Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
IDC Connector PL 10 Pos 2.54mm Solder RA Thru-Hole QF-50 Tray
Available Stock
88
Estimated Ship Time:3-5 working days
06+
10+$0.978
30+$0.9615
50+$0.9277
- +
Ext. Price(USD):$9.78
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
Conn Shrouded Header HDR 8 POS 2mm Solder ST Thru-Hole Box
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.1147
18,000+$0.1127
30,000+$0.1099
- +
Ext. Price(USD):$688.20
MOQ:6,000
Mult:6,000
SPQ:6,000
Molex
ECAD Model:
Wire-to-Board Connector, 20 Pos, 0.5mm Pitch, Solder RA SMD
Available Stock
50
Estimated Ship Time:3-5 working days
04+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Conn Board to Board PL 120 POS 0.4mm Solder ST SMD SlimStack T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.477
- +
Ext. Price(USD):$1,287.90
MOQ:2,700
Mult:1,350
SPQ:450
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.0184
- +
Ext. Price(USD):$1,374.84
MOQ:1,350
Mult:1,350
SPQ:450
Conn Board to Board PIN 20 POS 2.54mm Solder ST Thru-Hole
Pre-order
18,800
Factory Lead Time:22-26 weeks
188+$3.6
375+$3.0375
750+$2.5625
1,000+$2.4
2,500+$2.3
- +
Ext. Price(USD):$676.80
MOQ:188
Mult:188
SPQ:188
Wire-to-Board HDR, 16 Pos, 4.2mm, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.0724
- +
Ext. Price(USD):$1,447.74
MOQ:1,350
Mult:1,350
SPQ:450
Board-to-Board Connector, PL, 80 Pos, 0.8mm Pitch, Solder, Straight, SMD
Pre-order
300,000
Factory Lead Time:6 weeks
600+$2.0334
- +
Ext. Price(USD):$1,220.04
MOQ:600
Mult:600
SPQ:600
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3109
- +
Ext. Price(USD):$1,179.81
MOQ:900
Mult:900
SPQ:300
Board-to-Board Connector HDR 6 Pos 2.2mm Solder Straight Thru-Hole Box
Available Stock
217
Estimated Ship Time:6-7 working days
20+$2.1518
- +
Ext. Price(USD):$43.03
MOQ:20
Mult:20
Conn Ejector Header HDR 6 POS 2.54mm Solder ST Thru-Hole
Available Stock
1,934
Estimated Ship Time:6-12 working days
10+$0.7013
50+$0.7013
500+$0.6171
1,500+$0.6171
- +
Ext. Price(USD):$28.05
MOQ:40
Mult:10
JST
ECAD Model:
Conn Board to Board RCP 50 POS 0.5mm Solder ST Top Entry SMD T/R
Pre-order
60,000
Factory Lead Time:16-18 weeks
6,000+$1.7685
- +
Ext. Price(USD):$10,611.00
MOQ:6,000
Mult:6,000
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
231
Estimated Ship Time:4-6 working days
26+
1+$0.8501
- +
Ext. Price(USD):$0.85
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry TH
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$1.9464
- +
Ext. Price(USD):$4,904.92
MOQ:2,520
Mult:2,520
SPQ:840
Molex
ECAD Model:
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$0.8875
2,000+$0.7625
5,000+$0.75
- +
Ext. Price(USD):$887.50
MOQ:1,000
Mult:1,000
Molex
ECAD Model:
Pre-order
37,500
Factory Lead Time:22-26 weeks
375+$0.4625
1,500+$0.4375
- +
Ext. Price(USD):$173.43
MOQ:375
Mult:375
SPQ:375
JST
ECAD Model:
Shrouded Header (4 Sides), HDR 5 POS 2mm, Solder RA Side Entry, SMD, T/R
Available Stock
4,000
Estimated Ship Time:4-6 working days
1,000+$0.3108
- +
Ext. Price(USD):$310.80
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.7549
- +
Ext. Price(USD):$1,579.41
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Board to Board HDR 50 POS 0.4mm Solder ST SMD SlimStack T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Conn Mezzanine HDR 15 POS 0.5mm Solder ST Top Entry SMD CONAN®
Pre-order
1,200,000
Factory Lead Time:12 weeks
2,400+$1.0689
- +
Ext. Price(USD):$2,565.36
MOQ:2,400
Mult:800
SPQ:800
Minitek Header Wire-to-Board Connector Dual Row Vertical TH Tin Plated 4 Pos Black LCP Non-Glow Compatible With Kink Tails
Pre-order
2,800,000
Factory Lead Time:15 weeks
5,600+$0.5972
- +
Ext. Price(USD):$3,344.32
MOQ:5,600
Mult:2,800
SPQ:2,800
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$4.9738
- +
Ext. Price(USD):$6,043.16
MOQ:1,215
Mult:405
SPQ:405
Wire to Board Connector HDR 8 Pos 3mm Solder Straight Top Entry Thru-Hole
Pre-order
1,687,500
Factory Lead Time:15 weeks
3,375+$0.6929
- +
Ext. Price(USD):$2,338.53
MOQ:3,375
Mult:3,375
SPQ:1,125
Wire-to-Board Connector SKT 80POS 1.27mm IDT SMD
Available Stock
32
Estimated Ship Time:6-12 working days
1+$12.5479
10+$11.7114
250+$11.2931
500+$11.2931
- +
Ext. Price(USD):$25.09
MOQ:2
Mult:1
25 / PageGoto