Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
CONN RCPT 4POS 0.1 GOLD SMD
Available Stock
850
Estimated Ship Time:7-10 working days
20+
850+$1.254
1,700+$1.155
2,550+$0.99
5,100+$0.726
10,200+$0.517
- +
Ext. Price(USD):$1,065.90
MOQ:850
Mult:850
SPQ:850
Unshrouded Header Connector HDR 32 POS 2.54mm Solder RA Side Entry Thru-Hole Bulk
Available Stock
5
Estimated Ship Time:6-13 working days
1+$5.405
25+$4.7304
500+$4.0608
1,000+$3.8124
- +
Ext. Price(USD):$16.21
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Unshrouded Header HDR 52 POS 2.54mm Solder ST Thru-Hole C-Grid III™ Tray
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Molex
ECAD Model:
Connector Header Through Hole Right Angle 8 position 0.138 (3.50mm)
Available Stock
462
Estimated Ship Time:7-9 working days
23+
45+$2.607
150+$2.563
250+$2.519
450+$2.475
- +
Ext. Price(USD):$117.31
MOQ:45
Mult:1
SPQ:1
JST 1P Pin Header Board-to-Board Connector, XH Series, Straight, TH
Available Stock
780
Estimated Ship Time:5-10 working days
10+$0.2001
50+$0.1963
100+$0.1912
250+$0.1861
500+$0.1823
- +
Ext. Price(USD):$8.00
MOQ:40
Mult:10
WAGO
ECAD Model:
Available Stock
201
Estimated Ship Time:5-12 working days
25+$1.564
250+$1.463
7,500+$1.284
10,000+$1.2626
- +
Ext. Price(USD):$39.10
MOQ:25
Mult:1
SPQ:1
Shrouded Header (4 Sides) HDR 10 POS 1.27mm Solder ST SMD Tube
Available Stock
17
Estimated Ship Time:6-13 working days
1+$7.866
25+$7.1928
2,537+$2.4624
5,015+$1.6416
- +
Ext. Price(USD):$15.73
MOQ:2
Mult:1
SPQ:1
Conn Socket Strip SKT 10 POS 2mm Solder ST Thru-Hole Tube
Available Stock
7
Estimated Ship Time:6-13 working days
1+$8.4065
23+$7.7436
506+$6.0264
1,012+$5.6484
- +
Ext. Price(USD):$16.81
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
3CCT R-POWER 7% GF GWT NO LATCH
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Unshrouded Header, 64 POS 2.54mm Solder ST Top Entry TH Bulk
Available Stock
87
Estimated Ship Time:6-13 working days
1+$4.531
25+$4.224
1,000+$2.9808
2,500+$2.6784
- +
Ext. Price(USD):$18.12
MOQ:4
Mult:1
SPQ:1
Wire-to-Board Connector, 6 Pos, 1.27mm, Solder, Straight, Thru-Hole, T/R
Available Stock
1,059
Estimated Ship Time:7-9 working days
11+
286+$0.385
- +
Ext. Price(USD):$110.11
MOQ:286
Mult:1
SPQ:1
Ejector Header HDR 14-Pin 2.54mm Solder RA Thru-Hole Tray
Available Stock
1,589
Estimated Ship Time:9-14 working days
1+$1.8792
210+$1.7539
420+$1.2528
840+$0.877
- +
Ext. Price(USD):$26.30
MOQ:14
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Wire to Board HDR 12 POS 2.5mm Solder ST Thru-Hole Automotive Tray
Available Stock
570
Estimated Ship Time:7-9 working days
18+
150+$0.396
- +
Ext. Price(USD):$59.40
MOQ:150
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header, 8 Pos, 2.54mm, Solder, ST, Top Entry, Thru-Hole, Bulk
Available Stock
63
Estimated Ship Time:6-13 working days
1+$3.841
50+$2.9376
1,000+$2.3976
2,000+$2.322
- +
Ext. Price(USD):$15.36
MOQ:4
Mult:1
SPQ:1
Available Stock
25
Estimated Ship Time:5-12 working days
5+$5.3015
25+$4.62
2,500+$2.0972
5,000+$2.0758
- +
Ext. Price(USD):$31.80
MOQ:6
Mult:1
SPQ:1
Conn Board Stacker HDR 10POS 2mm Solder ST Top Entry SMD Tube
Available Stock
46
Estimated Ship Time:6-13 working days
1+$3.427
56+$2.5596
504+$2.2788
1,008+$2.214
2,016+$2.1276
- +
Ext. Price(USD):$17.13
MOQ:5
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Header Receptacle, 8Power/24Signal POS, 6.35mm/2.54mm Press Fit ST Thru-Hole, 88 Terminal, 1 Port Tray
Available Stock
166
Estimated Ship Time:7-9 working days
10+
13+$8.734
43+$8.371
- +
Ext. Price(USD):$113.54
MOQ:13
Mult:1
SPQ:1
Available Stock
74
Estimated Ship Time:5-12 working days
1+$1,531.0416
5+$1,527.2217
24+$529.6393
32+$519.0463
- +
Ext. Price(USD):$1,531.04
MOQ:1
Mult:1
SPQ:4
CONNECTOR, HEADER, 10POS, 2ROW, 2.5MM; Pitch Spacing:2.54mm; No. of Contacts:10Contacts; Gender:Header; Product Range:-; Contact Termination Type:Through Hole; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; Con
Available Stock
842
Estimated Ship Time:6-12 working days
50+$0.2692
100+$0.2551
200+$0.2436
- +
Ext. Price(USD):$25.03
MOQ:93
Mult:1
Military Rectangular PCB Connect
Available Stock
26
Estimated Ship Time:9-14 working days
1+$624.618
100+$612.1224
500+$599.886
1,000+$587.8872
5,000+$576.126
- +
Ext. Price(USD):$624.61
MOQ:1
Mult:1
SPQ:1
Conn Unshrouded Header HDR 10 POS 5.08mm Solder RA Side Entry Thru-Hole Bulk
Available Stock
117
Estimated Ship Time:6-13 working days
1+$2.1505
50+$2.035
2,000+$1.2528
5,000+$1.1448
- +
Ext. Price(USD):$15.05
MOQ:7
Mult:1
SPQ:1
IDC Socket
Available Stock
720
Estimated Ship Time:7-10 working days
23+
141+$0.781
551+$0.748
- +
Ext. Price(USD):$110.12
MOQ:141
Mult:1
SPQ:1
Shrouded Header, 8 Pos, 5mm Pitch, Solder, Straight, Thru-Hole
Available Stock
32
Estimated Ship Time:5-12 working days
25+$2.0217
250+$1.276
7,500+$1.1246
10,000+$1.1192
- +
Ext. Price(USD):$50.54
MOQ:25
Mult:1
SPQ:250
Q Strip® High-Speed Ground Plane Terminal Strip 0.50mm
Available Stock
25
Estimated Ship Time:6-13 working days
1+$13.5585
25+$11.9556
270+$9.7524
540+$9.3204
- +
Ext. Price(USD):$27.11
MOQ:2
Mult:1
SPQ:1
Amphenol T816 Series Wire-to-Board Connector, 2.54mm Pitch, 8-Pin Dual Row, Right Angle, TH
Available Stock
2,483
Estimated Ship Time:5-10 working days
1,000+$1.105
5,000+$0.9945
- +
Ext. Price(USD):$1,105.00
MOQ:1,000
Mult:1,000
25 / PageGoto