Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
2,500,000
Factory Lead Time:9 weeks
5,000+$0.3586
- +
Ext. Price(USD):$1,793.00
MOQ:5,000
Mult:5,000
SPQ:5,000
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$1.3614
- +
Ext. Price(USD):$3,920.83
MOQ:2,880
Mult:2,880
SPQ:960
Header, Vertical, 2.54mm, 34POS, 2Row, Short Ejector, TH, 1Key
Available Stock
2,728
Estimated Ship Time:6-12 working days
10+$0.4959
50+$0.4959
100+$0.4761
200+$0.4761
- +
Ext. Price(USD):$24.29
MOQ:49
Mult:1
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.5135
- +
Ext. Price(USD):$693.22
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Wire-to-Wire F 7 POS 1.5mm IDT ST Cable Mount Box
Available Stock
5,840
Estimated Ship Time:4-6 working days
1+$0.1812
100+$0.1574
- +
Ext. Price(USD):$0.18
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR 22 POS 3mm Solder ST Top Entry TH Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.4878
- +
Ext. Price(USD):$3,358.53
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.7664
- +
Ext. Price(USD):$3,734.64
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.8269
- +
Ext. Price(USD):$744.21
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.7496
- +
Ext. Price(USD):$3,149.28
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8688
- +
Ext. Price(USD):$1,172.88
MOQ:1,350
Mult:450
SPQ:450
JST
ECAD Model:
Board-to-Board Connector, 3A AC/DC
Available Stock
1,635
Estimated Ship Time:6-7 working days
22+
20+$1.1066
150+$0.3882
- +
Ext. Price(USD):$22.13
MOQ:20
Mult:20
1.0mm Pitch Disconnectable Insulation Displacement Connector
Available Stock
230
Estimated Ship Time:14-17 working days
50+$0.848
100+$0.7328
2,000+$0.6317
4,000+$0.6305
- +
Ext. Price(USD):$50.03
MOQ:59
Mult:1
SPQ:1
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Right Angle Header, TH
Pre-order
1,600,000
Factory Lead Time:15 weeks
3,200+$0.477
- +
Ext. Price(USD):$1,526.40
MOQ:3,200
Mult:3,200
SPQ:1,600
Pre-order
156,000
Factory Lead Time:22-26 weeks
1,560+$3.3
5,005+$3.075
10,010+$2.9
- +
Ext. Price(USD):$5,148.00
MOQ:1,560
Mult:1,560
SPQ:1,560
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$1.673
- +
Ext. Price(USD):$2,559.69
MOQ:1,530
Mult:1,530
SPQ:510
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$7.0299
- +
Ext. Price(USD):$6,326.91
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 20 Pos 3mm Solder Straight Top Entry TH Tray
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$2.2876
- +
Ext. Price(USD):$3,397.08
MOQ:1,485
Mult:1,485
SPQ:495
Molex
ECAD Model:
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1.85
4,000+$1.625
10,000+$1.5875
- +
Ext. Price(USD):$2,775.00
MOQ:1,500
Mult:1,500
JST
ECAD Model:
Conn Unshrouded Header HDR 22 POS 2.5mm Solder ST Thru-Hole Reel
Pre-order
45,000
Factory Lead Time:18-22 weeks
26+
4,500+$0.3975
13,500+$0.3909
22,500+$0.3809
- +
Ext. Price(USD):$1,788.75
MOQ:4,500
Mult:4,500
SPQ:4,500
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.6142
- +
Ext. Price(USD):$4,879.17
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.6278
- +
Ext. Price(USD):$2,197.53
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector Assembly, Solder
Pre-order
337,500
Factory Lead Time:15 weeks
675+$0.6128
- +
Ext. Price(USD):$827.28
MOQ:1,350
Mult:675
SPQ:675
Harwin
ECAD Model:
Conn Datamate M 30 POS Crimp ST
Available Stock
50
Estimated Ship Time:7-12 working days
1+$56.5435
10+$53.7756
25+$50.9089
50+$48.141
- +
Ext. Price(USD):$282.71
MOQ:5
Mult:1
SPQ:1
Pre-order
76,000
Factory Lead Time:22-26 weeks
760+$3.8125
1,140+$3.6125
5,320+$3.375
10,260+$3.175
- +
Ext. Price(USD):$2,897.50
MOQ:760
Mult:760
SPQ:760
Molex
ECAD Model:
TEN60 R/A RECEPT ASSY TOP GUIDE
Pre-order
50,400
Factory Lead Time:22-26 weeks
504+$33.7625
1,200+$29.55
3,000+$28.925
- +
Ext. Price(USD):$17,016.30
MOQ:504
Mult:504
25 / PageGoto