Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Unshrouded Header HDR 2 POS 2mm Solder RA Thru-Hole
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.2851
- +
Ext. Price(USD):$5.70
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 2mm Solder ST Thru-Hole Tube
Pre-order
55,500
Factory Lead Time:22-26 weeks
555+$2.55
1,110+$2.4
- +
Ext. Price(USD):$1,415.25
MOQ:555
Mult:555
SPQ:555
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7573
- +
Ext. Price(USD):$1,135.95
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 5 Pos 2mm Solder RA Thru-Hole Tube
Pre-order
528,000
Factory Lead Time:22-26 weeks
5,280+$1.4
- +
Ext. Price(USD):$7,392.00
MOQ:5,280
Mult:5,280
SPQ:5,280
Molex
ECAD Model:
Pre-order
96,000
Factory Lead Time:22-26 weeks
960+$5.9625
2,000+$5.225
5,000+$5.1125
- +
Ext. Price(USD):$5,724.00
MOQ:960
Mult:960
Conn Unshrouded Header M 36 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
360
Estimated Ship Time:6-12 working days
10+$1.4449
100+$1.4191
250+$1.4191
500+$1.3933
1,000+$1.3933
- +
Ext. Price(USD):$24.56
MOQ:17
Mult:1
Shrouded Header, 4 POS, 5mm, Solder ST, Thru-Hole, Bag
Available Stock
2,485
Estimated Ship Time:5-9 working days
22+
5+$0.7872
15+$0.6206
30+$0.6103
- +
Ext. Price(USD):$3.93
MOQ:5
Mult:1
SPQ:200
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8182
- +
Ext. Price(USD):$1,104.57
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 3 POS 2mm Solder ST Thru-Hole Box
Available Stock
8,640
Estimated Ship Time:4-6 working days
480+$0.2273
- +
Ext. Price(USD):$109.10
MOQ:480
Mult:480
SPQ:480
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.5449
- +
Ext. Price(USD):$1,307.76
MOQ:2,400
Mult:1,200
SPQ:400
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.54
- +
Ext. Price(USD):$3,429.00
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.5644
- +
Ext. Price(USD):$3,461.94
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Ejector Header HDR 40 POS 2.54mm Solder ST Thru-Hole Box
Available Stock
425
Estimated Ship Time:4-6 working days
25+$2.3622
- +
Ext. Price(USD):$59.05
MOQ:25
Mult:25
SPQ:25
Pre-order
845,000
Factory Lead Time:22-26 weeks
8,450+$0.0788
16,900+$0.065
33,800+$0.055
50,000+$0.0475
100,000+$0.0438
- +
Ext. Price(USD):$665.86
MOQ:8,450
Mult:8,450
SPQ:8,450
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1403
- +
Ext. Price(USD):$1,368.36
MOQ:1,200
Mult:1,200
SPQ:400
Aptiv
ECAD Model:
ASM Conn M 0.63 Header
Available Stock
426
Estimated Ship Time:6-12 working days
1+$5.529
10+$4.8655
500+$4.7771
1,000+$4.7771
- +
Ext. Price(USD):$27.64
MOQ:5
Mult:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides), HDR, 54 POS, 2.3mm/2.54mm/2.95mm, Solder RA Thru-Hole, Stac64™ Automotive Tray
Pre-order
67,200
Factory Lead Time:22-26 weeks
672+$9.2625
1,600+$8.1125
4,000+$7.9375
- +
Ext. Price(USD):$6,224.40
MOQ:672
Mult:672
Shrouded Header HDR 12 POS 2mm Solder ST Top Entry SMD T/R
Available Stock
163
Estimated Ship Time:14-17 working days
50+$0.7617
100+$0.6528
2,000+$0.5605
4,000+$0.5594
- +
Ext. Price(USD):$50.27
MOQ:66
Mult:1
SPQ:1
JST
ECAD Model:
Shrouded Header HDR 2 POS 2mm Solder RA Side Entry Thru-Hole Box
Available Stock
16,000
Estimated Ship Time:4-6 working days
1,000+$0.0191
- +
Ext. Price(USD):$19.10
MOQ:1,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
IDC Connector RCP 10 POS 1.27mm IDT ST Top Entry Cable Mount QF-50 Tray
Available Stock
30
Estimated Ship Time:3-5 working days
08+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.4781
- +
Ext. Price(USD):$2,660.58
MOQ:1,800
Mult:1,800
SPQ:600
Shrouded Header
Pre-order
76,000
Factory Lead Time:22-26 weeks
760+$2.7125
1,140+$2.425
5,320+$2.2625
10,260+$2.1375
- +
Ext. Price(USD):$2,061.50
MOQ:760
Mult:760
SPQ:760
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7207
- +
Ext. Price(USD):$972.94
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.6389
- +
Ext. Price(USD):$1,725.03
MOQ:2,700
Mult:2,700
SPQ:900
JST
ECAD Model:
Conn Wire to Board HDR 4 POS 2.54mm ST Thru-Hole
Pre-order
180,000
Factory Lead Time:16-18 weeks
18,000+$0.1204
- +
Ext. Price(USD):$2,167.20
MOQ:18,000
Mult:18,000
25 / PageGoto