Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
multicomp
ECAD Model:
Wire to Board HDR 2 POS 2.5mm Solder ST Thru-Hole
Available Stock
6,076
Estimated Ship Time:6-12 working days
200+$0.0282
- +
Ext. Price(USD):$25.01
MOQ:887
Mult:1
Straight and Right Angle Cable a
Available Stock
83
Estimated Ship Time:9-14 working days
1+$194.832
10+$190.9332
50+$187.11
100+$183.3732
500+$179.7012
- +
Ext. Price(USD):$194.83
MOQ:1
Mult:1
SPQ:1
Straight and Right Angle Cable a
Available Stock
81
Estimated Ship Time:9-14 working days
2+$146.1888
10+$143.262
20+$140.4
100+$137.592
500+$134.838
- +
Ext. Price(USD):$292.37
MOQ:2
Mult:2
SPQ:1
Conn Socket Strip SKT 3Power/12Signal POS 5.08mm/2.54mm Solder ST Thru-Hole Tube
Available Stock
7
Estimated Ship Time:6-13 working days
1+$11.0055
17+$9.72
510+$7.3332
1,003+$7.1064
- +
Ext. Price(USD):$22.01
MOQ:2
Mult:1
SPQ:1
Board to Board Receptacle AMPMODU 2mm
Available Stock
738
Estimated Ship Time:7-9 working days
23+
112+$1.342
308+$1.309
504+$1.287
- +
Ext. Price(USD):$150.30
MOQ:112
Mult:28
SPQ:28
Box Header With Ejectors 2.54mm (0.100)
Available Stock
8,134
Estimated Ship Time:9-14 working days
1+$1.4904
210+$1.391
420+$0.9936
840+$0.6955
- +
Ext. Price(USD):$26.82
MOQ:18
Mult:1
SPQ:1
WAGO
ECAD Model:
Pre-order
5,000
Factory Lead Time:4-5 weeks
50+$3.0587
250+$3.0078
500+$2.9313
5,000+$2.8803
- +
Ext. Price(USD):$152.93
MOQ:50
Mult:50
SPQ:50
Conn Socket Strip SKT 5 POS 2.54mm Press Fit ST Top Entry Thru-Hole Tube
Available Stock
122
Estimated Ship Time:6-13 working days
1+$2.2195
41+$2.035
2,009+$1.2096
5,002+$1.1772
- +
Ext. Price(USD):$15.53
MOQ:7
Mult:1
SPQ:1
Conn Wire to Board HDR 6Power POS 2mm Press Fit ST Top Entry TH PowerStrip Tube
Available Stock
8
Estimated Ship Time:6-13 working days
1+$7.59
48+$6.48
512+$5.0544
1,008+$4.644
- +
Ext. Price(USD):$15.18
MOQ:2
Mult:1
SPQ:1
Conn Isolated Power Socket SKT 16Power POS 4.19mm Solder ST Top Entry Thru-Hole Power Mate® Tube
Available Stock
34
Estimated Ship Time:6-13 working days
1+$3.0935
25+$2.948
1,008+$1.9656
2,512+$1.8684
- +
Ext. Price(USD):$15.46
MOQ:5
Mult:1
SPQ:1
CONNECTOR, HEADER, 10POS, 2ROW, 2.5MM; Pitch Spacing:2.54mm; No. of Contacts:10Contacts; Gender:Header; Product Range:-; Contact Termination Type:Through Hole; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; Con
Available Stock
546
Estimated Ship Time:6-12 working days
50+$0.2718
100+$0.2513
200+$0.241
- +
Ext. Price(USD):$25.00
MOQ:92
Mult:1
Unshrouded Header, 30 POS, 2mm Pitch, Solder, ST, Top Entry, TH
Available Stock
647
Estimated Ship Time:5-12 working days
10+$2.8474
50+$2.6015
2,500+$1.422
5,000+$0.9962
- +
Ext. Price(USD):$31.32
MOQ:11
Mult:1
SPQ:1
Conn Board Stacker HDR 48 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
100
Estimated Ship Time:7-9 working days
21+
12+$9.966
36+$9.328
1,008+$4.521
2,004+$3.586
- +
Ext. Price(USD):$119.59
MOQ:12
Mult:12
SPQ:12
Conn Unshrouded Header HDR 4Power/16Signal POS 5.08mm/2.54mm Solder ST Thru-Hole Tube
Available Stock
41
Estimated Ship Time:6-13 working days
1+$6.325
52+$5.184
104+$4.4928
507+$4.212
1,001+$3.8556
- +
Ext. Price(USD):$18.97
MOQ:3
Mult:1
SPQ:1
Harwin
ECAD Model:
CONN RCPT IDC 1.27MM 26POS
Available Stock
280
Estimated Ship Time:9-14 working days
1+$7.668
10+$6.5146
500+$4.9431
1,040+$4.6944
- +
Ext. Price(USD):$30.67
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
Molex SPOX 5.08mm Pitch 6-Pin Header Wire-to-Board Connector, Straight, TH
Available Stock
210
Estimated Ship Time:5-10 working days
10+$0.5927
50+$0.5506
250+$0.4971
- +
Ext. Price(USD):$11.85
MOQ:20
Mult:10
Available Stock
556
Estimated Ship Time:6-13 working days
1+$0.575
50+$0.5658
2,000+$0.2624
5,000+$0.2128
- +
Ext. Price(USD):$14.37
MOQ:25
Mult:1
SPQ:1
Amphenol ICC Minitek Series 2.0mm Pitch 25-Pin Single Row Header, TH
Available Stock
2,338
Estimated Ship Time:6-13 working days
25+$0.2772
100+$0.2519
250+$0.1947
1,000+$0.1706
- +
Ext. Price(USD):$14.13
MOQ:51
Mult:1
SPQ:1
Spring Loaded Connector HDR 2 POS 4mm Solder Cup ST Thru-Hole
Available Stock
803
Estimated Ship Time:9-14 working days
1+$13.5108
23+$10.8258
506+$8.7051
1,012+$8.2902
- +
Ext. Price(USD):$27.02
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Ten60 R/A Plug Assy G-6AC-50S-G
Available Stock
65
Estimated Ship Time:7-9 working days
19+
4+$15.169
21+$14.564
- +
Ext. Price(USD):$60.67
MOQ:4
Mult:1
SPQ:1
CONN HEADER VERT 10POS 2.54MM
Available Stock
5,648
Estimated Ship Time:9-14 working days
1+$4.7844
10+$4.0684
100+$3.4573
500+$3.1358
- +
Ext. Price(USD):$28.70
MOQ:6
Mult:1
SPQ:1
Pancon
ECAD Model:
Ejector Header Connector, HDR, 50 POS, 2.54mm Pitch, Solder, ST, Thru-Hole, Tray
Available Stock
326
Estimated Ship Time:5-12 working days
50+$3.157
100+$3.146
5,000+$2.354
7,500+$2.3433
- +
Ext. Price(USD):$157.85
MOQ:50
Mult:50
SPQ:50
PIN HEADER, SINGLE ROW, 3 PIN, R
Available Stock
1,000
Estimated Ship Time:9-14 working days
1+$0.5184
1,000+$0.432
2,000+$0.3974
3,000+$0.3456
4,000+$0.2074
- +
Ext. Price(USD):$26.43
MOQ:51
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Micro-Fit+ Series Header, 14-Pin Dual Row, 3.0mm Pitch, Vertical, TH
Available Stock
710
Estimated Ship Time:7-10 working days
20+
37+$3.19
95+$3.146
200+$3.091
400+$3.036
- +
Ext. Price(USD):$118.03
MOQ:37
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Header 2Power Position Right Angle Solder Tail Power BMI
Available Stock
499
Estimated Ship Time:7-9 working days
22+
11+$10.637
30+$10.461
55+$10.274
150+$10.087
504+$9.163
- +
Ext. Price(USD):$117.00
MOQ:11
Mult:1
SPQ:1
25 / PageGoto