Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Samtec TSW Series, 2.54mm Pitch, 150-Pin, 3 Rows, Right Angle Pin Header
Available Stock
50
Estimated Ship Time:5-12 working days
5+$16.1728
10+$15.653
250+$11.1922
500+$9.3304
- +
Ext. Price(USD):$80.86
MOQ:5
Mult:1
SPQ:1
Conn Header Unshrouded Wire-to-Board, SMD
Available Stock
900
Estimated Ship Time:5-12 working days
60+$1.624
120+$1.562
5,040+$1.1128
7,500+$1.1021
- +
Ext. Price(USD):$97.44
MOQ:60
Mult:60
SPQ:60
Elevated Shrouded Header, 20 Pos, 1.27mm Pitch, Solder, ST, TH, Bulk
Available Stock
50
Estimated Ship Time:7-9 working days
18+
1+$11.781
10+$10.879
25+$10.285
50+$9.922
- +
Ext. Price(USD):$35.34
MOQ:3
Mult:1
SPQ:1
Unshrouded Header HDR, 9 Pos, 5.08mm, Solder ST Top Entry, Thru-Hole, Bulk
Available Stock
92
Estimated Ship Time:6-13 working days
1+$3.059
50+$2.3436
2,000+$1.728
5,000+$1.5552
- +
Ext. Price(USD):$15.29
MOQ:5
Mult:1
SPQ:1
Conn Board Stacker HDR 2 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
897
Estimated Ship Time:6-13 working days
1+$0.3335
50+$0.322
2,000+$0.1436
5,000+$0.1339
- +
Ext. Price(USD):$14.00
MOQ:42
Mult:1
SPQ:1
Conn Unshrouded Header HDR 10 POS 1.27mm Solder ST Top Entry SMD Layer
Available Stock
62
Estimated Ship Time:6-13 working days
1+$4.1055
50+$3.6288
92+$3.0672
1,012+$2.8836
2,024+$2.7648
- +
Ext. Price(USD):$16.42
MOQ:4
Mult:1
SPQ:1
Unshrouded Header, 5 Pos, 1.27mm Pitch, Solder, ST, Top Entry, TH, Bulk
Available Stock
135
Estimated Ship Time:6-13 working days
1+$1.4375
25+$1.364
5,000+$0.5702
10,000+$0.4439
- +
Ext. Price(USD):$14.37
MOQ:10
Mult:1
SPQ:1
Molex
ECAD Model:
Board Connector 26 Contact(s) 2 Row(s) Male R
Available Stock
28,800
Estimated Ship Time:7-9 working days
24+
63+$1.166
313+$1.111
1,250+$1.056
3,125+$1.012
9,375+$0.968
- +
Ext. Price(USD):$73.45
MOQ:63
Mult:1
SPQ:1
Available Stock
55
Estimated Ship Time:6-13 working days
1+$5.2555
50+$4.5036
1,000+$3.3048
2,000+$3.0888
- +
Ext. Price(USD):$15.76
MOQ:3
Mult:1
SPQ:1
Surface Mount PCB Socket Strips, .100Inch pitch
Available Stock
450
Estimated Ship Time:7-10 working days
21+
450+$3.685
900+$3.278
1,350+$2.838
2,700+$2.464
5,400+$2.079
- +
Ext. Price(USD):$1,658.25
MOQ:450
Mult:450
SPQ:450
Headers&Wire Housings 16P IDC SOCKET
Available Stock
1,660
Estimated Ship Time:7-9 working days
18+
20+$5.742
50+$5.742
250+$5.434
1,000+$4.95
- +
Ext. Price(USD):$114.84
MOQ:20
Mult:1
SPQ:1
Nicomatic
Package:SMD,P=1mm
ECAD Model:
FEM. 10POS STRAIGHT SMT 1.27MM
Available Stock
18
Estimated Ship Time:9-14 working days
1+$39.1068
25+$35.1756
100+$31.698
500+$28.5228
1,000+$27.0864
- +
Ext. Price(USD):$39.10
MOQ:1
Mult:1
SPQ:1
Elevated Shrouded Header HDR 20 POS 2mm Solder ST Thru-Hole
Available Stock
21
Estimated Ship Time:6-13 working days
1+$7.728
25+$6.6096
500+$5.4972
1,000+$5.2704
- +
Ext. Price(USD):$15.45
MOQ:2
Mult:1
SPQ:1
Shrouded Header (4 Sides), HDR 6 Pos, 3.5mm Pitch, Solder ST Thru-Hole
Available Stock
2,000
Estimated Ship Time:7-9 working days
10+
351+$0.3135
1,589+$0.3003
- +
Ext. Price(USD):$110.03
MOQ:351
Mult:1
SPQ:1
Socket Strip SKT 20 Pos 2.54mm Solder RA Side Entry TH TIGER CLAW™ Bulk
Available Stock
5
Estimated Ship Time:6-13 working days
1+$3.8065
42+$3.402
504+$2.6568
1,008+$2.2464
2,016+$1.9656
- +
Ext. Price(USD):$15.22
MOQ:4
Mult:1
SPQ:1
FLEXIBLE BOARD STACKING HEADER,
Available Stock
221
Estimated Ship Time:9-14 working days
1+$2.821
- +
Ext. Price(USD):$28.21
MOQ:10
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, HDR, 10 Pos, 2.54mm Pitch, Solder, ST Top Entry, Thru-Hole, Tube
Available Stock
39
Estimated Ship Time:6-13 working days
1+$5.819
44+$5.184
110+$4.3416
506+$4.1688
1,012+$3.8664
- +
Ext. Price(USD):$17.45
MOQ:3
Mult:1
SPQ:1
Pancon
ECAD Model:
Available Stock
649
Estimated Ship Time:5-12 working days
100+$0.5573
300+$0.4769
10,000+$0.3526
15,000+$0.3516
- +
Ext. Price(USD):$55.73
MOQ:100
Mult:100
SPQ:100
Unshrouded Header, 20 Pos, 2mm Pitch, Solder, ST, Top Entry, Thru-Hole
Available Stock
20
Estimated Ship Time:6-13 working days
1+$3.312
50+$2.7756
2,000+$1.9872
5,000+$1.5876
- +
Ext. Price(USD):$16.56
MOQ:5
Mult:1
SPQ:1
68 Position SAS/PCIe Receptacle Connector Solder Surface Mount Right Angle; Through Hole
Available Stock
220
Estimated Ship Time:7-9 working days
20+
9+$12.958
39+$12.408
77+$11.913
- +
Ext. Price(USD):$116.62
MOQ:9
Mult:1
SPQ:1
Molex
ECAD Model:
Shrouded Header, 3-Pos, 2.5mm Pitch, Solder, ST, Top Entry, Thru-Hole, Tape
Available Stock
32,400
Estimated Ship Time:7-9 working days
20+
188+$0.3102
675+$0.3003
1,350+$0.2926
2,700+$0.2838
5,000+$0.2574
- +
Ext. Price(USD):$58.31
MOQ:188
Mult:1
SPQ:1
Straight Cable and Plated Thru H
Available Stock
40
Estimated Ship Time:9-14 working days
1+$244.4472
10+$239.5656
50+$234.7704
100+$230.0724
500+$225.4716
- +
Ext. Price(USD):$244.44
MOQ:1
Mult:1
SPQ:1
Conn Board Stacker HDR 12 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
150
Estimated Ship Time:5-12 working days
47+$2.662
100+$2.354
5,000+$1.003
7,500+$0.9735
- +
Ext. Price(USD):$125.11
MOQ:47
Mult:47
SPQ:1
Conn Socket Strip SKT 4Power POS 5mm Solder RA Side Entry Thru-Hole Tray
Available Stock
206
Estimated Ship Time:6-13 working days
1+$6.095
504+$4.4604
1,008+$4.3092
- +
Ext. Price(USD):$18.28
MOQ:3
Mult:1
SPQ:1
Unshrouded Header, 40-Pos, 2.54mm Pitch, Right Angle Side Entry, Thru-Hole Bulk
Available Stock
19
Estimated Ship Time:6-13 working days
1+$9.6945
10+$8.58
500+$6.5988
1,000+$5.7888
- +
Ext. Price(USD):$19.38
MOQ:2
Mult:1
SPQ:1
25 / PageGoto