Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Plug Assembly .260 Vertical .025 Cl Gull Wing Leads Pocket Tape Packaged Mictor
Available Stock
7,308
Estimated Ship Time:7-9 working days
24+
3+$48.136
8+$45.837
32+$43.758
79+$41.855
236+$40.106
- +
Ext. Price(USD):$144.40
MOQ:3
Mult:1
SPQ:1
Wire-to-Board Connector F 6 POS 2.54mm Solder ST SMD T/R
Available Stock
1,600
Estimated Ship Time:7-9 working days
19+
286+$0.385
1,299+$0.363
- +
Ext. Price(USD):$110.11
MOQ:286
Mult:1
SPQ:1
RS PRO
ECAD Model:
RS PRO Pin Header, 2.54mm Pitch, 20 Pos, Dual Row, Straight, TH
Available Stock
1,835
Estimated Ship Time:5-10 working days
1+$5.1622
25+$5.0475
75+$4.8945
200+$4.7798
1,000+$3.9258
- +
Ext. Price(USD):$10.32
MOQ:2
Mult:1
WAGO
ECAD Model:
Male Header PCBs Straight Pin 0.8×0.8mm 12x2-Pole Orientation Nose 3.5mm Pitch Vertical Mount
Pre-order
2,500
Factory Lead Time:4-5 weeks
25+$9.1508
125+$8.9983
250+$8.7695
2,500+$8.617
- +
Ext. Price(USD):$228.77
MOQ:25
Mult:25
SPQ:25
Conn Unshrouded Header HDR 24 POS 5mm Solder ST Top Entry Thru-Hole
Available Stock
500
Estimated Ship Time:5-12 working days
2+$8.579
25+$3.136
500+$2.0116
1,000+$1.9153
- +
Ext. Price(USD):$34.31
MOQ:4
Mult:1
SPQ:50
Conn Socket Strip SKT 16 POS 1.27mm Solder ST Top Entry SMD TIGER CLAW™ Tube
Available Stock
5
Estimated Ship Time:6-13 working days
1+$3.519
25+$3.157
55+$2.7216
110+$2.7108
- +
Ext. Price(USD):$14.07
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 3 POS 7mm Solder RA Thru-Hole Tray
Available Stock
1,719
Estimated Ship Time:9-14 working days
10+$0.851
100+$0.7227
5,000+$0.5483
10,000+$0.5222
- +
Ext. Price(USD):$26.38
MOQ:31
Mult:1
SPQ:1
PCB SOCKET, DOUBLE ROW, 6 PIN, S
Available Stock
500
Estimated Ship Time:9-14 working days
1+$0.7776
1,000+$0.7387
5,000+$0.6221
10,000+$0.4666
- +
Ext. Price(USD):$26.43
MOQ:34
Mult:1
SPQ:1
Available Stock
35
Estimated Ship Time:6-13 working days
1+$7.0495
25+$5.9832
105+$5.1516
525+$4.7628
1,015+$4.4064
- +
Ext. Price(USD):$14.09
MOQ:2
Mult:1
SPQ:1
Conn Unshrouded Header HDR 9 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
144
Estimated Ship Time:6-13 working days
1+$1.472
50+$1.386
5,000+$0.6728
10,000+$0.5152
- +
Ext. Price(USD):$14.72
MOQ:10
Mult:1
SPQ:1
WAGO
ECAD Model:
Male Connector, Angled Solder Pins, 11-Pole
Available Stock
191
Estimated Ship Time:4-7 working days
100+$1.4785
500+$1.4539
1,000+$1.4169
10,000+$1.3922
- +
Ext. Price(USD):$147.85
MOQ:100
Mult:100
SPQ:100
VARIABLE POST HEIGHT HEADER STRI
Available Stock
516
Estimated Ship Time:9-14 working days
10+$28.6632
20+$28.0908
50+$27.5292
100+$26.9784
500+$26.4384
- +
Ext. Price(USD):$286.63
MOQ:10
Mult:10
SPQ:1
0.100 inch AMPMODU Headers
Available Stock
20
Estimated Ship Time:7-9 working days
15+
19+$5.896
- +
Ext. Price(USD):$112.02
MOQ:19
Mult:1
SPQ:1
Pancon
ECAD Model:
Wire to Board Connector Header, 11 Pos, 3.96mm, Through-Hole
Available Stock
2,250
Estimated Ship Time:5-12 working days
100+$0.7001
300+$0.6151
10,000+$0.4607
15,000+$0.4579
- +
Ext. Price(USD):$70.01
MOQ:100
Mult:100
SPQ:100
Conn Socket Strip SKT 2 POS Solder ST Thru-Hole 16 Terminal 1 Port
Available Stock
79
Estimated Ship Time:6-13 working days
1+$6.969
25+$5.9724
80+$4.9248
560+$4.5576
1,040+$4.1148
- +
Ext. Price(USD):$20.90
MOQ:3
Mult:1
SPQ:1
Lumberg
ECAD Model:
Conn Shrouded Header HDR 10 POS 5mm Solder ST Thru-Hole Bulk
Available Stock
1,496
Estimated Ship Time:9-14 working days
10+$0.8273
250+$0.6592
5,000+$0.5336
10,000+$0.5081
- +
Ext. Price(USD):$26.47
MOQ:32
Mult:1
SPQ:1
Molex
ECAD Model:
1.50mm Pitch CLIK Mate PCB Receptacle Single Row SMD Right Angle Tin Plated Positive Lock 5 Circuits Green
Available Stock
51
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Conn Unshrouded Header HDR 8 POS 5.08mm Solder RA Thru-Hole Bulk
Available Stock
75
Estimated Ship Time:6-13 working days
1+$3.795
50+$3.1968
1,000+$2.376
2,000+$2.2572
- +
Ext. Price(USD):$15.18
MOQ:4
Mult:1
SPQ:1
Unshrouded Header Connector
Available Stock
1,300
Estimated Ship Time:5-12 working days
100+$0.9218
300+$0.8899
7,500+$0.7629
10,000+$0.6869
- +
Ext. Price(USD):$92.18
MOQ:100
Mult:100
SPQ:100
Molex
ECAD Model:
Conn IDC Connector F 9 POS 3.96mm IDT RA Cable Mount KK® Bag
Available Stock
1,282
Estimated Ship Time:7-9 working days
10+
109+$0.539
- +
Ext. Price(USD):$58.75
MOQ:109
Mult:1
SPQ:1
Connector Header Through Hole 8 position 0.118 (3.00mm)
Available Stock
750
Estimated Ship Time:7-9 working days
22+
148+$0.748
1,688+$0.748
3,375+$0.66
- +
Ext. Price(USD):$110.70
MOQ:148
Mult:1
SPQ:1
Elevated Shrouded Header HDR 20 POS 2mm Solder ST Thru-Hole
Available Stock
50
Estimated Ship Time:6-13 working days
1+$6.5205
25+$5.886
1,000+$3.78
2,500+$3.1752
- +
Ext. Price(USD):$19.56
MOQ:3
Mult:1
SPQ:1
WAGO
ECAD Model:
Pre-order
100,000
Factory Lead Time:4-5 weeks
1,000+$0.7835
5,000+$0.7705
10,000+$0.7509
100,000+$0.7378
- +
Ext. Price(USD):$783.50
MOQ:1,000
Mult:1,000
SPQ:1,000
Conn Board Stacker HDR 16 POS 1.27mm Solder ST Top Entry SMD FLEX STACK™
Available Stock
4
Estimated Ship Time:6-13 working days
1+$4.508
25+$3.74
1,026+$2.7
2,508+$2.4948
- +
Ext. Price(USD):$18.03
MOQ:4
Mult:1
SPQ:1
PCB SOCKET, SINGLE ROW, 4 PIN, S
Available Stock
335
Estimated Ship Time:9-14 working days
1+$1.2636
1,000+$1.2004
5,000+$1.0109
10,000+$0.7582
- +
Ext. Price(USD):$26.53
MOQ:21
Mult:1
SPQ:1
25 / PageGoto