Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
RS PRO
ECAD Model:
RS PRO Header 2.54mm Pitch 72-Pin Double Row Straight TH
Available Stock
1,800
Estimated Ship Time:5-10 working days
10+$1.2988
150+$1.2593
500+$1.2211
1,000+$1.1981
5,000+$0.9827
- +
Ext. Price(USD):$12.98
MOQ:10
Mult:10
Conn Wire to Board PL 70 POS 2.54mm Solder Cup ST Panel Mount
Available Stock
244
Estimated Ship Time:9-14 working days
1+$320.0904
10+$313.686
50+$307.4112
100+$301.266
500+$295.2396
- +
Ext. Price(USD):$320.09
MOQ:1
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector, F, 2 POS, 3.96mm, IDT, RA, Cable Mount
Available Stock
119
Estimated Ship Time:5-12 working days
100+$0.4494
500+$0.3846
10,000+$0.2607
15,000+$0.2573
- +
Ext. Price(USD):$44.94
MOQ:100
Mult:100
SPQ:100
Conn Micro Socket Strip SKT 26 POS 1.27mm Solder ST Thru-Hole Tube
Available Stock
46
Estimated Ship Time:7-9 working days
18+
34+$3.993
- +
Ext. Price(USD):$135.76
MOQ:34
Mult:34
SPQ:34
Shrouded Header HDR, 20 Pos, 2mm Pitch, Solder RA Thru-Hole Tube
Available Stock
46
Estimated Ship Time:6-13 working days
1+$4.2665
57+$3.618
1,007+$2.9376
2,014+$2.8512
- +
Ext. Price(USD):$17.06
MOQ:4
Mult:1
SPQ:1
Conn IDC Connector F 24 POS 2.54mm IDT RA Cable Mount
Available Stock
1,738
Estimated Ship Time:5-12 working days
1+$2.4265
25+$2.3184
500+$2.0865
1,000+$2.033
- +
Ext. Price(USD):$31.54
MOQ:13
Mult:1
SPQ:600
Conn Shrouded Header HDR 15 POS 5.08mm Solder RA Thru-Hole
Available Stock
167
Estimated Ship Time:5-12 working days
25+$3.024
100+$2.079
5,000+$1.7655
7,500+$1.7548
- +
Ext. Price(USD):$75.60
MOQ:25
Mult:1
SPQ:250
Samtec
ECAD Model:
IDC Connector, M, 26 POS, 2.54mm, IDT, Right Angle, Cable Mount
Available Stock
10
Estimated Ship Time:6-13 working days
1+$15.0995
10+$12.4848
510+$8.1
1,005+$7.9596
- +
Ext. Price(USD):$15.09
MOQ:1
Mult:1
SPQ:1
Unshrouded Header, 24 Pos, 2.54mm Pitch, Solder, ST, Top Entry, TH
Available Stock
109
Estimated Ship Time:6-13 working days
1+$1.6445
50+$1.364
5,000+$0.8834
10,000+$0.8467
- +
Ext. Price(USD):$14.80
MOQ:9
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR, 4 Pos, 2.54mm Pitch, Solder ST Top Entry Thru-Hole
Available Stock
108
Estimated Ship Time:5-12 working days
25+$1.6112
100+$1.4817
2,500+$0.9256
5,000+$0.7554
- +
Ext. Price(USD):$40.28
MOQ:25
Mult:1
SPQ:1
Conn Socket Strip SKT 50 POS 1.27mm Solder ST SMD Tube
Available Stock
28
Estimated Ship Time:6-13 working days
1+$14.122
18+$13.2516
504+$9.7956
1,008+$8.2944
- +
Ext. Price(USD):$14.12
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Automotive Conn STAC64 RAHDR 2BAY 32CKT 16A-16B
Available Stock
672
Estimated Ship Time:7-9 working days
17+
38+$1.551
400+$1.496
- +
Ext. Price(USD):$58.93
MOQ:38
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Unshrouded Header HDR 40 POS 1.27mm Solder ST Top Entry SMD T/R
Available Stock
11,560
Estimated Ship Time:6-13 working days
1+$1.702
100+$1.3608
250+$1.2852
400+$0.9504
- +
Ext. Price(USD):$15.31
MOQ:9
Mult:1
SPQ:1
Unshrouded Header HDR, 4 Pos, 2.54mm Pitch, Solder ST Top Entry Thru-Hole
Available Stock
540
Estimated Ship Time:6-13 working days
1+$0.483
50+$0.3945
5,000+$0.2635
25,000+$0.2614
- +
Ext. Price(USD):$14.00
MOQ:29
Mult:1
SPQ:1
Samtec Header, 1.27mm Pitch, 10-Pin Double Row, FTSH Series, Vertical
Available Stock
7,474
Estimated Ship Time:6-13 working days
1+$2.1505
500+$2.0196
1,000+$1.9548
2,500+$1.9116
- +
Ext. Price(USD):$15.05
MOQ:7
Mult:1
SPQ:1
Header 2 Pos 1.27mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
310
Estimated Ship Time:6-13 working days
1+$0.9545
25+$0.9534
5,000+$0.3445
10,000+$0.2614
- +
Ext. Price(USD):$14.31
MOQ:15
Mult:1
SPQ:1
.250 Inch Connector, 40A High-Power Socket Strip
Available Stock
35
Estimated Ship Time:6-13 working days
1+$18.124
10+$16.2108
280+$11.6208
520+$11.61
- +
Ext. Price(USD):$18.12
MOQ:1
Mult:1
SPQ:1
Unshrouded Header, 8-Pos, 2mm Pitch, Solder, ST Top Entry, Thru-Hole
Available Stock
34
Estimated Ship Time:6-13 working days
1+$1.449
50+$1.177
5,000+$0.5659
10,000+$0.3942
- +
Ext. Price(USD):$14.49
MOQ:10
Mult:1
SPQ:1
Conn Unshrouded Header HDR 6 POS 5mm Solder ST Top Entry Thru-Hole Carton
Available Stock
1,684
Estimated Ship Time:5-12 working days
10+$2.2655
50+$2.0944
1,000+$0.5181
2,500+$0.4783
- +
Ext. Price(USD):$31.71
MOQ:14
Mult:1
SPQ:50
Available Stock
10
Estimated Ship Time:6-13 working days
1+$18.745
10+$17.2152
250+$13.932
500+$12.4416
- +
Ext. Price(USD):$18.74
MOQ:1
Mult:1
SPQ:1
Conn Socket Strip SKT 9 POS 2.54mm Solder ST Bottom Entry SMD Bulk
Available Stock
50
Estimated Ship Time:6-13 working days
1+$4.1055
25+$3.586
1,000+$2.8944
2,500+$2.7216
- +
Ext. Price(USD):$16.42
MOQ:4
Mult:1
SPQ:1
Phoenix Contact PCB Connector Kit, FP Series, Includes SMD Plug Connector
Available Stock
192
Estimated Ship Time:9-14 working days
1+$8.229
- +
Ext. Price(USD):$32.91
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR 20 Pos 5.08mm Solder Straight Thru-Hole Bulk
Available Stock
99
Estimated Ship Time:7-9 working days
20+
1+$5.236
25+$4.73
50+$4.4
- +
Ext. Price(USD):$31.41
MOQ:6
Mult:1
SPQ:1
Connector, Board Stacker HDR, 2.54mm, Solder Straight, Through Hole
Available Stock
33
Estimated Ship Time:6-13 working days
1+$6.808
50+$5.2272
1,000+$4.3632
2,000+$4.0068
- +
Ext. Price(USD):$20.42
MOQ:3
Mult:1
SPQ:1
Available Stock
562
Estimated Ship Time:5-12 working days
5+$3.013
50+$2.739
1,000+$0.6741
2,500+$0.642
- +
Ext. Price(USD):$30.13
MOQ:10
Mult:1
SPQ:50
25 / PageGoto