Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 12-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7921
- +
Ext. Price(USD):$1,069.33
MOQ:1,350
Mult:1,350
SPQ:450
Conn Shrouded Header (4 Sides) HDR 6 POS 2mm Solder RA Side Entry SMD T/R
Available Stock
998
Estimated Ship Time:6-7 working days
20+$0.6917
- +
Ext. Price(USD):$13.83
MOQ:20
Mult:20
2.5mm Pitch Disconnectable Crimp Style Connector
Available Stock
500
Estimated Ship Time:14-17 working days
50+$0.585
100+$0.5001
4,000+$0.3435
5,000+$0.3435
- +
Ext. Price(USD):$50.31
MOQ:86
Mult:1
SPQ:1
CamdenBoss
ECAD Model:
HEADER, SIDE-ENTRY, 8WAY, 5.08MM; Pitch Spacing:5.08mm; No. of Positions:8Ways; Wire Size (AWG):-; Conductor Area CSA:-; Wire Connection Method:-; Rated Current:12A; Rated Voltage:320V; Product Range:CTB9358/A Series; SV
Available Stock
33
Estimated Ship Time:6-12 working days
10+$1.7472
100+$1.716
250+$1.716
500+$1.6848
1,000+$1.6848
- +
Ext. Price(USD):$24.46
MOQ:14
Mult:1
Conn Unshrouded Header HDR 15 POS 3.96mm Solder ST Thru-Hole Box
Pre-order
10,000
Factory Lead Time:22-26 weeks
100+$11.975
1,000+$8.6125
10,000+$6.925
- +
Ext. Price(USD):$1,197.50
MOQ:100
Mult:100
SPQ:100
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.5337
- +
Ext. Price(USD):$2,760.66
MOQ:1,800
Mult:1,800
SPQ:600
PIN HEADER, 2 POSITION, 5MM; Gender:Header; Pitch Spacing:5mm; No. of Positions:2Positions; Rated Current:16A; Rated Voltage:300V; Block Orientation:Through Hole Vertical; Product Range:ME Series; Colou
Available Stock
202
Estimated Ship Time:6-12 working days
1+$0.4249
250+$0.3965
500+$0.3895
1,000+$0.3824
5,000+$0.3824
- +
Ext. Price(USD):$24.21
MOQ:57
Mult:1
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.171
- +
Ext. Price(USD):$2,930.85
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.5407
- +
Ext. Price(USD):$2,079.94
MOQ:1,350
Mult:1,350
SPQ:450
3.96mm Pitch Disconnectable Crimp Style Connectors Headers
Available Stock
3,410
Estimated Ship Time:6-7 working days
22+
20+$0.2493
200+$0.1003
- +
Ext. Price(USD):$4.98
MOQ:20
Mult:20
Conn Wire to Wire RCP 4Power/13Signal POS 7.5mm/1.5mm ST Panel Mount Box
Pre-order
6,480
Factory Lead Time:16-18 weeks
648+$3.3705
- +
Ext. Price(USD):$2,184.08
MOQ:648
Mult:648
Conn Mictor SB Connector PL 80 POS 0.8mm Solder ST SMD Box/Tray
Pre-order
32,000
Factory Lead Time:22-26 weeks
320+$11.4375
1,000+$10.8375
50,000+$8.425
100,000+$8.0625
- +
Ext. Price(USD):$3,660.00
MOQ:320
Mult:320
Molex
ECAD Model:
Shrouded Header (4 Sides) M 4 POS 2mm Solder ST Thru-Hole Tube
Pre-order
560,000
Factory Lead Time:22-26 weeks
5,600+$0.8625
- +
Ext. Price(USD):$4,830.00
MOQ:5,600
Mult:5,600
SPQ:5,600
Wire-to-Board Header, 18 Pos, 4.2mm Pitch, Solder RA Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$6.4884
- +
Ext. Price(USD):$8,759.34
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$1.125
4,000+$1
10,000+$0.9625
- +
Ext. Price(USD):$2,025.00
MOQ:1,800
Mult:1,800
Amphenol
ECAD Model:
Available Stock
1,800
Estimated Ship Time:3-5 working days
1+$2.706
200+$2.5012
1,400+$2.3923
- +
Ext. Price(USD):$2.70
MOQ:1
Mult:1
SPQ:200
Molex
ECAD Model:
Nano-Fit Vertical Header, Through Hole, 2.50mm Pitch, Single Row
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$0.8
4,000+$0.7
10,000+$0.6875
- +
Ext. Price(USD):$1,440.00
MOQ:1,800
Mult:1,800
Wire to Board HDR 6 POS 3mm Solder ST Top Entry Thru-Hole Tray
Pre-order
2,092,500
Factory Lead Time:15 weeks
4,185+$0.6512
- +
Ext. Price(USD):$2,725.27
MOQ:4,185
Mult:4,185
SPQ:1,395
Wire-to-Board HDR, 2 POS, 3mm, Solder ST Top Entry TH Tray
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.6319
- +
Ext. Price(USD):$5,118.39
MOQ:8,100
Mult:8,100
SPQ:2,700
Molex
ECAD Model:
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.25
12,000+$0.2388
- +
Ext. Price(USD):$1,500.00
MOQ:6,000
Mult:6,000
SPQ:6,000
Terminal Female, 0.64mm
Available Stock
6,950
Estimated Ship Time:3-5 working days
23+
100+$0.0459
200+$0.0443
300+$0.0432
- +
Ext. Price(USD):$4.59
MOQ:100
Mult:1
SPQ:200
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$7.5765
- +
Ext. Price(USD):$10,228.27
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
322,000
Factory Lead Time:22-26 weeks
3,220+$1.75
8,050+$1.5375
20,010+$1.5
- +
Ext. Price(USD):$5,635.00
MOQ:3,220
Mult:3,220
Pre-order
1,600,000
Factory Lead Time:9 weeks
3,200+$1.6557
- +
Ext. Price(USD):$5,298.24
MOQ:3,200
Mult:200
SPQ:200
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Vertical SMT Tails Hold Down Tin Plated Natural Color 2 Pos Non-Glow Wire Compatible
Pre-order
4,500,000
Factory Lead Time:13 weeks
9,000+$0.6964
- +
Ext. Price(USD):$6,267.60
MOQ:9,000
Mult:9,000
SPQ:1,800
25 / PageGoto