Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 7 POS 2mm Solder RA Side Entry Thru-Hole Box
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.0832
27,000+$0.0818
45,000+$0.0797
- +
Ext. Price(USD):$748.80
MOQ:9,000
Mult:9,000
SPQ:9,000
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.8001
- +
Ext. Price(USD):$2,430.13
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector, 4.2mm, Right Angle Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.6557
- +
Ext. Price(USD):$8,444.07
MOQ:5,100
Mult:5,100
SPQ:1,700
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.3412
- +
Ext. Price(USD):$1,023.60
MOQ:3,000
Mult:1,500
SPQ:500
Molex
ECAD Model:
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$1.375
- +
Ext. Price(USD):$8,250.00
MOQ:6,000
Mult:6,000
SPQ:6,000
Disconnectable Insulation Displacement Connectors, 1.27mm Pitch, Ribbon Cables
Pre-order
9,000
Factory Lead Time:16-18 weeks
900+$1.4717
- +
Ext. Price(USD):$1,324.53
MOQ:900
Mult:900
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 2.00um Tin Sn Plating without Peg 3.60mm PC Tail Length Pick and Place Cap 48 Circuits Glow Wire Capable Tube
Pre-order
560,000
Factory Lead Time:22-26 weeks
5,600+$1.825
- +
Ext. Price(USD):$10,220.00
MOQ:5,600
Mult:5,600
SPQ:5,600
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6487
- +
Ext. Price(USD):$1,483.83
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.2413
- +
Ext. Price(USD):$1,489.56
MOQ:1,200
Mult:1,200
SPQ:400
Conn Shrouded Header HDR 32 POS 1.5mm Solder ST Thru-Hole Box
Available Stock
735
Estimated Ship Time:6-7 working days
21+
245+$0.395
- +
Ext. Price(USD):$96.77
MOQ:245
Mult:245
Molex
ECAD Model:
Wire-to-Board Connector RCP, 24 POS, 2.54mm, Solder RA Thru-Hole, EXTreme LPHPower™ Tray
Pre-order
182,000
Factory Lead Time:22-26 weeks
1,820+$9.1
4,000+$7.975
10,000+$7.8
- +
Ext. Price(USD):$16,562.00
MOQ:1,820
Mult:1,820
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$0.8321
- +
Ext. Price(USD):$1,572.66
MOQ:1,890
Mult:1,890
SPQ:945
Molex
ECAD Model:
NeoScale High-Speed Mezzanine Plug, 2.80mm Pitch, 4x18, 72 Triads-100 Ohm (216 Circuits), 7.00mm Height
Pre-order
14,000
Factory Lead Time:22-26 weeks
140+$37.2875
200+$33.9625
400+$33.0625
- +
Ext. Price(USD):$5,220.25
MOQ:140
Mult:140
SPQ:140
JST
ECAD Model:
Conn IDC Connector F 34 POS 2.54mm Solder RA Thru-Hole Box
Pre-order
8,000
Factory Lead Time:18-22 weeks
26+
800+$0.875
2,400+$0.8604
4,000+$0.8386
- +
Ext. Price(USD):$700.00
MOQ:800
Mult:800
SPQ:800
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.2691
- +
Ext. Price(USD):$1,522.92
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7556
- +
Ext. Price(USD):$1,360.08
MOQ:1,800
Mult:1,800
SPQ:600
Conn Unshrouded Header HDR 6 POS 2.54mm Solder ST Top Entry Thru-Hole Carton
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.575
50,000+$0.4625
100,000+$0.4125
250,000+$0.375
- +
Ext. Price(USD):$5,750.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.7131
- +
Ext. Price(USD):$2,312.68
MOQ:1,350
Mult:1,350
SPQ:450
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Header, Dual Row, Right Angle, SMT
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$3.1354
- +
Ext. Price(USD):$9,406.20
MOQ:3,000
Mult:3,000
SPQ:600
JST
ECAD Model:
Shrouded Header, Straight, Through Hole
Available Stock
158
Estimated Ship Time:4-6 working days
25+
1+$0.8855
- +
Ext. Price(USD):$0.88
MOQ:1
Mult:1
SPQ:1
JST
ECAD Model:
Male Connector 36 POS
Available Stock
39
Estimated Ship Time:14-17 working days
1+$15.2139
10+$8.2944
2,000+$6.0105
4,000+$5.9992
- +
Ext. Price(USD):$60.85
MOQ:4
Mult:1
SPQ:1
Wire-to-Board Connector HDR 4 Pos 4.2mm Solder Right Angle Side Entry TH Tray
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$1.2865
- +
Ext. Price(USD):$4,631.40
MOQ:3,600
Mult:3,600
SPQ:1,200
Wire-to-Board Header 14 POS 3mm Solder ST Top Entry Thru-Hole Tray
Pre-order
1,080,000
Factory Lead Time:15 weeks
2,160+$1.687
- +
Ext. Price(USD):$3,643.92
MOQ:2,160
Mult:2,160
SPQ:720
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 9 POS 2.5mm Solder ST Top Entry Thru-Hole Automotive
Available Stock
1,350
Estimated Ship Time:4-6 working days
150+$0.2304
- +
Ext. Price(USD):$34.56
MOQ:150
Mult:150
SPQ:150
Conn Shrouded Header (4 Sides) M 3 POS 5.08mm Solder RA Side Entry Thru-Hole
Available Stock
620
Estimated Ship Time:6-12 working days
100+$0.233
500+$0.233
1,000+$0.2288
2,500+$0.2288
5,000+$0.2288
- +
Ext. Price(USD):$25.63
MOQ:110
Mult:10
25 / PageGoto