Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
480
Estimated Ship Time:6-7 working days
20+$0.3471
- +
Ext. Price(USD):$6.94
MOQ:20
Mult:20
Pre-order
4,275,000
Factory Lead Time:7 weeks
8,550+$4.751
- +
Ext. Price(USD):$40,621.05
MOQ:8,550
Mult:450
SPQ:450
Minitek 1.80mm WTB Connector, USCAR 2 V2 Compatible, Right Angle TH, 32-Pin Header D Coding
Pre-order
600,000
Factory Lead Time:10 weeks
1,200+$2.439
- +
Ext. Price(USD):$2,926.80
MOQ:1,200
Mult:600
SPQ:600
Wire-to-Board Connector Header 10 Pos 4.2mm Pitch Solder RA Side Entry TH
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$3.2486
- +
Ext. Price(USD):$4,093.23
MOQ:1,260
Mult:1,260
SPQ:420
Conn Shrouded Header (4 Sides) HDR 13 POS 2mm Solder ST Top Entry SMD T/R
Available Stock
13,795
Estimated Ship Time:6-7 working days
22+
20+$0.9158
500+$0.4241
- +
Ext. Price(USD):$18.31
MOQ:20
Mult:20
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6946
- +
Ext. Price(USD):$1,250.28
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Connector, 4.2mm, Right Angle Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.633
- +
Ext. Price(USD):$8,328.30
MOQ:5,100
Mult:1,700
SPQ:1,700
Molex
ECAD Model:
Conn Shrouded HDR (4 Sides) 39 POS 2.54mm Solder ST Thru-Hole C-Grid Tray
Available Stock
19
Estimated Ship Time:3-5 working days
07+
10+$0.4346
50+$0.4273
100+$0.4122
- +
Ext. Price(USD):$4.34
MOQ:10
Mult:10
SPQ:10
Conn Shrouded Header (4 Sides) HDR 12 POS 2mm Solder RA Side Entry SMD T/R
Available Stock
2,408
Estimated Ship Time:6-7 working days
24+
20+$0.8825
1,000+$0.357
- +
Ext. Price(USD):$17.65
MOQ:20
Mult:20
Board to Board Connector RCP 220Pos 0.5mm Solder ST Top Entry SMD T/R
Pre-order
160,000
Factory Lead Time:22-26 weeks
1,600+$20.025
2,500+$17.6125
5,000+$15.5375
10,000+$12.425
25,000+$10.7
- +
Ext. Price(USD):$32,040.00
MOQ:1,600
Mult:1,600
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 14 POS 2mm Solder ST Top Entry SMD Tube
Pre-order
537,600
Factory Lead Time:22-26 weeks
5,376+$1.5625
- +
Ext. Price(USD):$8,400.00
MOQ:5,376
Mult:5,376
SPQ:5,376
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
1,687,500
Factory Lead Time:15 weeks
3,375+$0.7207
- +
Ext. Price(USD):$2,432.36
MOQ:3,375
Mult:3,375
SPQ:1,125
Datamate Mix-Tek Female Vertical PC Tail Connector, Hex Socket Jackscrews, No Signal Contacts, 8 x 3.5mm PC Tail Power Contacts
Available Stock
14
Estimated Ship Time:7-12 working days
1+$48.7341
10+$46.3617
25+$43.8904
50+$41.5179
- +
Ext. Price(USD):$243.67
MOQ:5
Mult:1
SPQ:1
Conn Shrouded Header HDR 32 POS 2mm Solder RA Thru-Hole Box
Available Stock
1,800
Estimated Ship Time:6-7 working days
22+
200+$0.4836
- +
Ext. Price(USD):$96.72
MOQ:200
Mult:200
Molex
ECAD Model:
Pre-order
115,000
Factory Lead Time:22-26 weeks
1,150+$1.1
2,300+$1.0375
- +
Ext. Price(USD):$1,265.00
MOQ:1,150
Mult:1,150
SPQ:1,150
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9523
- +
Ext. Price(USD):$1,285.60
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Headers and PCB Receptacles
Available Stock
150
Estimated Ship Time:14-17 working days
100+$0.4288
300+$0.3726
4,000+$0.296
5,000+$0.296
- +
Ext. Price(USD):$50.16
MOQ:117
Mult:1
SPQ:1
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.6285
- +
Ext. Price(USD):$942.75
MOQ:1,500
Mult:1,500
SPQ:500
Pre-order
135,000
Factory Lead Time:22-26 weeks
1,350+$5.15
5,400+$4.8125
10,350+$4.5375
- +
Ext. Price(USD):$6,952.50
MOQ:1,350
Mult:1,350
SPQ:1,350
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$1.337
- +
Ext. Price(USD):$3,850.56
MOQ:2,880
Mult:2,880
SPQ:2,880
Molex
ECAD Model:
Conn Socket Strip RCP 16 POS 2.54mm Solder ST Bottom Entry TH
Pre-order
32,400
Factory Lead Time:22-26 weeks
324+$1.6125
1,296+$1.5375
- +
Ext. Price(USD):$522.45
MOQ:324
Mult:324
SPQ:324
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Header, Dual Row, Right Angle, SMT
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$1.6051
- +
Ext. Price(USD):$4,815.30
MOQ:3,000
Mult:3,000
SPQ:600
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.9035
- +
Ext. Price(USD):$813.15
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Shrouded Header HDR 2 POS 2mm Solder RA Side Entry Thru-Hole Box
Available Stock
4,000
Estimated Ship Time:4-6 working days
1,000+$0.0196
- +
Ext. Price(USD):$19.60
MOQ:1,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 5 Pos 2mm Solder Straight Thru-Hole Tube
Pre-order
234,000
Factory Lead Time:22-26 weeks
2,340+$1.1
4,680+$1.0375
- +
Ext. Price(USD):$2,574.00
MOQ:2,340
Mult:2,340
SPQ:2,340
25 / PageGoto