Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
CONN HEADER SMD 26POS 2.54MM
Available Stock
1,987
Estimated Ship Time:9-14 working days
10+$1.418
120+$1.1896
600+$1.0619
1,080+$1.0187
- +
Ext. Price(USD):$26.94
MOQ:19
Mult:1
SPQ:1
Conn Socket Strip RCP 5 POS 1.27mm Solder ST Top Entry Thru-Hole
Available Stock
795
Estimated Ship Time:6-12 working days
100+$0.2236
- +
Ext. Price(USD):$25.71
MOQ:115
Mult:5
Conn Shrouded Header (4 Sides) HDR 6 POS 5.08mm Solder ST Top Entry Thru-Hole Carton
Available Stock
917
Estimated Ship Time:5-12 working days
25+$1.2639
250+$0.9823
7,500+$0.8132
10,000+$0.8046
- +
Ext. Price(USD):$31.59
MOQ:25
Mult:1
SPQ:1
Unshrouded Header, 46 Pos, 2.54mm, Solder, ST, Top Entry, Thru-Hole
Available Stock
28
Estimated Ship Time:6-13 working days
1+$4.7265
25+$4.356
1,000+$3.0456
2,500+$2.7432
- +
Ext. Price(USD):$14.17
MOQ:3
Mult:1
SPQ:1
Available Stock
4,037
Estimated Ship Time:5-12 working days
25+$1.2639
250+$0.9823
7,500+$0.8132
10,000+$0.8046
- +
Ext. Price(USD):$31.59
MOQ:25
Mult:1
SPQ:1
Conn Board Stacker HDR 8 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
165
Estimated Ship Time:6-13 working days
1+$1.357
50+$1.287
5,040+$0.5562
10,010+$0.5443
- +
Ext. Price(USD):$14.92
MOQ:11
Mult:1
SPQ:1
Conn Unshrouded Header HDR 84 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
81
Estimated Ship Time:5-12 working days
1+$31.0155
5+$27.797
100+$23.1227
250+$20.2444
- +
Ext. Price(USD):$31.01
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Wire-to-Board M, 7 POS, 2.5mm, Solder, ST, Thru-Hole
Available Stock
3,400
Estimated Ship Time:7-9 working days
19+
569+$0.1023
- +
Ext. Price(USD):$58.20
MOQ:569
Mult:1
SPQ:1
Conn IDC Connector SKT 60 POS 2.54mm IDT RA Cable
Available Stock
258
Estimated Ship Time:7-9 working days
10+
20+$5.764
87+$5.533
173+$5.313
- +
Ext. Price(USD):$115.28
MOQ:20
Mult:1
SPQ:1
Wire-to-Board Connector RCP 5 POS 7mm Solder ST Thru-Hole
Available Stock
1,400
Estimated Ship Time:3-4 weeks
23+
152+$6.061
756+$5.819
- +
Ext. Price(USD):$1,000.06
MOQ:165
Mult:1
SPQ:1
Samtec
ECAD Model:
Socket Strip, SKT, 6-Pos, 2.54mm, Solder, ST, Top Entry, TH, Bulk
Available Stock
336
Estimated Ship Time:6-13 working days
1+$2.6565
50+$2.079
5,000+$0.8024
10,000+$0.7225
- +
Ext. Price(USD):$15.93
MOQ:6
Mult:1
SPQ:1
Harwin
ECAD Model:
CONN RCPT IDC 1.27MM 68POS
Available Stock
220
Estimated Ship Time:9-14 working days
1+$12.474
10+$10.597
520+$8.0187
1,040+$7.6364
- +
Ext. Price(USD):$37.42
MOQ:3
Mult:1
SPQ:1
Conn Board Stacker HDR 24 POS 1mm Solder ST SMD Bulk
Available Stock
567
Estimated Ship Time:6-13 working days
1+$8.5905
25+$7.29
48+$7.2684
96+$6.0048
528+$5.2488
- +
Ext. Price(USD):$17.18
MOQ:2
Mult:1
SPQ:1
Conn Micro High Speed Terminal Strip HDR 240 POS 0.5mm Solder ST SMD Tray
Available Stock
12
Estimated Ship Time:6-13 working days
1+$37.422
26+$31.2228
52+$29.6028
104+$25.2288
260+$23.004
- +
Ext. Price(USD):$37.42
MOQ:1
Mult:1
SPQ:1
0.050" (1.27MM) PITCH, RECEPTACL
Available Stock
103
Estimated Ship Time:9-14 working days
1+$6.6204
13+$5.518
1,001+$4.0613
2,509+$3.8066
- +
Ext. Price(USD):$26.48
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Socket Strip SKT 1 POS Solder ST Top Entry Thru-Hole Bulk
Available Stock
250
Estimated Ship Time:6-13 working days
1+$0.4945
50+$0.4819
5,000+$0.297
25,000+$0.2927
- +
Ext. Price(USD):$14.34
MOQ:29
Mult:1
SPQ:1
Right Angle Cable and Plated Thr
Available Stock
219
Estimated Ship Time:9-14 working days
2+$114.804
10+$112.5036
20+$110.2572
100+$108.0432
500+$105.8832
- +
Ext. Price(USD):$229.60
MOQ:2
Mult:2
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, 6 Pos, 5.08mm Pitch, Solder, ST Top Entry, TH, Bulk
Available Stock
60
Estimated Ship Time:6-13 working days
1+$2.3
50+$2.178
100+$1.8144
500+$1.674
- +
Ext. Price(USD):$16.10
MOQ:7
Mult:1
SPQ:1
Wire-to-Board Connector Receptacle, 4 POS, 7.62mm Pitch, Solder RA Side Entry, Thru-Hole, Box
Available Stock
48
Estimated Ship Time:9-14 working days
1+$11.34
10+$8.046
48+$6.5632
- +
Ext. Price(USD):$34.02
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Wire to Board HDR 6 POS 4.2mm Solder ST Thru-Hole Mini-Fit® Bag
Available Stock
2,452
Estimated Ship Time:7-9 working days
06+
500+$0.2112
- +
Ext. Price(USD):$105.60
MOQ:500
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector, F, 2 POS, 3.96mm, IDT, RA, Cable Mount
Available Stock
5,500
Estimated Ship Time:5-12 working days
500+$0.211
1,000+$0.2008
50,000+$0.1406
100,000+$0.1402
- +
Ext. Price(USD):$105.50
MOQ:500
Mult:500
SPQ:500
Available Stock
11
Estimated Ship Time:6-13 working days
1+$4.324
25+$4.092
1,000+$3.2184
2,500+$2.9268
- +
Ext. Price(USD):$17.29
MOQ:4
Mult:1
SPQ:1
Conn Unshrouded Header HDR 5 POS 2.54mm Solder ST Top Entry Thru-Hole MAS-CON®
Available Stock
1,000
Estimated Ship Time:5-12 working days
500+$0.3297
1,000+$0.3097
25,000+$0.209
50,000+$0.2084
- +
Ext. Price(USD):$164.85
MOQ:500
Mult:500
SPQ:500
Conn Socket Strip SKT 4Power/4Signal POS 5.08mm/2mm Solder ST Thru-Hole Tube
Available Stock
19
Estimated Ship Time:6-13 working days
1+$6.4745
21+$5.6484
1,008+$3.888
2,520+$3.2292
- +
Ext. Price(USD):$19.42
MOQ:3
Mult:1
SPQ:1
Header, Unshrouded, 4 Pos, 5.08mm, Solder RA Side Entry, TH, Bulk
Available Stock
230
Estimated Ship Time:6-13 working days
1+$1.2765
50+$0.9438
5,000+$0.5702
10,000+$0.4482
- +
Ext. Price(USD):$14.04
MOQ:11
Mult:1
SPQ:1
25 / PageGoto