Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Connector Receptacle 54 POS 1.27mm Solder Straight Thru-Hole
Available Stock
312
Estimated Ship Time:9-14 working days
1+$232.7076
10+$228.0528
50+$223.4952
100+$219.024
500+$214.6392
- +
Ext. Price(USD):$232.70
MOQ:1
Mult:1
SPQ:1
5 POS 1.00MM(.039) SINGLE ROW ST
Available Stock
2,308
Estimated Ship Time:9-14 working days
100+$0.166
500+$0.1482
- +
Ext. Price(USD):$26.06
MOQ:157
Mult:1
SPQ:1
IDC Connector, F, 4 POS, 2.54mm, IDT, RA, Side Entry, Cable Mount, MAS-CON
Available Stock
1,500
Estimated Ship Time:5-12 working days
500+$0.2033
1,000+$0.1934
50,000+$0.1355
100,000+$0.135
- +
Ext. Price(USD):$101.65
MOQ:500
Mult:500
SPQ:500
Connector Header Surface Mount 24 position 0.050 (1.27mm)
Available Stock
299
Estimated Ship Time:7-9 working days
23+
38+$3.96
76+$3.883
2,508+$2.068
5,016+$1.507
- +
Ext. Price(USD):$150.48
MOQ:38
Mult:38
SPQ:38
Molex
ECAD Model:
1.5 W/BSGLRARECASSY8CKTGRNEMBSTP
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Wire to Board Connector HDR 16 Pos 2.54mm Solder Straight Top Entry TH Bulk
Available Stock
150
Estimated Ship Time:6-13 working days
1+$2.0355
50+$1.925
100+$1.7928
500+$1.2528
- +
Ext. Price(USD):$14.24
MOQ:7
Mult:1
SPQ:1
Conn Unshrouded Header HDR 10 POS 1.27mm Solder ST Top Entry SMD Tube
Available Stock
54
Estimated Ship Time:6-13 working days
1+$4.922
25+$4.4388
1,012+$2.9484
2,576+$2.7108
- +
Ext. Price(USD):$14.76
MOQ:3
Mult:1
SPQ:1
Elevated Shrouded Header, HDR, 14 POS, 2mm Pitch, ST Thru-Hole
Available Stock
3
Estimated Ship Time:6-13 working days
1+$7.291
25+$6.2424
500+$5.0004
1,000+$4.752
- +
Ext. Price(USD):$14.58
MOQ:2
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 8Power/40Signal POS 6.35mm/2.54mm Solder ST Top Entry Thru-Hole PowerStrip™ Tray
Available Stock
34
Estimated Ship Time:9-14 working days
1+$23.4144
10+$21.6778
25+$19.939
50+$17.5109
- +
Ext. Price(USD):$46.82
MOQ:2
Mult:1
SPQ:1
Socket Strip, SKT, 10 Pos, 1.27mm Pitch, Solder, ST, Thru-Hole, Tube
Available Stock
154
Estimated Ship Time:6-13 working days
1+$1.7825
44+$1.639
5,016+$0.715
10,032+$0.6966
- +
Ext. Price(USD):$14.26
MOQ:8
Mult:1
SPQ:1
Unshrouded Header, HDR, 10 Pos, 2.54mm Pitch, Solder, ST Top Entry, Thru-Hole
Available Stock
8
Estimated Ship Time:6-13 working days
1+$2.7715
50+$2.268
2,000+$1.6956
5,000+$1.5012
- +
Ext. Price(USD):$16.62
MOQ:6
Mult:1
SPQ:1
Conn Socket Strip SKT 13 POS 2.54mm Press Fit ST Top Entry Thru-Hole Tube
Available Stock
27
Estimated Ship Time:6-13 working days
1+$5.4395
48+$4.5684
1,008+$3.2076
2,000+$2.8728
- +
Ext. Price(USD):$16.31
MOQ:3
Mult:1
SPQ:1
Available Stock
44
Estimated Ship Time:5-12 working days
25+$14.531
50+$12.84
500+$11.4704
1,000+$11.3206
- +
Ext. Price(USD):$363.27
MOQ:25
Mult:1
SPQ:1
Conn Board Stacker HDR 10POS 2mm Solder ST Top Entry SMD T/R
Available Stock
122
Estimated Ship Time:9-14 working days
10+$30.3696
50+$29.754
100+$29.16
500+$28.5768
1,000+$28.0044
- +
Ext. Price(USD):$303.69
MOQ:10
Mult:10
SPQ:1
Conn Board Stacker HDR 10 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
212
Estimated Ship Time:6-13 working days
1+$2.4265
50+$2.2464
2,000+$1.35
5,000+$1.2204
- +
Ext. Price(USD):$14.55
MOQ:6
Mult:1
SPQ:1
Unshrouded Header HDR 2 POS 5.08mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
517
Estimated Ship Time:5-12 working days
1+$0.6025
500+$0.5088
10,000+$0.2345
15,000+$0.2281
- +
Ext. Price(USD):$30.12
MOQ:50
Mult:1
SPQ:1
Conn Wire to Board PL 71 POS 1.9mm Solder Cup ST Top Entry Panel Mount
Available Stock
51
Estimated Ship Time:9-14 working days
1+$358.4628
10+$351.2916
50+$344.2608
100+$337.3812
500+$330.6312
- +
Ext. Price(USD):$358.46
MOQ:1
Mult:1
SPQ:1
Conn Socket Strip SKT 2 POS 2.54mm Solder RA Side Entry SMD Bulk
Available Stock
100
Estimated Ship Time:6-13 working days
1+$0.943
50+$0.7249
5,000+$0.3186
10,000+$0.2106
- +
Ext. Price(USD):$14.14
MOQ:15
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Unshrouded Header HDR 20 POS 2.54mm Solder ST Top Entry Thru-Hole C-Grid III Tray
Available Stock
475
Estimated Ship Time:5-12 working days
80+$0.9825
400+$0.9313
800+$0.8949
1,600+$0.8731
- +
Ext. Price(USD):$78.60
MOQ:80
Mult:1
SPQ:1
Conn Unshrouded Header HDR 72 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
4
Estimated Ship Time:6-13 working days
1+$24.0925
10+$22.6044
100+$21.2004
250+$19.3104
- +
Ext. Price(USD):$24.09
MOQ:1
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, 14 Pos, 2.54mm Pitch, Solder, ST Top Entry, TH, Tube
Available Stock
2
Estimated Ship Time:6-13 working days
1+$8.1995
25+$7.128
48+$6.9552
- +
Ext. Price(USD):$16.39
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 10 POS 1.27mm Solder ST Top Entry SMD Tube
Available Stock
134
Estimated Ship Time:6-13 working days
1+$2.438
50+$2.013
5,060+$0.945
10,028+$0.8186
- +
Ext. Price(USD):$14.62
MOQ:6
Mult:1
SPQ:1
Conn Board Stacker HDR 6 POS 2.54mm Solder ST Top Entry Thru-Hole FLEX STACK
Available Stock
196
Estimated Ship Time:6-13 working days
1+$1.3915
500+$0.9623
5,000+$0.5843
10,000+$0.5227
- +
Ext. Price(USD):$15.30
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 48 POS 2.54mm Solder RA Thru-Hole Stac64 Tray
Available Stock
2,688
Estimated Ship Time:7-9 working days
22+
64+$3.113
160+$2.97
256+$2.882
448+$2.827
1,216+$2.475
- +
Ext. Price(USD):$199.23
MOQ:64
Mult:32
SPQ:32
Power to the Board Minitek Power3.0 SR RA SMT HDR
Available Stock
1,600
Estimated Ship Time:7-9 working days
22+
1,600+$0.693
- +
Ext. Price(USD):$1,108.80
MOQ:1,600
Mult:1,600
SPQ:1,600
25 / PageGoto