Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
1,147,500
Factory Lead Time:15 weeks
2,295+$2.6096
- +
Ext. Price(USD):$5,989.03
MOQ:2,295
Mult:2,295
SPQ:765
Conn Shrouded Header HDR 7 POS 1.5mm Solder ST Thru-Hole Box
Pre-order
89,600
Factory Lead Time:16-18 weeks
8,960+$0.0339
- +
Ext. Price(USD):$303.74
MOQ:8,960
Mult:8,960
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.175
12,000+$0.1563
25,040+$0.1288
50,000+$0.125
100,000+$0.1213
- +
Ext. Price(USD):$1,050.00
MOQ:6,000
Mult:6,000
SPQ:6,000
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.4815
- +
Ext. Price(USD):$2,222.25
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$2.8308
- +
Ext. Price(USD):$5,350.21
MOQ:1,890
Mult:1,890
SPQ:945
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 34 POS 2mm Solder ST Top Entry Thru-Hole Milli-Grid Tube
Pre-order
1,400,000
Factory Lead Time:22-26 weeks
14,000+$1.575
30,800+$1.3875
75,600+$1.35
- +
Ext. Price(USD):$22,050.00
MOQ:14,000
Mult:14,000
Conn Shrouded Header (4 Sides) M 2 POS 3.5mm Solder RA Side Entry Thru-Hole
Available Stock
814
Estimated Ship Time:6-12 working days
100+$0.2016
500+$0.1882
1,000+$0.1882
- +
Ext. Price(USD):$24.19
MOQ:120
Mult:10
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$3.8388
- +
Ext. Price(USD):$6,218.85
MOQ:1,620
Mult:1,620
SPQ:540
Molex
Package:SMD,P=1.5mm,Horizontal SMD
ECAD Model:
1.50mm Pitch Click Mate Wire-to-Board PCB Receptacle, Dual Row, SMD, Right Angle, 0.76μm Gold Au Plating, 18 Circuits, Natural
Pre-order
165,000
Factory Lead Time:22-26 weeks
1,650+$5.325
4,400+$4.6625
10,450+$4.575
- +
Ext. Price(USD):$8,786.25
MOQ:1,650
Mult:1,650
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$2.8499
- +
Ext. Price(USD):$2,564.91
MOQ:900
Mult:900
SPQ:450
Molex
ECAD Model:
Pre-order
192,000
Factory Lead Time:22-26 weeks
1,920+$2.95
4,000+$2.5875
10,000+$2.525
- +
Ext. Price(USD):$5,664.00
MOQ:1,920
Mult:1,920
JST
ECAD Model:
Shrouded Header (4 Sides) HDR 11 POS 2mm Solder RA Side Entry SMD T/R
Available Stock
2,000
Estimated Ship Time:4-6 working days
1,000+$0.403
- +
Ext. Price(USD):$403.00
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0272
- +
Ext. Price(USD):$1,232.64
MOQ:1,200
Mult:1,200
SPQ:400
80AK4153;
Available Stock
282
Estimated Ship Time:6-12 working days
1+$13.0125
5+$12.492
100+$11.2428
250+$11.2428
- +
Ext. Price(USD):$26.02
MOQ:2
Mult:1
JST
ECAD Model:
Wire-to-Wire Connector HDR 23 Pos 1mm IDT ST Cable Mount Box
Available Stock
1,600
Estimated Ship Time:4-6 working days
100+$1.1531
- +
Ext. Price(USD):$115.31
MOQ:100
Mult:100
SPQ:100
Molex
ECAD Model:
Pre-order
588,000
Factory Lead Time:22-26 weeks
5,880+$4.7
- +
Ext. Price(USD):$27,636.00
MOQ:5,880
Mult:5,880
SPQ:5,880
JST
ECAD Model:
IDC Connector RCP 5 POS 3.96mm
Pre-order
50,000
Factory Lead Time:18-22 weeks
26+
5,000+$0.3711
15,000+$0.3649
25,000+$0.3556
- +
Ext. Price(USD):$1,855.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7782
- +
Ext. Price(USD):$1,400.76
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.86
- +
Ext. Price(USD):$1,161.00
MOQ:1,350
Mult:1,350
SPQ:450
High Power DIP Header Connector
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$2.4791
- +
Ext. Price(USD):$12,643.41
MOQ:5,100
Mult:5,100
SPQ:1,700
Molex
ECAD Model:
Nano-Fit Vertical Header, TH, 2.5mm Pitch, Dual Row, 4 Circuits
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1.4
4,000+$1.2375
10,000+$1.2
- +
Ext. Price(USD):$2,100.00
MOQ:1,500
Mult:1,500
Conn Shrouded Header HDR 24 POS 1.5mm Solder ST Thru-Hole Box
Available Stock
2,775
Estimated Ship Time:6-7 working days
21+
20+$0.6602
315+$0.2744
- +
Ext. Price(USD):$13.20
MOQ:20
Mult:20
Conn Shrouded Header HDR 40 POS 1.27mm Solder ST Top Entry SMD Reel
Available Stock
280
Estimated Ship Time:7-12 working days
50+$2.9656
- +
Ext. Price(USD):$240.21
MOQ:81
Mult:1
SPQ:1
JST
ECAD Model:
Board to Board Connector RCP 9 POS 2mm Solder ST Thru-Hole Box
Available Stock
367
Estimated Ship Time:14-17 working days
100+$0.3288
500+$0.2946
1,000+$0.2858
2,000+$0.2597
4,000+$0.2586
- +
Ext. Price(USD):$50.30
MOQ:153
Mult:1
SPQ:1
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.2925
- +
Ext. Price(USD):$731.25
MOQ:2,500
Mult:500
SPQ:500
25 / PageGoto