Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Connector HDR 4 Pos 5mm Solder Straight Thru-Hole Box
Available Stock
2,941
Estimated Ship Time:6-13 working days
25+$0.4083
50+$0.3669
1,200+$0.2387
5,100+$0.2257
- +
Ext. Price(USD):$14.29
MOQ:35
Mult:1
SPQ:1
Shrouded Header (4 Sides), HDR 40 POS, 1.27mm Pitch, Solder, ST, TH, Tube
Available Stock
23
Estimated Ship Time:6-13 working days
1+$19.941
10+$18.2628
259+$12.2904
518+$10.4976
- +
Ext. Price(USD):$19.94
MOQ:1
Mult:1
SPQ:1
Shrouded Header (4 Sides), HDR, 18 POS, 4.68mm, Solder, ST Top Entry, Thru-Hole
Available Stock
210
Estimated Ship Time:6-13 working days
1+$25.116
10+$20.466
100+$17.0424
210+$16.5456
- +
Ext. Price(USD):$25.11
MOQ:1
Mult:1
SPQ:1
Headers and PCB Receptacles, Micro Connectors
Available Stock
4
Estimated Ship Time:6-13 working days
1+$892.5444
10+$811.8576
- +
Ext. Price(USD):$892.54
MOQ:1
Mult:1
SPQ:1
Unshrouded Header HDR 4 Pos 3.96mm Solder Straight Thru-Hole Bulk
Available Stock
607
Estimated Ship Time:6-13 working days
1+$1.794
50+$1.529
5,000+$0.6998
10,000+$0.6782
- +
Ext. Price(USD):$14.35
MOQ:8
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 2Power/16Signal POS 1.88mm/2mm Solder ST Top Entry Thru-Hole PowerStrip™ Tray
Available Stock
277
Estimated Ship Time:6-13 working days
1+$6.072
504+$4.8276
1,008+$4.7304
- +
Ext. Price(USD):$18.21
MOQ:3
Mult:1
SPQ:1
Samtec
ECAD Model:
IDC Connector M 16 POS 2.54mm IDT RA Cable Mount Tube
Available Stock
55
Estimated Ship Time:6-13 working days
1+$3.4615
23+$3.3
1,012+$2.3544
2,507+$2.2248
- +
Ext. Price(USD):$17.30
MOQ:5
Mult:1
SPQ:1
Surface Mount Pin
Available Stock
849
Estimated Ship Time:6-13 working days
10+$0.9258
25+$0.8464
100+$0.7304
250+$0.6545
1,000+$0.4126
- +
Ext. Price(USD):$14.81
MOQ:16
Mult:1
SPQ:1
Conn Wire-to-Board HDR 4 POS 5mm Solder RA Side Entry Thru-Hole Box
Available Stock
45
Estimated Ship Time:6-13 working days
25+$0.4175
50+$0.3761
1,200+$0.2452
5,100+$0.2311
- +
Ext. Price(USD):$14.19
MOQ:34
Mult:1
SPQ:1
RS PRO
ECAD Model:
RS PRO 2.54mm Pitch 16-Pin Header, Straight, TH
Available Stock
518
Estimated Ship Time:5-10 working days
1+$3.2503
25+$3.1611
75+$3.0591
200+$2.9954
1,000+$2.46
- +
Ext. Price(USD):$6.50
MOQ:2
Mult:1
Board to Board Connector PL 40 POS 1.27mm Solder ST Thru-Hole
Available Stock
104
Estimated Ship Time:9-14 working days
1+$5.7348
13+$4.7811
1,001+$3.5187
2,509+$3.298
- +
Ext. Price(USD):$28.67
MOQ:5
Mult:1
SPQ:1
Conn Socket Strip SKT 2 POS 5.08mm Solder ST Thru-Hole Tube
Available Stock
90
Estimated Ship Time:6-13 working days
1+$2.7025
55+$2.1708
2,035+$1.3932
5,005+$1.2852
- +
Ext. Price(USD):$16.21
MOQ:6
Mult:1
SPQ:1
Wire-to-Board Connector Receptacle 50 Pos 1.27mm Solder Straight Thru-Hole
Available Stock
144
Estimated Ship Time:9-14 working days
1+$218.5704
10+$214.1964
50+$209.9196
100+$205.7184
500+$201.6036
- +
Ext. Price(USD):$218.57
MOQ:1
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 10 POS 5mm Solder ST Top Entry Thru-Hole
Available Stock
9
Estimated Ship Time:9-14 working days
1+$3.7476
10+$2.6719
1,000+$1.568
5,000+$1.4352
- +
Ext. Price(USD):$26.23
MOQ:7
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 60 POS 0.8mm Solder ST Top Entry SMD T/R
Available Stock
365
Estimated Ship Time:6-13 working days
1+$20.677
10+$17.5068
375+$12.474
750+$11.3292
- +
Ext. Price(USD):$20.67
MOQ:1
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR 2 POS 2.54mm Solder Straight Top Entry Thru-Hole Bulk
Available Stock
21
Estimated Ship Time:6-13 working days
1+$1.7595
50+$1.397
2,000+$0.9839
5,000+$0.9212
- +
Ext. Price(USD):$14.07
MOQ:8
Mult:1
SPQ:1
Unshrouded Header, HDR, 10-Pos, 2.54mm, Solder, ST, Thru-Hole
Available Stock
300
Estimated Ship Time:6-13 working days
1+$0.7475
50+$0.704
5,000+$0.3326
10,000+$0.2689
- +
Ext. Price(USD):$14.20
MOQ:19
Mult:1
SPQ:1
Box Header, Double Row, Vertical, TH, 2.54mm Pitch
Available Stock
11,917
Estimated Ship Time:6-12 working days
100+$0.2128
200+$0.2038
- +
Ext. Price(USD):$25.11
MOQ:118
Mult:1
.5FHP08H, 440, B, GIG, 08/SN, HT
Available Stock
232
Estimated Ship Time:7-10 working days
22+
3+$47.322
- +
Ext. Price(USD):$141.96
MOQ:3
Mult:1
SPQ:1
Weidmuller 2.5mm Pitch 4-Pin Pluggable Terminal Block Receptacle
Available Stock
61
Estimated Ship Time:6-13 working days
1+$2.254
10+$2.001
1,000+$1.134
2,500+$1.0627
- +
Ext. Price(USD):$15.77
MOQ:7
Mult:1
SPQ:1
Conn Socket Strip SKT 3Power/30Signal POS 5.08mm/2mm Solder ST Thru-Hole Tube
Available Stock
4
Estimated Ship Time:6-13 working days
1+$8.372
12+$7.843
504+$5.5296
1,008+$5.3892
- +
Ext. Price(USD):$16.74
MOQ:2
Mult:1
SPQ:1
Terminal Strip .100" Pitch Press-Fit
Available Stock
39
Estimated Ship Time:7-9 working days
23+
13+$10.065
26+$9.515
1,001+$5.368
2,002+$3.916
- +
Ext. Price(USD):$130.84
MOQ:13
Mult:13
SPQ:13
Pancon
ECAD Model:
IDC Connector F 11 POS 2.54mm IDT RA Cable Mount Bag
Available Stock
3,708
Estimated Ship Time:5-12 working days
100+$1.045
300+$0.8338
10,000+$0.566
15,000+$0.5585
- +
Ext. Price(USD):$104.50
MOQ:100
Mult:100
SPQ:100
Conn Micro Socket Strip SKT 20 POS 1mm Solder ST Bottom Entry SMD Bulk
Available Stock
42
Estimated Ship Time:5-12 working days
5+$4.6575
50+$3.993
2,500+$2.3647
5,000+$1.6478
- +
Ext. Price(USD):$32.60
MOQ:7
Mult:1
SPQ:1
Headers and PCB Receptacles, Micro Connectors
Available Stock
10
Estimated Ship Time:7-9 working days
17+
1+$96.569
3+$94.787
6+$92.994
- +
Ext. Price(USD):$96.56
MOQ:1
Mult:1
SPQ:1
25 / PageGoto