Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Connector Board Stacker HDR 8 Pos 2mm Solder ST Top Entry SMD
Available Stock
132
Estimated Ship Time:6-13 working days
1+$1.9435
50+$1.826
5,040+$0.7528
10,010+$0.6869
- +
Ext. Price(USD):$15.54
MOQ:8
Mult:1
SPQ:1
Conn Socket Strip F 26 POS 1.27mm Solder RA Side Entry SMD
Available Stock
91
Estimated Ship Time:6-12 working days
1+$3.2509
- +
Ext. Price(USD):$26.00
MOQ:8
Mult:1
Molex
ECAD Model:
Conn Wire to Board RCP 2 POS 1.5mm Solder ST SMD T/R
Available Stock
19,800
Estimated Ship Time:7-9 working days
22+
900+$0.462
1,800+$0.451
10,800+$0.407
- +
Ext. Price(USD):$415.80
MOQ:900
Mult:900
SPQ:900
Conn Board Stacker HDR 10 POS 1.27mm Solder ST Top Entry Thru-Hole Layer
Available Stock
139
Estimated Ship Time:6-13 working days
1+$2.5875
50+$2.035
2,000+$1.512
5,000+$1.3716
- +
Ext. Price(USD):$15.52
MOQ:6
Mult:1
SPQ:1
Conn Unshrouded Header HDR 3 POS 5.08mm Solder ST SMD Layer
Available Stock
169
Estimated Ship Time:6-13 working days
1+$1.38
100+$1.078
5,000+$0.6264
10,000+$0.5443
- +
Ext. Price(USD):$15.18
MOQ:11
Mult:1
SPQ:1
MIL-DTL-55302 Series Connector
Available Stock
28
Estimated Ship Time:9-14 working days
1+$546.156
100+$535.2372
500+$524.5344
1,000+$514.0368
5,000+$503.766
- +
Ext. Price(USD):$546.15
MOQ:1
Mult:1
SPQ:1
Available Stock
6
Estimated Ship Time:6-13 working days
1+$7.222
10+$6.402
504+$5.238
1,008+$4.9896
- +
Ext. Price(USD):$14.44
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 19 POS 1.27mm Solder ST Top Entry Thru-Hole
Available Stock
928
Estimated Ship Time:9-14 working days
10+$0.8791
100+$0.7466
5,000+$0.5664
10,000+$0.5394
- +
Ext. Price(USD):$26.37
MOQ:30
Mult:1
SPQ:1
Samtec
Package:SMD,P=3.96mm
ECAD Model:
Conn Socket Strip SKT 16 POS 3.96mm Solder ST Top Entry SMD Tube
Available Stock
25
Estimated Ship Time:6-13 working days
1+$8.05
27+$6.9228
504+$5.2812
1,008+$4.8168
- +
Ext. Price(USD):$16.10
MOQ:2
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR, 9 Pos, 5.08mm, Solder ST Top Entry, Thru-Hole, Bulk
Available Stock
79
Estimated Ship Time:6-13 working days
1+$3.381
50+$2.592
2,000+$1.8252
5,000+$1.6092
- +
Ext. Price(USD):$16.90
MOQ:5
Mult:1
SPQ:1
multicomp
ECAD Model:
WTB CONN, HEADER, R/A, 11POS, 1ROW, 2MM;
Available Stock
6,036
Estimated Ship Time:6-12 working days
100+$0.1513
200+$0.1274
- +
Ext. Price(USD):$25.11
MOQ:166
Mult:1
Header 8 Pos 2.54mm Solder Straight Thru-Hole Bag
Available Stock
88,547
Estimated Ship Time:5-12 working days
250+$0.4255
500+$0.331
7,500+$0.2443
10,000+$0.2419
- +
Ext. Price(USD):$106.37
MOQ:250
Mult:1
SPQ:1,000
Conn Unshrouded Header HDR 4 POS 2mm Solder RA Side Entry SMD T/R
Available Stock
203
Estimated Ship Time:9-14 working days
1+$16.1244
100+$15.8004
500+$15.4872
1,000+$15.174
5,000+$14.8716
- +
Ext. Price(USD):$32.24
MOQ:2
Mult:1
SPQ:1
Available Stock
22,000
Estimated Ship Time:5-12 working days
200+$0.2487
1,000+$0.2097
50,000+$0.1807
100,000+$0.1713
- +
Ext. Price(USD):$49.74
MOQ:200
Mult:200
SPQ:200
Conn Unshrouded Header HDR 16 POS 5.08mm Solder ST Top Entry Thru-Hole
Available Stock
995
Estimated Ship Time:7-10 working days
21+
1+$4.048
50+$3.3
5,000+$1.452
10,000+$1.111
- +
Ext. Price(USD):$32.38
MOQ:8
Mult:1
SPQ:1
Low Profile Tiger Eye Header Strip
Available Stock
1,275
Estimated Ship Time:7-10 working days
21+
425+$1.012
850+$0.869
4,675+$0.484
31,450+$0.352
- +
Ext. Price(USD):$430.10
MOQ:425
Mult:425
SPQ:425
Conn Board Stacker HDR 20 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
20
Estimated Ship Time:6-13 working days
1+$4.3815
28+$3.817
1,008+$2.9376
2,520+$2.7648
- +
Ext. Price(USD):$17.52
MOQ:4
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 40 POS 2.2mm Solder RA SMD Automotive T/R
Available Stock
344
Estimated Ship Time:6-13 working days
1+$6.2675
10+$4.697
400+$3.4452
1,000+$3.3372
- +
Ext. Price(USD):$18.80
MOQ:3
Mult:1
SPQ:1
Wire to Board Connector, 70 POS, Right Angle Solder
Available Stock
63
Estimated Ship Time:7-9 working days
23+
21+$5.467
- +
Ext. Price(USD):$114.80
MOQ:21
Mult:1
SPQ:1
Conn Socket Terminal Strip HDR/SKT 40 POS 0.5mm Solder ST Top Entry SMD Razor Beam™ T/R
Available Stock
651
Estimated Ship Time:6-13 working days
1+$9.3035
10+$8.514
500+$5.832
800+$5.832
- +
Ext. Price(USD):$18.60
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Headers & Wire Housings Micro-Fit+ Vert Header 7 Circuits Black
Available Stock
2,875
Estimated Ship Time:7-9 working days
22+
90+$2.145
180+$2.112
360+$2.079
630+$2.046
1,440+$1.859
- +
Ext. Price(USD):$193.05
MOQ:90
Mult:1
SPQ:1
Unshrouded Header, 22 Pos, 2.54mm Pitch, Solder Tail, ST Top Entry, Thru-Hole, Bulk
Available Stock
111
Estimated Ship Time:6-13 working days
1+$2.1965
50+$2.068
2,000+$1.35
5,000+$1.2636
- +
Ext. Price(USD):$15.37
MOQ:7
Mult:1
SPQ:1
Pancon
ECAD Model:
Available Stock
2,185
Estimated Ship Time:5-12 working days
144+$0.3516
576+$0.3218
50,112+$0.1769
100,080+$0.1739
- +
Ext. Price(USD):$50.63
MOQ:144
Mult:144
SPQ:144
Connector, Board Stacker HDR, 2.54mm, Solder Straight, Through Hole
Available Stock
90
Estimated Ship Time:6-13 working days
1+$3.0705
50+$2.7864
2,000+$1.8252
5,000+$1.674
- +
Ext. Price(USD):$15.35
MOQ:5
Mult:1
SPQ:1
Conn Wire-to-Board F 9 POS Crimp ST Cable Mount Loose
Available Stock
13,600
Estimated Ship Time:7-9 working days
20+
200+$0.693
450+$0.66
1,800+$0.638
4,500+$0.616
- +
Ext. Price(USD):$138.60
MOQ:200
Mult:1
SPQ:1
25 / PageGoto