Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
1,417,500
Factory Lead Time:15 weeks
2,835+$3.0449
- +
Ext. Price(USD):$8,632.29
MOQ:2,835
Mult:2,835
SPQ:945
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 12 POS 1.5mm Solder ST Top Entry SMD Pico-SPOX™ T/R
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.625
4,000+$0.6
5,000+$0.5625
- +
Ext. Price(USD):$1,250.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.1754
- +
Ext. Price(USD):$7,357.86
MOQ:900
Mult:900
SPQ:300
Pre-order
200,000
Factory Lead Time:8 weeks
400+$0.8531
- +
Ext. Price(USD):$682.48
MOQ:800
Mult:400
SPQ:400
Molex
ECAD Model:
Socket Strip Receptacle 6 Pos 2mm Solder ST SMD Milli-Grid™ Tube
Pre-order
435,000
Factory Lead Time:22-26 weeks
4,350+$0.575
8,700+$0.5375
- +
Ext. Price(USD):$2,501.25
MOQ:4,350
Mult:4,350
SPQ:4,350
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7399
- +
Ext. Price(USD):$1,331.82
MOQ:1,800
Mult:1,800
SPQ:600
multicomp
ECAD Model:
TERMINAL BLOCK, HEADER, 5POS, TH; Gender:Header; Pitch Spacing:3.81mm; No. of Positions:5Ways; Rated Current:12A; Rated Voltage:300V; Block Orientation:Through Hole Vertical; Product Range:-; SVHC:No SVHC (15-Jan-2019);
Available Stock
166
Estimated Ship Time:6-12 working days
25+$0.7396
100+$0.71
1,500+$0.639
2,500+$0.639
- +
Ext. Price(USD):$24.40
MOQ:33
Mult:1
JST
ECAD Model:
Shrouded Header HDR 5 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
9,000
Estimated Ship Time:4-6 working days
1,000+$0.0307
- +
Ext. Price(USD):$30.70
MOQ:1,000
Mult:1,000
SPQ:1,000
Connector, One Piece Interface M, 5 POS, 2.54mm, Solder RA Side Entry, SMD, T/R
Available Stock
84
Estimated Ship Time:8-16 working days
10+$6.1104
49+$5.6202
1,000+$3.6963
1,295+$3.5631
- +
Ext. Price(USD):$177.20
MOQ:29
Mult:1
SPQ:1
Headers&Wire Housings 14 POS RECPT 30AU
Available Stock
2,139
Estimated Ship Time:7-9 working days
22+
70+$1.595
250+$1.573
350+$1.54
700+$1.507
1,400+$1.485
- +
Ext. Price(USD):$111.65
MOQ:70
Mult:1
SPQ:1
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0968
- +
Ext. Price(USD):$1,316.16
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 11 POS 2mm Solder ST Top Entry SMD T/R
Available Stock
1,000
Estimated Ship Time:4-6 working days
500+$0.7642
- +
Ext. Price(USD):$382.10
MOQ:500
Mult:500
SPQ:500
Lumberg
ECAD Model:
IDC Connector SKT 14 POS 1.27mm IDT RA Cable Mount Box
Available Stock
771
Estimated Ship Time:6-12 working days
10+$0.8788
100+$0.8056
500+$0.8056
- +
Ext. Price(USD):$24.60
MOQ:28
Mult:1
Connector Header, Unshrouded, 4 Pos, 2.5mm Pitch, RA, Thru-Hole
Available Stock
427
Estimated Ship Time:14-17 working days
100+$0.1247
500+$0.1165
1,000+$0.1041
2,000+$0.1016
4,000+$0.1016
- +
Ext. Price(USD):$50.00
MOQ:401
Mult:1
SPQ:1
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8757
- +
Ext. Price(USD):$1,313.55
MOQ:1,500
Mult:1,500
SPQ:500
Conn Shrouded Header (3 Sides), HDR 2 POS, 2mm, Solder, ST, Thru-Hole, Bag
Pre-order
4,000,000
Factory Lead Time:22-26 weeks
40,000+$0.0209
50,000+$0.0179
1,000,000+$0.0141
2,000,000+$0.013
- +
Ext. Price(USD):$836.00
MOQ:40,000
Mult:40,000
JST
ECAD Model:
Conn Board to Board RCP 10 POS 2.5mm Solder RA Thru-Hole Box
Available Stock
2,798
Estimated Ship Time:6-7 working days
23+
20+$0.8222
200+$0.3326
- +
Ext. Price(USD):$16.44
MOQ:20
Mult:20
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.9147
- +
Ext. Price(USD):$5,897.64
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
IDC Connector RCP 3 Pos 2mm IDT RA Cable Mount Box
Available Stock
24,000
Estimated Ship Time:6-7 working days
25+
2,000+$0.0596
- +
Ext. Price(USD):$119.20
MOQ:2,000
Mult:2,000
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$7.6027
- +
Ext. Price(USD):$6,842.43
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 2.00μm Tin Plating with Peg 3.60mm Tail Length Pick & Place Cap 46 Circuits Glow Wire Tube
Pre-order
539,000
Factory Lead Time:22-26 weeks
5,390+$1.775
- +
Ext. Price(USD):$9,567.25
MOQ:5,390
Mult:5,390
SPQ:5,390
Conn HDR, 14P MTA156 CONN ASSY 22AWG LF
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$1.475
500+$1.375
1,000+$1.225
25,000+$1.0875
50,000+$0.95
- +
Ext. Price(USD):$184.37
MOQ:125
Mult:125
SPQ:125
Molex
ECAD Model:
Conn Socket Strip RCP 12 POS 2.54mm Solder RA Thru-Hole Tray
Pre-order
33,800
Factory Lead Time:22-26 weeks
338+$0.7875
1,350+$0.725
- +
Ext. Price(USD):$266.17
MOQ:338
Mult:338
SPQ:338
Conn Unshrouded Header HDR 24 POS 2.54mm Solder ST Thru-Hole Automotive Carton
Pre-order
240,000
Factory Lead Time:22-26 weeks
2,400+$4.1125
5,000+$3.0375
10,000+$2.35
50,000+$1.95
100,000+$1.7
- +
Ext. Price(USD):$9,870.00
MOQ:2,400
Mult:2,400
SPQ:2,400
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1456
- +
Ext. Price(USD):$1,374.72
MOQ:1,200
Mult:1,200
SPQ:400
25 / PageGoto