Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Unshrouded Header HDR 26 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
37
Estimated Ship Time:6-13 working days
1+$3.335
50+$2.8836
1,000+$2.4084
2,000+$2.2464
- +
Ext. Price(USD):$16.67
MOQ:5
Mult:1
SPQ:1
Shrouded Header 18 Pos 4.68mm Solder Right Angle Side Entry Thru-Hole
Available Stock
128
Estimated Ship Time:6-13 working days
1+$29.084
10+$24.2784
100+$20.52
280+$19.9368
- +
Ext. Price(USD):$29.08
MOQ:1
Mult:1
SPQ:1
40 Position Header Spacer Connector 0.079 (2.00mm) Gold Surface Mount
Available Stock
160
Estimated Ship Time:7-9 working days
22+
14+$8.129
28+$7.601
1,008+$3.652
2,002+$2.871
- +
Ext. Price(USD):$113.80
MOQ:14
Mult:14
SPQ:14
Conn Socket Strip SKT 2Power/16Signal POS 1.88mm/2mm Solder ST Top Entry Thru-Hole PowerStrip™ Tray
Available Stock
103
Estimated Ship Time:6-13 working days
1+$7.1875
25+$6.5772
540+$5.7132
1,080+$5.5512
- +
Ext. Price(USD):$14.37
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 14 POS 3.96mm Solder ST Thru-Hole Bulk
Available Stock
51
Estimated Ship Time:6-13 working days
1+$4.6345
50+$4.104
1,000+$2.862
2,000+$2.7108
- +
Ext. Price(USD):$18.53
MOQ:4
Mult:1
SPQ:1
OUPIIN
ECAD Model:
Conn Shrouded Header HDR 20 POS 2.54mm Solder ST Thru-Hole Tray
Available Stock
474
Estimated Ship Time:9-14 working days
1+$1.296
500+$1.2096
1,000+$0.864
2,000+$0.6048
- +
Ext. Price(USD):$27.21
MOQ:21
Mult:1
SPQ:1
Samtec
ECAD Model:
Socket Strip, SKT, 4 Pos, 2.54mm, Solder, ST, Top Entry, TH, Bulk
Available Stock
5,327
Estimated Ship Time:5-12 working days
1+$1.3384
250+$1.1454
7,500+$0.5733
10,000+$0.4729
- +
Ext. Price(USD):$30.78
MOQ:23
Mult:1
SPQ:1
multicomp
ECAD Model:
Unshrouded Header, HDR, 2 Pos, 2.54mm, Solder ST Top Entry, Thru-Hole
Available Stock
1,634
Estimated Ship Time:6-12 working days
1+$0.1359
250+$0.1013
500+$0.0913
1,000+$0.0813
5,000+$0.0742
- +
Ext. Price(USD):$25.00
MOQ:184
Mult:1
Molex
ECAD Model:
Molex 2.5mm Pitch 7-Pin Single Row Header, 5267 Series
Available Stock
400
Estimated Ship Time:5-10 working days
100+$0.2961
1,000+$0.2902
2,500+$0.2816
- +
Ext. Price(USD):$29.61
MOQ:100
Mult:100
Available Stock
5
Estimated Ship Time:6-13 working days
1+$3.5995
50+$3.0672
1,000+$2.2464
2,000+$2.0196
- +
Ext. Price(USD):$14.39
MOQ:4
Mult:1
SPQ:1
Pancon
ECAD Model:
Available Stock
1,547
Estimated Ship Time:5-12 working days
100+$0.5116
500+$0.4378
10,000+$0.3425
15,000+$0.3417
- +
Ext. Price(USD):$51.16
MOQ:100
Mult:100
SPQ:100
Board Stacker Connector HDR 20-Pin 0.8mm Solder Straight SMD
Available Stock
69
Estimated Ship Time:6-13 working days
1+$8.6135
120+$6.5664
300+$6.2964
540+$5.7996
1,020+$5.7132
- +
Ext. Price(USD):$17.22
MOQ:2
Mult:1
SPQ:1
Available Stock
45
Estimated Ship Time:6-13 working days
1+$6.8425
75+$5.454
300+$5.3352
450+$5.3244
900+$4.698
- +
Ext. Price(USD):$20.52
MOQ:3
Mult:1
SPQ:1
Conn Board Stacker HDR 6 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
228
Estimated Ship Time:6-13 working days
1+$1.1385
50+$1.078
10,000+$0.2851
25,000+$0.284
- +
Ext. Price(USD):$14.80
MOQ:13
Mult:1
SPQ:1
Shrouded Header HDR 24 POS 2.54mm Solder RA Thru-Hole
Available Stock
120
Estimated Ship Time:7-9 working days
21+
50+$2.321
- +
Ext. Price(USD):$116.05
MOQ:50
Mult:1
SPQ:1
High-Speed Hermaphroditic Strip
Available Stock
285
Estimated Ship Time:9-14 working days
1+$9.7524
10+$8.2836
100+$7.0405
250+$6.7815
- +
Ext. Price(USD):$29.25
MOQ:3
Mult:1
SPQ:1
Pin Header, Board Mount, Vertical, 2x2 Pin, 2.54mm Pitch, Matte Tin, LCP, 6.0mm × 2.5mm × 3.0mm
Available Stock
5,790
Estimated Ship Time:6-13 working days
10+$0.1702
100+$0.1461
6,000+$0.1058
12,000+$0.0961
- +
Ext. Price(USD):$14.12
MOQ:83
Mult:1
SPQ:1
JST
ECAD Model:
JST Wire-to-Board Connector, CL Series, 22-18 AWG, 20mm Total Length, Red
Available Stock
270
Estimated Ship Time:5-10 working days
5+$0.3136
125+$0.3059
250+$0.3008
- +
Ext. Price(USD):$7.84
MOQ:25
Mult:5
Conn Wire to Board HDR 16 POS 2.54mm Solder RA Side Entry Thru-Hole Mini Mate® Bulk
Available Stock
58
Estimated Ship Time:6-13 working days
1+$3.9675
21+$3.74
1,008+$2.4408
2,520+$2.322
- +
Ext. Price(USD):$15.87
MOQ:4
Mult:1
SPQ:1
Shrouded Header Connector, 2 POS, 5mm Pitch, Solder, Straight, Thru-Hole
Available Stock
1,753
Estimated Ship Time:5-12 working days
250+$0.5574
1,000+$0.4644
25,000+$0.4259
50,000+$0.4248
- +
Ext. Price(USD):$139.35
MOQ:250
Mult:250
SPQ:250
multicomp
ECAD Model:
TRANSITION, IDC, 14WAY; Pitch Spacing:2.54mm; No. of Contacts:14Contacts; Gender:Plug; Product Range:-; Contact Termination Type:Through Hole; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; Contact Material:Cop
Available Stock
1,423
Estimated Ship Time:6-12 working days
100+$0.209
200+$0.2013
- +
Ext. Price(USD):$25.08
MOQ:120
Mult:1
multicomp
ECAD Model:
WTB CONN, HEADER, 6POS, 2ROW, 2MM;
Available Stock
1,787
Estimated Ship Time:6-12 working days
100+$0.1513
200+$0.1295
- +
Ext. Price(USD):$25.11
MOQ:166
Mult:1
Conn Micro High Speed Terminal Strip HDR 80 POS 0.8mm Solder ST SMD
Available Stock
52
Estimated Ship Time:6-13 working days
1+$10.695
112+$9.4932
280+$9.3204
504+$8.9856
- +
Ext. Price(USD):$21.39
MOQ:2
Mult:1
SPQ:1
Pancon
ECAD Model:
Available Stock
3,804
Estimated Ship Time:5-12 working days
500+$0.2311
1,000+$0.2259
50,000+$0.1472
100,000+$0.1438
- +
Ext. Price(USD):$115.55
MOQ:500
Mult:500
SPQ:500
Conn Board Stacker HDR 3 POS 2.54mm Solder ST Top Entry Thru-Hole FLEX STACK
Available Stock
45
Estimated Ship Time:6-13 working days
1+$0.4715
50+$0.4152
2,000+$0.1879
5,000+$0.1728
- +
Ext. Price(USD):$14.14
MOQ:30
Mult:1
SPQ:1
25 / PageGoto