Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$4.25
500+$4.025
1,000+$3.525
2,500+$3.275
5,000+$3.125
- +
Ext. Price(USD):$1,062.50
MOQ:250
Mult:250
SPQ:250
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.9543
- +
Ext. Price(USD):$4,431.45
MOQ:1,500
Mult:1,500
SPQ:500
1.5mm Pitch Disconnectable Crimp Style Connector
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.1144
- +
Ext. Price(USD):$2.28
MOQ:20
Mult:20
JST
ECAD Model:
Conn Shrouded Header HDR 8 POS 2mm Solder ST Thru-Hole Box
Available Stock
240
Estimated Ship Time:14-17 working days
100+$0.3096
300+$0.2535
5,000+$0.1865
10,000+$0.1853
- +
Ext. Price(USD):$50.15
MOQ:162
Mult:1
SPQ:1
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.6427
- +
Ext. Price(USD):$3,567.64
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Wire-to-Board Connector, Plug, 8 Power Pos, 2mm/2.5mm Pitch, Solder RA Thru-Hole Tray
Pre-order
70,000
Factory Lead Time:22-26 weeks
700+$7.75
1,600+$6.7875
4,000+$6.6375
- +
Ext. Price(USD):$5,425.00
MOQ:700
Mult:700
Molex
ECAD Model:
Molex IDC Connector, Picoflex Series, Receptacle, 16-Pos, 2-Row, 1.27mm Pitch, Wire Mount
Available Stock
14,608
Estimated Ship Time:6-12 working days
1+$0.8881
100+$0.8289
300+$0.8141
800+$0.7993
2,000+$0.7993
- +
Ext. Price(USD):$24.86
MOQ:28
Mult:1
Wire-to-Board HDR, 2 POS, 4.2mm, RA, Thru-Hole
Pre-order
3,105,000
Factory Lead Time:15 weeks
6,210+$0.806
- +
Ext. Price(USD):$5,005.26
MOQ:6,210
Mult:6,210
SPQ:2,070
Available Stock
75
Estimated Ship Time:12-16 working days
1+$6.174
- +
Ext. Price(USD):$203.74
MOQ:33
Mult:1
JST
ECAD Model:
Conn IDC Connector F 15 POS 1.5mm IDT RA Cable Mount Box
Available Stock
16,000
Estimated Ship Time:4-6 working days
1,000+$0.0999
- +
Ext. Price(USD):$99.90
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.5076
- +
Ext. Price(USD):$1,356.84
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$3.259
- +
Ext. Price(USD):$4,888.50
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$0.9714
- +
Ext. Price(USD):$1,573.66
MOQ:1,620
Mult:540
SPQ:540
Molex
ECAD Model:
Conn Socket Strip RCP 18 POS 2.54mm Solder ST Thru-Hole Tray
Pre-order
36,300
Factory Lead Time:22-26 weeks
363+$1.3375
1,449+$1.275
- +
Ext. Price(USD):$485.51
MOQ:363
Mult:363
SPQ:363
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH
Pre-order
270,000
Factory Lead Time:15 weeks
540+$7.1865
- +
Ext. Price(USD):$3,880.71
MOQ:540
Mult:180
SPQ:180
Unshrouded Header, 34 POS, 2.54mm Pitch, Solder, Straight, Thru-Hole
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$4.8375
1,000+$4.575
5,000+$3.375
10,000+$2.6125
50,000+$2.175
- +
Ext. Price(USD):$2,418.75
MOQ:500
Mult:500
SPQ:500
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.7305
- +
Ext. Price(USD):$2,336.17
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.25
- +
Ext. Price(USD):$1,125.00
MOQ:900
Mult:900
SPQ:300
Shrouded Header (4 Sides), HDR, 6 POS, 2.5mm, Solder, ST, Top Entry, Thru-Hole, Box
Available Stock
350
Estimated Ship Time:3-5 working days
21+
1+$0.0778
200+$0.0688
400+$0.0599
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:400
Conn Unshrouded Header HDR 2 POS 5.08mm Solder ST Thru-Hole Box
Available Stock
424
Estimated Ship Time:14-17 working days
100+$0.2535
300+$0.1987
5,000+$0.1474
10,000+$0.1463
- +
Ext. Price(USD):$50.19
MOQ:198
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Wire to Board HDR 16 POS 1.27mm Solder ST Thru-Hole Picoflex® Bag
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$2.3375
4,000+$2.0375
10,000+$2
- +
Ext. Price(USD):$4,207.50
MOQ:1,800
Mult:1,800
Conn Unshrouded Header HDR 16 POS 2.54mm Solder ST Top Entry Thru-Hole BergStik® Bag
Pre-order
5,000
Factory Lead Time:10-16 weeks
24+
500+$0.7866
1,000+$0.7661
- +
Ext. Price(USD):$393.30
MOQ:500
Mult:500
SPQ:500
Conn Unshrouded Header HDR 10 POS 2.54mm Solder ST Thru-Hole Package
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$2.4
1,000+$2.2625
2,500+$2.1125
5,000+$2.0125
10,000+$1.95
- +
Ext. Price(USD):$1,200.00
MOQ:500
Mult:500
SPQ:500
JST
ECAD Model:
Conn Headers and PCB Receptacles
Available Stock
350
Estimated Ship Time:14-17 working days
100+$0.3288
300+$0.2713
5,000+$0.2011
10,000+$0.2
- +
Ext. Price(USD):$50.30
MOQ:153
Mult:1
SPQ:1
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.2465
- +
Ext. Price(USD):$1,495.80
MOQ:1,200
Mult:1,200
SPQ:400
25 / PageGoto