Model:
Wire-to-Board Connector
Available Stock
34
Estimated Ship Time:5-12 working days
5+$27.291
10+$14.168
250+$2.9532
500+$2.675
- +
Ext. Price(USD):$136.45
MOQ:5
Mult:1
SPQ:1
PCB SOCKET, SINGLE ROW, 9 PIN, S
Available Stock
1,301
Estimated Ship Time:9-14 working days
1+$0.5076
500+$0.4185
1,000+$0.3348
1,500+$0.2846
2,000+$0.2511
- +
Ext. Price(USD):$26.39
MOQ:52
Mult:1
SPQ:1
Molex
ECAD Model:
CONN ASSY 3.5 WTB ST BOSS 7CKT
Available Stock
74,000
Estimated Ship Time:3-4 weeks
21+
4,500+$0.1111
18,000+$0.1056
44,800+$0.1012
- +
Ext. Price(USD):$1,000.01
MOQ:9,001
Mult:1
SPQ:1
Available Stock
3
Estimated Ship Time:6-13 working days
1+$13.685
10+$12.528
500+$8.4672
1,000+$7.7544
- +
Ext. Price(USD):$27.37
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 20 POS 1.25mm Solder ST SMD
Available Stock
32,900
Estimated Ship Time:7-9 working days
20+
95+$0.616
1,000+$0.583
3,000+$0.561
6,000+$0.55
17,000+$0.528
- +
Ext. Price(USD):$58.52
MOQ:95
Mult:1
SPQ:1
Terminal Strip HDR 4-Power Pos 2.54mm/3.81mm Solder RA Side Entry TH PowerStrip™ Tray
Available Stock
19
Estimated Ship Time:6-13 working days
1+$9.062
10+$8.393
510+$5.832
1,020+$5.5836
- +
Ext. Price(USD):$18.12
MOQ:2
Mult:1
SPQ:1
Conn Shrouded Header HDR 2 POS 7.62mm Solder ST Thru-Hole Carton
Available Stock
200
Estimated Ship Time:5-12 working days
50+$0.5529
500+$0.4297
10,000+$0.3647
15,000+$0.3566
- +
Ext. Price(USD):$30.40
MOQ:55
Mult:1
SPQ:1
Samtec
ECAD Model:
Available Stock
276
Estimated Ship Time:6-13 working days
1+$25.0355
10+$23.004
25+$21.978
125+$18.6732
250+$18.6624
- +
Ext. Price(USD):$25.03
MOQ:1
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, 8 Pos, 2.54mm, Solder, ST, Top Entry, Thru-Hole, Bulk
Available Stock
3,657
Estimated Ship Time:7-9 working days
10+
1+$1.65
50+$1.287
1,000+$0.704
2,000+$0.638
- +
Ext. Price(USD):$31.35
MOQ:19
Mult:1
SPQ:1
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 20 POS 2.5mm Solder ST Top Entry Thru-Hole Box
Available Stock
101
Estimated Ship Time:9-14 working days
10+$0.7236
100+$0.6151
5,000+$0.4666
10,000+$0.4444
- +
Ext. Price(USD):$26.04
MOQ:36
Mult:1
SPQ:1
25 / PageGoto