Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pancon
ECAD Model:
IDC Connector F 4 POS 2.54mm IDT RA Cable Mount Bag
Available Stock
2,904
Estimated Ship Time:5-12 working days
500+$0.2842
1,000+$0.267
50,000+$0.174
100,000+$0.1722
- +
Ext. Price(USD):$142.10
MOQ:500
Mult:500
SPQ:500
Conn Shrouded Header (4 Sides) HDR 8Power/40Signal POS 6.35mm/2.54mm Solder ST Top Entry Thru-Hole PowerStrip™ Tray
Available Stock
7
Estimated Ship Time:6-13 working days
1+$26.933
10+$23.9004
112+$18.1656
256+$17.9712
- +
Ext. Price(USD):$26.93
MOQ:1
Mult:1
SPQ:1
Conn Board Stacker HDR 6 POS 5.08mm Solder ST Thru-Hole Bulk
Available Stock
80
Estimated Ship Time:6-13 working days
1+$3.3695
50+$3.024
1,000+$2.43
2,000+$2.3868
- +
Ext. Price(USD):$16.84
MOQ:5
Mult:1
SPQ:1
Connector Board Stacker Header 3 POS 3.96mm Solder Straight Thru-Hole Bulk
Available Stock
135
Estimated Ship Time:6-13 working days
1+$1.3685
500+$1.0433
5,000+$0.7042
10,000+$0.6793
- +
Ext. Price(USD):$15.05
MOQ:11
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR, 32 POS, 2.54mm, Solder, ST Top Entry, Thru-Hole, Tube
Available Stock
42
Estimated Ship Time:6-13 working days
1+$5.037
28+$4.5144
1,001+$3.3588
2,506+$3.0996
- +
Ext. Price(USD):$15.11
MOQ:3
Mult:1
SPQ:1
Conn Wire to Board HDR 18Power/80Signal POS (2.54mm/3.81)mm/2.54mm Solder ST Top Entry Thru-Hole PwrBlade® Tray
Available Stock
2,772
Estimated Ship Time:7-9 working days
21+
4+$29.557
17+$28.325
34+$27.192
169+$26.103
506+$25.014
- +
Ext. Price(USD):$118.22
MOQ:4
Mult:1
SPQ:1
Shrouded Header 18 Pos 4.68mm Solder Right Angle Side Entry Thru-Hole
Available Stock
110
Estimated Ship Time:9-14 working days
1+$33.5232
10+$28.4904
140+$23.6523
- +
Ext. Price(USD):$33.52
MOQ:1
Mult:1
SPQ:1
Conn Open Pin Field Array HDR 40 POS 0.8mm Solder ST Top Entry SMD SEARAY™ T/R
Available Stock
1,530
Estimated Ship Time:6-13 working days
1+$13.846
10+$12.0096
100+$9.0936
325+$9.0828
- +
Ext. Price(USD):$27.69
MOQ:2
Mult:1
SPQ:1
Conn Micro Socket Strip SKT 80 POS 0.8mm Solder ST SMD T/R
Available Stock
3,340
Estimated Ship Time:6-13 working days
1+$14.1105
10+$11.2644
500+$9.5148
950+$8.8668
- +
Ext. Price(USD):$14.11
MOQ:1
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 2 POS 5mm Solder ST Top Entry Thru-Hole Box
Available Stock
1,585
Estimated Ship Time:6-13 working days
25+$0.3473
50+$0.2956
1,200+$0.1847
5,400+$0.175
- +
Ext. Price(USD):$14.23
MOQ:41
Mult:1
SPQ:1
Amphenol IDC Connector, T812 Series, Receptacle, 6-Ch, 2-Row, 2.54mm Pitch, Wire Mount
Available Stock
4,720
Estimated Ship Time:9-12 working days
100+$0.2628
500+$0.2551
1,000+$0.2474
2,500+$0.2436
5,000+$0.2385
- +
Ext. Price(USD):$36.79
MOQ:140
Mult:10
CONN SPRING PISTON 2POS SMD
Available Stock
265
Estimated Ship Time:9-14 working days
1+$4.6764
10+$3.969
100+$3.3733
250+$3.162
- +
Ext. Price(USD):$28.05
MOQ:6
Mult:1
SPQ:1
Conn Spring Loaded Connector HDR 3 POS 4mm Solder Cup ST Thru-Hole
Available Stock
27
Estimated Ship Time:9-14 working days
1+$19.9152
19+$16.1739
266+$13.4268
513+$12.8195
- +
Ext. Price(USD):$39.83
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 26 POS 1.27mm Solder ST Top Entry SMD Tube
Available Stock
123
Estimated Ship Time:7-9 working days
22+
35+$8.063
70+$7.898
1,015+$4.422
2,030+$3.146
- +
Ext. Price(USD):$282.20
MOQ:35
Mult:35
SPQ:35
Terminal Strip M 3Power POS 1.88mm/3.12mm Solder ST Top Entry TH PowerStrip™ Tray
Available Stock
78
Estimated Ship Time:6-13 working days
1+$5.98
25+$5.4
90+$5.3568
540+$4.9896
1,080+$4.86
- +
Ext. Price(USD):$17.94
MOQ:3
Mult:1
SPQ:1
Available Stock
19
Estimated Ship Time:6-13 working days
1+$2.2425
50+$1.958
2,030+$1.242
5,040+$1.1448
- +
Ext. Price(USD):$15.69
MOQ:7
Mult:1
SPQ:1
Conn Header Box PIN 110 POS 2.54mm Solder RA Thru-Hole
Available Stock
5
Estimated Ship Time:5-12 working days
1+$1,991.0667
5+$1,986.0912
23+$718.719
30+$704.3489
- +
Ext. Price(USD):$1,991.06
MOQ:1
Mult:1
SPQ:2
Conn Shrouded Header HDR 5mm Right Angle 5C PC 1x12P BK
Available Stock
140
Estimated Ship Time:5-12 working days
25+$1.541
100+$1.419
5,000+$1.2198
7,500+$1.2091
- +
Ext. Price(USD):$38.52
MOQ:25
Mult:1
SPQ:1
Unshrouded Header, 14 Pos, 2.54mm, Solder, ST, Top Entry, SMD, T/R
Available Stock
50
Estimated Ship Time:9-14 working days
1+$6.201
- +
Ext. Price(USD):$31.00
MOQ:5
Mult:1
SPQ:1
Headers&Wire Housings HEADER
Available Stock
2
Estimated Ship Time:7-9 working days
15+
1+$1,164.856
- +
Ext. Price(USD):$1,164.85
MOQ:1
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Friction Lock Header 6-Pin 2.54mm Pitch R/A
Available Stock
1,632
Estimated Ship Time:9-14 working days
100+$0.2123
500+$0.1895
1,000+$0.1804
5,000+$0.161
10,000+$0.1533
- +
Ext. Price(USD):$26.11
MOQ:123
Mult:1
SPQ:1
V23535A2200A102=BKMOD421 HEADE
Available Stock
694
Estimated Ship Time:7-9 working days
15+
70+$1.661
200+$1.628
400+$1.595
- +
Ext. Price(USD):$116.27
MOQ:70
Mult:1
SPQ:1
Conn Socket Strip SKT 8Power/12Signal POS 6.35mm/2.54mm Solder RA Side Entry Thru-Hole PowerStrip™ Bulk
Available Stock
12
Estimated Ship Time:6-13 working days
1+$40.634
10+$36.9468
108+$27.6156
252+$27.2052
- +
Ext. Price(USD):$40.63
MOQ:1
Mult:1
SPQ:1
Unshrouded Header, 20-Pos, 2.54mm, Solder, ST, Thru-Hole
Available Stock
28
Estimated Ship Time:9-14 working days
1+$32.2164
10+$27.3791
100+$23.275
500+$20.7796
- +
Ext. Price(USD):$32.21
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
Header Unshrouded 24 POS 2.54mm Solder ST Top Entry TH BergStik® Bag
Available Stock
1,800
Estimated Ship Time:7-9 working days
16+
347+$0.3179
1,570+$0.3047
- +
Ext. Price(USD):$110.31
MOQ:347
Mult:1
SPQ:1
25 / PageGoto