Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 20 Pos, 4.2mm Pitch, Solder, RA Side Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.5024
- +
Ext. Price(USD):$2,028.24
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3318
- +
Ext. Price(USD):$1,198.62
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Unshrouded Header HDR 36 POS 2.54mm Solder ST Thru-Hole C-Grid® Tray
Pre-order
18,000
Factory Lead Time:22-26 weeks
180+$3.6875
360+$3.6125
720+$3.4125
1,000+$2.85
2,500+$2.475
- +
Ext. Price(USD):$663.75
MOQ:180
Mult:180
SPQ:180
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$9.5734
- +
Ext. Price(USD):$8,616.06
MOQ:900
Mult:300
SPQ:300
Conn Unshrouded Header HDR 18 POS 2.5mm Solder ST Thru-Hole
Available Stock
250
Estimated Ship Time:6-7 working days
21+
250+$0.5987
- +
Ext. Price(USD):$149.67
MOQ:250
Mult:250
JST
ECAD Model:
Wire-to-Board Connector HDR 6POS 5mm CRMP TH
Pre-order
20,000
Factory Lead Time:18-22 weeks
26+
2,000+$0.0606
6,000+$0.0596
10,000+$0.0581
- +
Ext. Price(USD):$121.20
MOQ:2,000
Mult:2,000
SPQ:2,000
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 5 POS 2mm Solder RA Side Entry Thru-Hole Box
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.2421
27,000+$0.2381
45,000+$0.232
- +
Ext. Price(USD):$2,178.90
MOQ:9,000
Mult:9,000
SPQ:9,000
Wire to Board Connector HDR 3POS 3.96mm Solder ST Thru-Hole Box
Pre-order
120,000
Factory Lead Time:16-18 weeks
12,000+$0.0714
- +
Ext. Price(USD):$856.80
MOQ:12,000
Mult:12,000
Wire-to-Board HDR 24 Pos 4.2mm Solder RA Side Entry TH Tray
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.6696
- +
Ext. Price(USD):$1,051.84
MOQ:630
Mult:630
SPQ:210
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$9.159
- +
Ext. Price(USD):$8,243.10
MOQ:900
Mult:900
SPQ:300
SMT Type Shrouded Header
Available Stock
984
Estimated Ship Time:6-7 working days
20+$0.7461
- +
Ext. Price(USD):$14.92
MOQ:20
Mult:20
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1518
- +
Ext. Price(USD):$2,904.93
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 24 Pos 4.2mm Solder ST Top Entry TH
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.7358
- +
Ext. Price(USD):$1,093.55
MOQ:630
Mult:630
SPQ:315
JFA CONNECTOR J300 Series 3.81/5.08mm Pitch Disconnectable Crimp Style Connectors (Wire-to-Board/Wire-to-Wire)
Available Stock
55
Estimated Ship Time:14-17 working days
10+$3.5798
50+$2.7877
2,000+$2.2577
4,000+$2.251
- +
Ext. Price(USD):$50.11
MOQ:14
Mult:1
SPQ:1
Molex
ECAD Model:
Pre-order
670,000
Factory Lead Time:22-26 weeks
6,700+$1.0875
- +
Ext. Price(USD):$7,286.25
MOQ:6,700
Mult:6,700
SPQ:6,700
JST
ECAD Model:
Shrouded Header (4 Sides), HDR, 6 POS, 2mm Pitch, Solder, ST, Top Entry, Thru-Hole, Box
Pre-order
180,000
Factory Lead Time:18-22 weeks
26+
18,000+$0.0848
54,000+$0.0834
90,000+$0.0812
- +
Ext. Price(USD):$1,526.40
MOQ:18,000
Mult:18,000
SPQ:18,000
Conn Socket Strip SKT 5 POS 2.5mm Solder ST Top Entry Thru-Hole
Available Stock
5,010
Estimated Ship Time:6-7 working days
20+
20+$0.387
200+$0.1238
- +
Ext. Price(USD):$7.74
MOQ:20
Mult:20
JST
ECAD Model:
IDC Connector RCP 8 POS 2.5mm IDT RA Cable Mount Box
Available Stock
320
Estimated Ship Time:6-12 working days
10+$1.195
100+$1.1737
500+$1.1737
1,000+$1.1524
2,500+$1.1524
- +
Ext. Price(USD):$25.09
MOQ:21
Mult:1
Wire-to-Board Connector Header 8-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$2.4808
- +
Ext. Price(USD):$4,018.89
MOQ:1,620
Mult:540
SPQ:540
Lumberg
ECAD Model:
Conn Board to Board RCP 2 POS 5mm Solder RA Thru-Hole Bulk
Available Stock
800
Estimated Ship Time:2-4 weeks
1+$0.4289
- +
Ext. Price(USD):$250.04
MOQ:583
Mult:1
Pre-order
135,000
Factory Lead Time:22-26 weeks
1,350+$5.4375
5,400+$5.075
10,350+$4.775
- +
Ext. Price(USD):$7,340.62
MOQ:1,350
Mult:1,350
SPQ:1,350
Molex
ECAD Model:
Wire-to-Board HDR 36 Pos 1.25mm Solder ST Top Entry SMD T/R
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$2.125
4,000+$1.85
10,000+$1.8125
- +
Ext. Price(USD):$3,187.50
MOQ:1,500
Mult:1,500
JST
ECAD Model:
Shrouded Header HDR 5 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
2,000
Estimated Ship Time:4-6 working days
1,000+$0.0352
- +
Ext. Price(USD):$35.20
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.5623
- +
Ext. Price(USD):$843.45
MOQ:1,500
Mult:500
SPQ:500
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$4.993
- +
Ext. Price(USD):$6,740.55
MOQ:1,350
Mult:450
SPQ:450
25 / PageGoto