Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Header Strip 8Pos 2mm Solder Straight Thru-Hole 48Term 1Port
Available Stock
252
Estimated Ship Time:6-13 working days
1+$7.4405
10+$6.864
104+$5.8536
507+$5.8104
1,001+$5.6052
- +
Ext. Price(USD):$14.88
MOQ:2
Mult:1
SPQ:1
Connector Interface M 8-Pos 1.27mm Solder RA SMD Tube
Available Stock
351
Estimated Ship Time:6-13 working days
1+$2.369
55+$2.1276
2,035+$1.3176
5,005+$1.242
- +
Ext. Price(USD):$14.21
MOQ:6
Mult:1
SPQ:1
Conn Shrouded Header HDR 60 POS 2mm Solder ST SMD Tube
Available Stock
15
Estimated Ship Time:6-13 working days
1+$16.1575
8+$14.904
256+$11.1132
504+$11.0916
- +
Ext. Price(USD):$16.15
MOQ:1
Mult:1
SPQ:1
Socket Strip, SKT, 6 POS, 1.27mm Pitch, Solder, ST, Thru-Hole, Bulk
Available Stock
5,086
Estimated Ship Time:5-12 working days
1+$0.7113
250+$0.6241
10,000+$0.2433
15,000+$0.2367
- +
Ext. Price(USD):$30.58
MOQ:43
Mult:1
SPQ:1
Unshrouded Header HDR 6 Pos 1.27mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
45
Estimated Ship Time:6-13 working days
1+$0.759
50+$0.6138
5,000+$0.4007
10,000+$0.3067
- +
Ext. Price(USD):$14.42
MOQ:19
Mult:1
SPQ:1
Conn Wire to Board HDR 2 POS 6.35mm Solder ST Top Entry Thru-Hole PowerStrip™ Tray
Available Stock
254
Estimated Ship Time:6-13 working days
1+$7.038
25+$5.6484
504+$4.482
1,008+$4.0068
- +
Ext. Price(USD):$14.07
MOQ:2
Mult:1
SPQ:1
Available Stock
869
Estimated Ship Time:5-12 working days
50+$1.5568
250+$1.254
5,000+$1.1128
7,500+$1.1021
- +
Ext. Price(USD):$77.84
MOQ:50
Mult:50
SPQ:50
Pancon
ECAD Model:
Available Stock
14,529
Estimated Ship Time:5-12 working days
500+$0.229
1,000+$0.2219
50,000+$0.1676
100,000+$0.167
- +
Ext. Price(USD):$114.50
MOQ:500
Mult:500
SPQ:500
Conn Unshrouded Header HDR 16 POS 2.54mm Solder RA Thru-Hole
Available Stock
52
Estimated Ship Time:6-13 working days
1+$2.1045
50+$1.947
2,000+$1.2096
5,000+$1.0012
- +
Ext. Price(USD):$14.73
MOQ:7
Mult:1
SPQ:1
Socket, Low Profile Dual-Wipe, 1.00mm Pitch
Available Stock
16
Estimated Ship Time:6-13 working days
1+$5.704
25+$5.022
50+$4.8168
110+$4.3524
- +
Ext. Price(USD):$17.11
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Wire to Board HDR, 4 POS, 5mm Pitch, Solder, ST Top Entry, TH, Bag
Available Stock
15,600
Estimated Ship Time:3-4 weeks
19+
3,000+$0.3146
6,000+$0.2959
15,000+$0.2772
- +
Ext. Price(USD):$1,000.11
MOQ:3,179
Mult:1
SPQ:1
ASSMANN WSW Board-to-Board Connector, AW Series, Right Angle, TH, 20-Pin, 2.54mm Pitch
Available Stock
95
Estimated Ship Time:5-10 working days
5+$2.4524
75+$2.3784
250+$2.3045
500+$2.2561
1,250+$2.2076
- +
Ext. Price(USD):$12.26
MOQ:5
Mult:5
WAGO
ECAD Model:
Pre-order
2,500
Factory Lead Time:4-5 weeks
25+$6.9183
125+$6.803
250+$6.63
2,500+$6.5147
- +
Ext. Price(USD):$172.95
MOQ:25
Mult:25
SPQ:25
Samtec
Package:SMD,P=0.8mm,Horizontal SMD
ECAD Model:
Conn Card Edge SKT 50 POS 0.8mm Solder RA SMD Bulk
Available Stock
967
Estimated Ship Time:5-12 working days
5+$8.0845
25+$7.48
500+$4.9648
1,000+$3.9911
- +
Ext. Price(USD):$40.42
MOQ:5
Mult:1
SPQ:50
Available Stock
124
Estimated Ship Time:6-13 working days
1+$2.231
50+$1.958
5,000+$0.9266
10,000+$0.8381
- +
Ext. Price(USD):$15.61
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
IDC Connector, F, 8 POS, 2.5mm, IDT, RA, Cable Mount, Tray
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Available Stock
5,900
Estimated Ship Time:6-13 working days
25+$0.4589
100+$0.396
6,000+$0.2689
12,000+$0.2527
- +
Ext. Price(USD):$14.22
MOQ:31
Mult:1
SPQ:1
Unshrouded Header, 15 Pos 1.27mm Solder ST Top Entry Thru-Hole Tube
Available Stock
65
Estimated Ship Time:6-13 working days
1+$2.967
60+$2.5056
1,020+$2.0088
2,010+$1.8144
- +
Ext. Price(USD):$14.83
MOQ:5
Mult:1
SPQ:1
Available Stock
14
Estimated Ship Time:6-13 working days
1+$11.9715
10+$10.868
522+$7.7868
1,015+$7.506
- +
Ext. Price(USD):$23.94
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 6 POS 2.54mm Press Fit ST Top Entry Thru-Hole Bulk
Available Stock
112
Estimated Ship Time:6-13 working days
1+$1.817
50+$1.353
5,000+$0.4925
10,000+$0.4471
- +
Ext. Price(USD):$14.53
MOQ:8
Mult:1
SPQ:1
Available Stock
38
Estimated Ship Time:6-13 working days
1+$4.3585
25+$4.026
1,000+$3.1752
2,500+$2.7432
- +
Ext. Price(USD):$17.43
MOQ:4
Mult:1
SPQ:1
Wire to Board Connector HDR 8 Pos 3.81mm Solder RA Side Entry Thru-Hole
Available Stock
350
Estimated Ship Time:5-12 working days
2+$8.74
25+$3.192
500+$2.0544
1,000+$1.9474
- +
Ext. Price(USD):$34.96
MOQ:4
Mult:1
SPQ:50
Samtec
ECAD Model:
Socket Strip, SKT, 4 Pos, 2.54mm, Solder, ST, Top Entry, TH, Bulk
Available Stock
41
Estimated Ship Time:7-9 working days
18+
1+$2.772
- +
Ext. Price(USD):$30.49
MOQ:11
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Socket Strip SKT 36 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
32
Estimated Ship Time:6-13 working days
1+$4.6345
54+$3.942
1,002+$3.24
2,004+$3.1428
- +
Ext. Price(USD):$18.53
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
Available Stock
3,731
Estimated Ship Time:6-13 working days
1+$1.7825
10+$1.61
500+$1.2744
1,000+$1.1772
- +
Ext. Price(USD):$14.26
MOQ:8
Mult:1
SPQ:1
25 / PageGoto