Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Unshrouded Header HDR 3 POS 5.08mm Solder ST Top Entry Thru-Hole
Available Stock
207
Estimated Ship Time:6-13 working days
1+$1.4145
50+$1.232
5,000+$0.7571
10,000+$0.7128
- +
Ext. Price(USD):$14.14
MOQ:10
Mult:1
SPQ:1
Conn Shrouded Header HDR 2 POS 5.08mm Solder RA Thru-Hole Carton
Available Stock
180
Estimated Ship Time:5-12 working days
100+$0.3936
500+$0.3369
10,000+$0.3056
15,000+$0.3031
- +
Ext. Price(USD):$39.36
MOQ:100
Mult:100
SPQ:100
Wire-to-Board HDR, 19 Power Pos, 3.96mm Pitch, Solder, ST, TH
Available Stock
27
Estimated Ship Time:9-14 working days
1+$34.02
100+$33.3396
500+$32.67
1,000+$32.022
5,000+$31.374
- +
Ext. Price(USD):$34.02
MOQ:1
Mult:1
SPQ:1
Available Stock
230
Estimated Ship Time:6-13 working days
1+$1.1385
50+$0.8525
2,000+$0.6275
5,000+$0.6134
- +
Ext. Price(USD):$14.80
MOQ:13
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, HDR, 10 Pos, 2.54mm Pitch, Solder, ST Top Entry, Thru-Hole, Tube
Available Stock
74
Estimated Ship Time:6-13 working days
1+$7.0035
44+$6.5664
88+$5.0328
- +
Ext. Price(USD):$14.00
MOQ:2
Mult:1
SPQ:1
Socket Strip SKT 8 POS 2.54mm Solder RA Side Entry SMD T/R
Available Stock
575
Estimated Ship Time:7-9 working days
25+
575+$1.837
1,150+$1.386
2,300+$1.232
5,175+$0.935
10,350+$0.627
- +
Ext. Price(USD):$1,056.27
MOQ:575
Mult:575
SPQ:575
Available Stock
352
Estimated Ship Time:5-12 working days
2+$8.74
25+$3.192
500+$2.0544
1,000+$1.9474
- +
Ext. Price(USD):$34.96
MOQ:4
Mult:1
SPQ:50
WAGO
ECAD Model:
Wago 5.08mm Pitch 8-Pin Pluggable Terminal Block Receptacle, 231 Series
Available Stock
1,051
Estimated Ship Time:4-7 working days
100+$1.0816
500+$1.0636
1,000+$1.0366
10,000+$1.0185
- +
Ext. Price(USD):$108.16
MOQ:100
Mult:100
SPQ:100
Available Stock
25
Estimated Ship Time:6-13 working days
1+$4.7265
50+$3.6072
1,000+$2.8512
2,000+$2.7216
- +
Ext. Price(USD):$14.17
MOQ:3
Mult:1
SPQ:1
Connector Unshrouded Header HDR 6 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
249
Estimated Ship Time:6-13 working days
1+$1.9665
500+$1.3068
1,000+$1.1988
2,000+$1.0649
5,000+$0.9342
- +
Ext. Price(USD):$15.73
MOQ:8
Mult:1
SPQ:1
Molex
ECAD Model:
Conn RCP 8 POS 3.96mm Solder ST Thru-Hole Bag
Available Stock
163
Estimated Ship Time:5-12 working days
150+$0.5275
700+$0.506
2,800+$0.4676
7,200+$0.4548
22,800+$0.4301
- +
Ext. Price(USD):$79.12
MOQ:150
Mult:1
SPQ:1
Lumberg
ECAD Model:
IDC Connector F 3 POS 2.5mm IDT RA Cable Mount
Available Stock
24,625
Estimated Ship Time:9-14 working days
100+$0.287
150+$0.2788
600+$0.2528
650+$0.2514
- +
Ext. Price(USD):$28.70
MOQ:100
Mult:50
SPQ:1
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Available Stock
1,190
Estimated Ship Time:6-13 working days
10+$1.1431
25+$1.0971
2,400+$0.6631
4,800+$0.6512
- +
Ext. Price(USD):$14.86
MOQ:13
Mult:1
SPQ:1
.100Inch Mini Mate Isolated Power Terminal Header
Available Stock
140
Estimated Ship Time:6-13 working days
1+$5.175
25+$4.312
1,000+$3.132
2,400+$2.9916
- +
Ext. Price(USD):$15.52
MOQ:3
Mult:1
SPQ:1
Conn Socket Strip SKT 4 POS 2mm Press Fit ST Thru-Hole Layer
Available Stock
85
Estimated Ship Time:6-13 working days
1+$2.783
50+$2.5164
2,000+$1.6848
5,000+$1.5444
- +
Ext. Price(USD):$16.69
MOQ:6
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector F 5 POS 2.54mm IDT RA Cable Mount Bag
Available Stock
3,674
Estimated Ship Time:5-12 working days
500+$0.3127
1,000+$0.312
15,000+$0.2446
25,000+$0.225
- +
Ext. Price(USD):$156.35
MOQ:500
Mult:500
SPQ:500
Amphenol IDC Connector, T812 Series, Receptacle, 26 Pos, 2 Row, 2.54mm Pitch, Wire Mount
Available Stock
126
Estimated Ship Time:5-10 working days
1+$1.3766
10+$1.3384
100+$1.3129
500+$1.2746
1,000+$1.2491
- +
Ext. Price(USD):$6.88
MOQ:5
Mult:1
Conn Shrouded Header HDR 11 POS 2.54mm Solder ST Thru-Hole
Available Stock
2,493
Estimated Ship Time:7-9 working days
10+
159+$0.693
721+$0.66
1,441+$0.638
- +
Ext. Price(USD):$110.18
MOQ:159
Mult:1
SPQ:1
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Available Stock
899
Estimated Ship Time:6-13 working days
1+$1.61
10+$1.403
2,250+$0.8197
4,950+$0.7981
- +
Ext. Price(USD):$14.49
MOQ:9
Mult:1
SPQ:1
Unshrouded Header, 3 Pos, 1.27mm Pitch, Solder, ST Top Entry, TH
Available Stock
2,000
Estimated Ship Time:5-12 working days
100+$0.3598
500+$0.3287
10,000+$0.145
15,000+$0.1432
- +
Ext. Price(USD):$35.98
MOQ:100
Mult:1
SPQ:1
Available Stock
95
Estimated Ship Time:6-13 working days
1+$2.5415
100+$1.728
2,000+$1.3824
5,000+$1.1988
- +
Ext. Price(USD):$15.24
MOQ:6
Mult:1
SPQ:1
Wire-to-Board Connector HDR 8 Pos 6.35mm Solder ST Top Entry TH PowerStrip™ Tray
Available Stock
50
Estimated Ship Time:6-13 working days
1+$23.575
10+$20.1744
270+$16.3188
510+$15.8976
- +
Ext. Price(USD):$23.57
MOQ:1
Mult:1
SPQ:1
Open Pin Field Array HDR Connector, 300 Pos, 0.8mm Pitch, Solder ST Top Entry SMD, SEARAY™ T/R
Available Stock
117
Estimated Ship Time:6-13 working days
1+$39.699
275+$29.6784
- +
Ext. Price(USD):$39.69
MOQ:1
Mult:1
SPQ:1
Unshrouded Header, HDR, 1 Pos, Solder, ST, Top Entry, Thru-Hole, Bulk
Available Stock
7,323
Estimated Ship Time:9-14 working days
1+$1.1988
1,000+$0.999
2,000+$0.9191
3,000+$0.7992
4,000+$0.4795
- +
Ext. Price(USD):$26.37
MOQ:22
Mult:1
SPQ:1
Samtec TSW Series, 2.54mm Pitch, 50-Pin Single Row Header
Available Stock
3,797
Estimated Ship Time:6-13 working days
1+$2.6565
50+$2.484
100+$2.1384
500+$1.9872
1,000+$1.674
- +
Ext. Price(USD):$15.93
MOQ:6
Mult:1
SPQ:1
25 / PageGoto