Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Conn Shrouded Header HDR 2 POS 2mm Solder ST Thru-Hole Automotive Box
Available Stock
5,770
Estimated Ship Time:6-7 working days
21+
20+$0.1041
2,000+$0.0419
- +
Ext. Price(USD):$2.08
MOQ:20
Mult:20
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.9081
- +
Ext. Price(USD):$1,717.29
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
EXTreme EnergetiC Modular Vertical Receptacle Assembly, 2 Power Circuits, with Guide
Pre-order
32,400
Factory Lead Time:22-26 weeks
324+$6.3625
800+$5.5625
2,000+$5.45
- +
Ext. Price(USD):$2,061.45
MOQ:324
Mult:324
JST
ECAD Model:
Conn Board to Board RCP 15 POS 1.25mm Solder ST Thru-Hole Box
Available Stock
1,000
Estimated Ship Time:4-6 working days
26+
1+$1.4008
- +
Ext. Price(USD):$1.40
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.5954
- +
Ext. Price(USD):$803.79
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$7.634
- +
Ext. Price(USD):$6,870.60
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Wire to Board PL 24 POS 2.54mm Solder RA Side Entry Thru-Hole EXTreme PowerPlus Tray
Pre-order
198,000
Factory Lead Time:22-26 weeks
1,980+$3.575
4,000+$3.1375
10,000+$3.075
- +
Ext. Price(USD):$7,078.50
MOQ:1,980
Mult:1,980
Wire-to-Board Connector, 3.0mm, Right Angle SMT Tails and Hold Down Header
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$3.5637
- +
Ext. Price(USD):$10,691.10
MOQ:3,000
Mult:3,000
SPQ:600
3M
ECAD Model:
Conn Wire to Board HDR 4 POS 2.54mm ST Cable Mount
Available Stock
500
Estimated Ship Time:7-12 working days
1+$1.98
- +
Ext. Price(USD):$401.94
MOQ:203
Mult:1
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0184
- +
Ext. Price(USD):$1,222.08
MOQ:1,200
Mult:1,200
SPQ:400
Conn Shrouded Header HDR 17 POS 1.5mm Solder RA Thru-Hole Box
Pre-order
28,000
Factory Lead Time:16-18 weeks
2,800+$0.3597
- +
Ext. Price(USD):$1,007.16
MOQ:2,800
Mult:2,800
Conn Wire to Board HDR 2 POS 3.96mm Solder ST Thru-Hole Box
Available Stock
1,250
Estimated Ship Time:5-9 working days
22+
10+$0.1047
50+$0.0798
150+$0.0785
- +
Ext. Price(USD):$1.04
MOQ:10
Mult:5
SPQ:1,000
JST
ECAD Model:
Conn Shrouded Header HDR 2 POS 1.25mm Solder ST SMD T/R
Pre-order
225,000
Factory Lead Time:18-22 weeks
26+
22,500+$0.1282
67,500+$0.1261
112,500+$0.1229
- +
Ext. Price(USD):$2,884.50
MOQ:22,500
Mult:22,500
SPQ:22,500
Conn Shrouded Header HDR 15 POS 1.5mm Solder RA Thru-Hole
Available Stock
2,705
Estimated Ship Time:6-7 working days
21+
20+$0.6406
320+$0.2557
- +
Ext. Price(USD):$12.81
MOQ:20
Mult:20
Connector Header 40-Pin 2mm
Pre-order
234,000
Factory Lead Time:22-26 weeks
2,340+$3.0375
5,005+$2.8375
10,010+$2.6625
- +
Ext. Price(USD):$7,107.75
MOQ:2,340
Mult:2,340
SPQ:2,340
Pre-order
240,000
Factory Lead Time:22-26 weeks
2,400+$5.3375
5,004+$4.9875
10,008+$4.6875
- +
Ext. Price(USD):$12,810.00
MOQ:2,400
Mult:2,400
SPQ:2,400
Minitek Reg 1.80mm WTB Connector USCAR 2 V2 Compatible Right Angle TH 16-Pin Header C Coding
Pre-order
1,600,000
Factory Lead Time:9 weeks
3,200+$1.6573
- +
Ext. Price(USD):$5,303.36
MOQ:3,200
Mult:800
SPQ:800
Pre-order
15,900
Factory Lead Time:10-16 weeks
24+
1,590+$0.7408
2,120+$0.7214
- +
Ext. Price(USD):$1,177.87
MOQ:1,590
Mult:530
SPQ:530
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.5484
- +
Ext. Price(USD):$987.12
MOQ:1,800
Mult:1,800
SPQ:600
Conn Shrouded Header (4 Sides) M 3 POS 3.5mm Solder ST Top Entry TH
Available Stock
842
Estimated Ship Time:6-12 working days
10+$0.2925
100+$0.2621
2,500+$0.2574
5,000+$0.2574
- +
Ext. Price(USD):$26.32
MOQ:90
Mult:10
Conn Unshrouded Header HDR 50 1.27mm Solder Surface Mount Tape and Reel
Pre-order
600,000
Factory Lead Time:8 weeks
1,200+$1.4885
- +
Ext. Price(USD):$1,786.20
MOQ:1,200
Mult:600
SPQ:600
multicomp
ECAD Model:
Shrouded Header Connector, 4 Pos, 3.81mm Pitch, Solder, ST, Top Entry, Thru-Hole
Available Stock
831
Estimated Ship Time:6-12 working days
5+$0.5905
50+$0.5669
2,500+$0.5102
5,000+$0.5102
- +
Ext. Price(USD):$26.57
MOQ:45
Mult:5
Minitek Wire-to-Board Connector Header, Dual Row, Vertical SMT, 2 Pos, Gold Plated, Black, Glow Wire Compatible
Pre-order
4,500,000
Factory Lead Time:13 weeks
9,000+$0.8965
- +
Ext. Price(USD):$8,068.50
MOQ:9,000
Mult:9,000
SPQ:1,800
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.2542
- +
Ext. Price(USD):$762.60
MOQ:3,000
Mult:1,500
SPQ:500
Conn Shrouded Header M 64 POS 2.54mm Solder RA Side Entry Thru-Hole
Available Stock
252
Estimated Ship Time:6-7 working days
20+$3.0581
- +
Ext. Price(USD):$61.16
MOQ:20
Mult:20
25 / PageGoto