Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Board to Board Receptacle AMPMODU 2mm
Available Stock
1,660
Estimated Ship Time:5-12 working days
28+$2.24
112+$2.123
2,520+$1.8725
5,012+$1.712
- +
Ext. Price(USD):$62.72
MOQ:28
Mult:28
SPQ:28
Conn Board Stacker HDR 6 POS 2mm Solder ST Top Entry SMD Bulk
Available Stock
120
Estimated Ship Time:6-13 working days
1+$1.679
50+$1.287
5,000+$0.8251
10,000+$0.7592
- +
Ext. Price(USD):$15.11
MOQ:9
Mult:1
SPQ:1
Samtec
ECAD Model:
IC & Device Socket .100" Low Profile Double Row Screw Machine Socket Strip
Available Stock
6
Estimated Ship Time:6-13 working days
1+$17.7445
11+$14.9688
506+$9.0288
1,001+$7.3224
- +
Ext. Price(USD):$17.74
MOQ:1
Mult:1
SPQ:1
Conn IDC Connector SKT 50 POS 2.54mm IDT RA Cable Mount
Available Stock
608
Estimated Ship Time:9-12 working days
50+$0.4002
- +
Ext. Price(USD):$36.01
MOQ:90
Mult:10
Available Stock
2,875
Estimated Ship Time:6-13 working days
1+$3.2545
10+$2.827
1,000+$1.8468
3,000+$1.7064
- +
Ext. Price(USD):$16.27
MOQ:5
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Available Stock
4,500
Estimated Ship Time:6-13 working days
25+$0.3795
100+$0.3201
3,000+$0.216
5,000+$0.2041
- +
Ext. Price(USD):$14.04
MOQ:37
Mult:1
SPQ:1
Samtec
ECAD Model:
Samtec HPM Series 5.08mm Pitch 4-Pin Single Row Header Right Angle
Available Stock
85
Estimated Ship Time:6-13 working days
1+$1.587
100+$1.2636
5,000+$0.7463
10,000+$0.6869
- +
Ext. Price(USD):$14.28
MOQ:9
Mult:1
SPQ:1
Shrouded Header 18 Pos 4.68mm Solder Right Angle Side Entry Thru-Hole
Available Stock
132
Estimated Ship Time:6-13 working days
1+$33.099
10+$28.7388
100+$22.8636
280+$22.8528
- +
Ext. Price(USD):$33.09
MOQ:1
Mult:1
SPQ:1
Conn Board Stacker HDR 26 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
55
Estimated Ship Time:7-9 working days
20+
1+$4.488
25+$4.202
2,500+$1.782
5,000+$1.375
- +
Ext. Price(USD):$31.41
MOQ:7
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Unshrouded Header HDR 34 POS 2mm Solder ST Top Entry SMD TIGER EYE™
Available Stock
177
Estimated Ship Time:7-9 working days
16+
20+$5.874
45+$5.643
- +
Ext. Price(USD):$117.48
MOQ:20
Mult:1
SPQ:1
Available Stock
18
Estimated Ship Time:6-13 working days
1+$6.394
19+$5.39
513+$4.752
1,007+$4.5144
- +
Ext. Price(USD):$19.18
MOQ:3
Mult:1
SPQ:1
8W, 1.00MM PITCH PIN HDR, SIL, S
Available Stock
1,375
Estimated Ship Time:9-14 working days
1+$1.2636
75+$0.9328
5,025+$0.6933
10,050+$0.6602
- +
Ext. Price(USD):$26.53
MOQ:21
Mult:1
SPQ:1
Available Stock
330
Estimated Ship Time:5-12 working days
2+$10.9365
25+$3.9984
500+$2.568
1,000+$2.4396
- +
Ext. Price(USD):$32.80
MOQ:3
Mult:1
SPQ:50
Conn Socket Strip SKT 12 POS 2.54mm Solder RA Side Entry SMD Tube
Available Stock
60
Estimated Ship Time:6-13 working days
1+$5.0255
35+$4.7088
1,015+$3.2292
2,030+$3.0996
- +
Ext. Price(USD):$15.07
MOQ:3
Mult:1
SPQ:1
WAGO
ECAD Model:
Pre-order
10,000
Factory Lead Time:4-5 weeks
100+$0.5627
500+$0.5533
1,000+$0.5393
10,000+$0.5299
- +
Ext. Price(USD):$56.27
MOQ:100
Mult:100
SPQ:100
Samtec TSW Series, 2.54mm Pitch, 100-Pin Dual Row Header, Right Angle
Available Stock
30
Estimated Ship Time:6-13 working days
1+$6.5205
10+$6.149
1,000+$4.4064
2,000+$4.3092
- +
Ext. Price(USD):$19.56
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Unsealed Header Right Angle
Available Stock
748
Estimated Ship Time:7-9 working days
20+
130+$2.046
390+$1.958
- +
Ext. Price(USD):$265.98
MOQ:130
Mult:130
SPQ:130
Available Stock
17
Estimated Ship Time:6-13 working days
1+$4.4965
25+$3.938
1,026+$2.7216
2,508+$2.4408
- +
Ext. Price(USD):$17.98
MOQ:4
Mult:1
SPQ:1
Conn Board Stacker HDR 10 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
85
Estimated Ship Time:6-13 working days
1+$2.5415
50+$2.2788
2,000+$1.2636
5,000+$1.134
- +
Ext. Price(USD):$15.24
MOQ:6
Mult:1
SPQ:1
Conn Socket Strip SKT 14 POS 2mm Solder ST Thru-Hole Tube
Available Stock
10
Estimated Ship Time:9-14 working days
1+$3.9096
25+$3.5372
50+$3.2864
100+$3.1298
500+$3.0335
- +
Ext. Price(USD):$27.36
MOQ:7
Mult:1
SPQ:1
IDC Connector F 64 POS 2.54mm IDT RA Cable Mount
Available Stock
4,848
Estimated Ship Time:5-12 working days
27+$3.5616
270+$3.3277
4,050+$3.2742
5,400+$3.2635
- +
Ext. Price(USD):$96.16
MOQ:27
Mult:27
SPQ:27
Available Stock
3,934
Estimated Ship Time:5-12 working days
100+$1.364
300+$1.331
7,500+$1.1663
10,000+$1.1021
- +
Ext. Price(USD):$136.40
MOQ:100
Mult:100
SPQ:100
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Available Stock
1,400
Estimated Ship Time:5-12 working days
500+$0.4643
1,000+$0.4448
15,000+$0.3887
25,000+$0.385
- +
Ext. Price(USD):$232.15
MOQ:500
Mult:500
SPQ:500
Amphenol T821 Series, 2.54mm Pitch, 6-Pin Dual Row Header, Wire-to-Board Connector, Right Angle, TH
Available Stock
168
Estimated Ship Time:5-10 working days
1+$1.5168
10+$1.4786
100+$1.4531
500+$1.4148
1,000+$1.3766
- +
Ext. Price(USD):$7.58
MOQ:5
Mult:1
Samtec
ECAD Model:
Unshrouded Header, HDR 5 POS, 2.54mm, Solder ST Top Entry, Thru-Hole, Tube
Available Stock
80
Estimated Ship Time:6-13 working days
1+$4.2895
45+$4.0176
1,035+$2.7108
2,025+$2.4516
- +
Ext. Price(USD):$17.15
MOQ:4
Mult:1
SPQ:1
25 / PageGoto