Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
PCB SOCKET, DOUBLE ROW, 16 PINS,
Available Stock
75
Estimated Ship Time:9-14 working days
1+$1.4796
500+$1.2285
1,000+$0.9828
1,500+$0.8354
2,000+$0.7371
- +
Ext. Price(USD):$26.63
MOQ:18
Mult:1
SPQ:1
Unshrouded Header, HDR, 1 POS, Solder, RA, Thru-Hole, Bulk
Available Stock
495
Estimated Ship Time:6-13 working days
1+$0.529
50+$0.4048
5,000+$0.2063
25,000+$0.203
- +
Ext. Price(USD):$14.28
MOQ:27
Mult:1
SPQ:1
Shrouded Header HDR 5 POS 5.08mm Solder Right Angle Thru-Hole
Available Stock
1,100
Estimated Ship Time:5-12 working days
50+$0.7566
250+$0.6475
7,500+$0.5536
10,000+$0.5245
- +
Ext. Price(USD):$37.83
MOQ:50
Mult:1
SPQ:500
PCB Mount Header Vertical Perpendicular 12 Position 2.5 mm [.098 in] Centerline Unshrouded Tin (Sn) Through Hole - Solder Power & Signal
Available Stock
2,500
Estimated Ship Time:7-9 working days
21+
150+$0.924
350+$0.88
1,300+$0.847
- +
Ext. Price(USD):$138.60
MOQ:150
Mult:1
SPQ:1
Connector Board Stacker HDR 30 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
28
Estimated Ship Time:7-9 working days
19+
19+$6.215
- +
Ext. Price(USD):$118.08
MOQ:19
Mult:19
SPQ:19
Conn Board Stacker HDR 6 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
150
Estimated Ship Time:6-13 working days
1+$1.6675
50+$1.54
5,000+$0.5929
10,000+$0.5357
- +
Ext. Price(USD):$15.00
MOQ:9
Mult:1
SPQ:1
Harwin
ECAD Model:
Conn Datamate M 16 POS 2mm Solder RA SMD Tube
Available Stock
536
Estimated Ship Time:7-9 working days
17+
25+$5.115
45+$4.906
200+$4.708
450+$4.521
- +
Ext. Price(USD):$127.87
MOQ:25
Mult:1
SPQ:1
Available Stock
680
Estimated Ship Time:6-13 working days
100+$0.1277
250+$0.1139
1,000+$0.1045
5,000+$0.0918
10,000+$0.0864
- +
Ext. Price(USD):$14.04
MOQ:110
Mult:1
SPQ:1
Available Stock
19
Estimated Ship Time:6-13 working days
1+$1.8745
50+$1.551
5,000+$0.6998
10,000+$0.6361
- +
Ext. Price(USD):$14.99
MOQ:8
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 40 POS 1mm Solder RA Side Entry SMD/TH T/R
Available Stock
1,771
Estimated Ship Time:6-13 working days
1+$4.2205
100+$2.8296
200+$2.8296
1,000+$2.538
2,400+$2.4624
- +
Ext. Price(USD):$16.88
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
Socket Strip SKT 40 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
65
Estimated Ship Time:5-12 working days
5+$12.3424
25+$11
500+$6.9122
1,000+$6.9015
- +
Ext. Price(USD):$61.71
MOQ:5
Mult:1
SPQ:1
Unshrouded Header HDR, 40 POS, 2.54mm, Solder ST Top Entry, TH
Available Stock
10
Estimated Ship Time:6-13 working days
1+$12.5235
25+$9.8064
500+$8.0136
1,000+$7.4412
- +
Ext. Price(USD):$25.04
MOQ:2
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 4 POS 5.08mm Solder RA Side Entry Thru-Hole T/R
Available Stock
1,400
Estimated Ship Time:5-12 working days
10+$2.8175
50+$2.563
1,000+$0.6634
2,500+$0.6313
- +
Ext. Price(USD):$30.99
MOQ:11
Mult:1
SPQ:1
Conn Ultra Micro Socket Strip SKT 5Power POS 2mm Solder ST Top Entry SMD T/R
Available Stock
599
Estimated Ship Time:6-13 working days
1+$5.5775
25+$4.7304
1,150+$3.6072
2,300+$3.4884
- +
Ext. Price(USD):$16.73
MOQ:3
Mult:1
SPQ:1
Connector Board Stacker HDR 20 Pos 2mm Solder ST Top Entry SMD T/R
Available Stock
125
Estimated Ship Time:7-10 working days
21+
125+$2.662
500+$2.266
5,000+$1.298
10,000+$1.122
- +
Ext. Price(USD):$332.75
MOQ:125
Mult:125
SPQ:125
Shrouded Header 18 Pos 4.68mm Solder Right Angle Side Entry Thru-Hole
Available Stock
204
Estimated Ship Time:6-13 working days
1+$30.393
10+$25.3584
25+$24.7644
100+$21.276
280+$20.142
- +
Ext. Price(USD):$30.39
MOQ:1
Mult:1
SPQ:1
Molex
Package:SMD,P=0.4mm
ECAD Model:
0.4 FLOATING BTB REC 50CKT
Available Stock
10,518
Estimated Ship Time:9-14 working days
1+$4.3308
10+$3.6828
250+$2.9339
500+$2.7942
- +
Ext. Price(USD):$30.31
MOQ:7
Mult:1
SPQ:1
Lumberg
ECAD Model:
Lumberg Minimodul Series Wire-to-Board Connector, 2.5mm Pitch 14-Pin Single Row Right Angle TH
Available Stock
1,130
Estimated Ship Time:5-10 working days
10+$0.944
70+$0.4387
- +
Ext. Price(USD):$9.44
MOQ:10
Mult:10
Unshrouded Header, 30 POS, 2mm Pitch, Solder, ST, Top Entry, TH
Available Stock
13
Estimated Ship Time:6-13 working days
1+$8.234
10+$7.458
1,000+$4.8708
2,000+$4.2876
- +
Ext. Price(USD):$16.46
MOQ:2
Mult:1
SPQ:1
Conn Board Stacker HDR 50 POS 1.27mm Solder ST Top Entry SMD FLEX STACK™ Tube
Available Stock
22
Estimated Ship Time:6-13 working days
1+$9.5105
10+$8.404
1,008+$4.5792
2,016+$3.8448
- +
Ext. Price(USD):$19.02
MOQ:2
Mult:1
SPQ:1
Shrouded Header, HDR, 20-Pos, 2mm, Solder, ST, SMD, Tube
Available Stock
27
Estimated Ship Time:6-13 working days
1+$4.6345
46+$3.0132
1,012+$2.4192
2,001+$2.2896
- +
Ext. Price(USD):$18.53
MOQ:4
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 26 POS 2.54mm Solder RA Side Entry Thru-Hole Tube
Available Stock
19
Estimated Ship Time:6-13 working days
1+$6.095
60+$4.8816
510+$3.942
1,005+$3.726
- +
Ext. Price(USD):$18.28
MOQ:3
Mult:1
SPQ:1
Shrouded Header (4 Sides) HDR 30 POS 0.8mm Solder ST Top Entry SMD T/R
Available Stock
122
Estimated Ship Time:6-13 working days
1+$13.7655
25+$11.1996
600+$6.156
1,200+$5.886
- +
Ext. Price(USD):$27.53
MOQ:2
Mult:1
SPQ:1
Samtec
ECAD Model:
IDC Connector SKT 8 POS 2.54mm IDT RA Cable Mount Tube
Available Stock
58
Estimated Ship Time:6-13 working days
1+$2.829
117+$2.2896
507+$2.106
1,014+$2.0628
2,028+$1.9008
- +
Ext. Price(USD):$14.14
MOQ:5
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, HDR, 12 Pos, 2.54mm Pitch, Solder, ST, Top Entry, Thru-Hole, Tube
Available Stock
36
Estimated Ship Time:6-13 working days
1+$7.406
54+$6.426
108+$6.2316
504+$5.3136
1,008+$5.0328
- +
Ext. Price(USD):$14.81
MOQ:2
Mult:1
SPQ:1
25 / PageGoto