Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.3952
- +
Ext. Price(USD):$948.48
MOQ:2,400
Mult:2,400
SPQ:1,200
Molex
ECAD Model:
Pre-order
220,000
Factory Lead Time:22-26 weeks
2,200+$2.65
- +
Ext. Price(USD):$5,830.00
MOQ:2,200
Mult:2,200
SPQ:2,200
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$3.0375
5,010+$2.8375
10,005+$2.6625
- +
Ext. Price(USD):$5,467.50
MOQ:1,800
Mult:1,800
SPQ:1,800
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.975
- +
Ext. Price(USD):$1,316.25
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Right Angle TH 0.05um Gold Au Plating without Peg 4.60mm PC Tail Length 28 Circuits Glow Wire Capable Tube
Pre-order
489,600
Factory Lead Time:22-26 weeks
4,896+$1.7
- +
Ext. Price(USD):$8,323.20
MOQ:4,896
Mult:4,896
SPQ:4,896
Wire-to-Board HDR 22 Pos 4.2mm Solder ST Top Entry TH
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.6208
- +
Ext. Price(USD):$1,021.10
MOQ:630
Mult:630
SPQ:315
Molex
ECAD Model:
Wire-to-Board Connector Header 14 Pos 1.5mm Solder ST Top Entry SMD Pico-SPOX T/R
Pre-order
400,000
Factory Lead Time:22-26 weeks
4,000+$0.4625
- +
Ext. Price(USD):$1,850.00
MOQ:4,000
Mult:4,000
SPQ:4,000
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3196
- +
Ext. Price(USD):$1,187.64
MOQ:900
Mult:300
SPQ:300
Pre-order
210,000
Factory Lead Time:22-26 weeks
2,100+$2.4375
5,250+$2.275
10,150+$2.1375
- +
Ext. Price(USD):$5,118.75
MOQ:2,100
Mult:2,100
SPQ:2,100
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 14 POS 2.54mm Solder ST SMD T/R
Pre-order
99,000
Factory Lead Time:22-26 weeks
990+$4.25
1,485+$3.55
2,970+$3.0875
5,445+$2.8625
- +
Ext. Price(USD):$4,207.50
MOQ:990
Mult:990
SPQ:990
Molex
ECAD Model:
W-T-B Header, 1.50mm Pitch, Nylon Glass Filled Housing
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.4625
6,000+$0.45
- +
Ext. Price(USD):$1,387.50
MOQ:3,000
Mult:3,000
SPQ:3,000
Wire-to-Board Connector Header 8-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$2.4808
- +
Ext. Price(USD):$4,018.89
MOQ:1,620
Mult:540
SPQ:540
Pre-order
216,000
Factory Lead Time:22-26 weeks
2,160+$8.5125
5,000+$7.8375
10,000+$7.6125
- +
Ext. Price(USD):$18,387.00
MOQ:2,160
Mult:2,160
Molex
ECAD Model:
DBL ROW STR C-GRID WFR 901310040
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$0.575
2,000+$0.5375
- +
Ext. Price(USD):$287.50
MOQ:500
Mult:500
SPQ:500
Molex
ECAD Model:
Wire-to-Board RCP 32 POS 2.54mm Solder RA Thru-Hole EXTreme LPHPower Tray
Pre-order
144,000
Factory Lead Time:22-26 weeks
1,440+$4.4125
- +
Ext. Price(USD):$6,354.00
MOQ:1,440
Mult:1,440
SPQ:1,440
JST
ECAD Model:
Conn IDC HDR 8 POS 2.5mm IDT ST Thru-Hole Box
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.2962
27,000+$0.2912
45,000+$0.2838
- +
Ext. Price(USD):$2,665.80
MOQ:9,000
Mult:9,000
SPQ:9,000
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.2427
- +
Ext. Price(USD):$5,091.24
MOQ:1,200
Mult:1,200
SPQ:400
Shrouded Header (4 Sides) HDR 6 POS 5.08mm Solder ST Thru-Hole
Available Stock
87
Estimated Ship Time:6-12 working days
1+$1.1349
100+$1.0592
250+$1.0403
500+$1.0403
1,000+$1.0403
- +
Ext. Price(USD):$24.96
MOQ:22
Mult:1
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.8481
- +
Ext. Price(USD):$3,844.93
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
IDC Connector F 3 POS 2.5mm IDT RA Cable Mount
Pre-order
2,400,000
Factory Lead Time:22-26 weeks
24,000+$0.0488
80,000+$0.0425
200,000+$0.0413
- +
Ext. Price(USD):$1,171.20
MOQ:24,000
Mult:24,000
Conn Shrouded Header HDR 14 POS 2mm Solder ST Thru-Hole Box
Available Stock
3,115
Estimated Ship Time:5-9 working days
22+
10+$0.4077
50+$0.3139
150+$0.3086
- +
Ext. Price(USD):$4.07
MOQ:10
Mult:5
SPQ:500
Available Stock
9
Estimated Ship Time:7-12 working days
1+$52.0951
10+$41.2214
25+$37.0696
- +
Ext. Price(USD):$260.47
MOQ:5
Mult:1
SPQ:1
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$1.3805
- +
Ext. Price(USD):$3,975.84
MOQ:2,880
Mult:2,880
SPQ:960
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.7496
- +
Ext. Price(USD):$3,149.28
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Conn Shrouded Header HDR 18 POS 1.5mm Solder RA Thru-Hole
Available Stock
2,520
Estimated Ship Time:4-6 working days
280+$0.365
- +
Ext. Price(USD):$102.20
MOQ:280
Mult:280
SPQ:280
25 / PageGoto