Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Conn Unshrouded Header HDR 16 POS 2.5mm Solder ST Top Entry Thru-Hole Reel
Pre-order
45,000
Factory Lead Time:18-22 weeks
26+
4,500+$0.2693
13,500+$0.2648
22,500+$0.2581
- +
Ext. Price(USD):$1,211.85
MOQ:4,500
Mult:4,500
SPQ:4,500
JST
ECAD Model:
Conn Socket Strip RCP 10 POS 2.5mm Solder ST Top Entry Thru-Hole
Pre-order
24,000
Factory Lead Time:18-22 weeks
26+
2,400+$0.2877
7,200+$0.2828
12,000+$0.2757
- +
Ext. Price(USD):$690.48
MOQ:2,400
Mult:2,400
SPQ:2,400
Available Stock
19
Estimated Ship Time:7-12 working days
1+$34.104
10+$26.9867
25+$24.2188
- +
Ext. Price(USD):$272.83
MOQ:8
Mult:1
SPQ:1
JST
ECAD Model:
Conn Shrouded Header HDR 9 POS 2mm Solder ST Thru-Hole Box
Available Stock
645
Estimated Ship Time:6-7 working days
26+
20+$0.6558
200+$0.223
- +
Ext. Price(USD):$13.11
MOQ:20
Mult:20
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$3.9327
- +
Ext. Price(USD):$6,370.97
MOQ:1,620
Mult:540
SPQ:540
Conn Shrouded Header HDR 3 POS 2mm Solder ST Thru-Hole Bag
Available Stock
26,250
Estimated Ship Time:6-7 working days
21+
750+$0.0212
- +
Ext. Price(USD):$15.90
MOQ:750
Mult:750
Molex
ECAD Model:
Board-to-Board RCP Connector, 60 Pos, 0.5mm Pitch, Solder, Straight, SMD, T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 9 POS 2mm Solder ST Thru-Hole Tube
Pre-order
18,000
Factory Lead Time:22-26 weeks
180+$3.1125
720+$2.9375
- +
Ext. Price(USD):$560.25
MOQ:180
Mult:180
SPQ:180
Pre-order
360,000
Factory Lead Time:15 weeks
720+$3.5184
- +
Ext. Price(USD):$2,533.24
MOQ:720
Mult:720
SPQ:240
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1605
- +
Ext. Price(USD):$2,916.67
MOQ:1,350
Mult:1,350
SPQ:450
CamdenBoss
ECAD Model:
Shrouded Header (4 Sides) HDR 6 POS 5.08mm Solder ST Thru-Hole
Available Stock
231
Estimated Ship Time:6-12 working days
10+$0.9336
100+$0.8558
500+$0.8558
1,000+$0.8402
2,500+$0.8402
- +
Ext. Price(USD):$24.27
MOQ:26
Mult:1
Molex
ECAD Model:
PCB Header, 2.00mm Pitch, Dual Row, Vertical, TH, 0.38μm Gold Plating, with Peg, 4.60mm Tail, 46 Circuits, Glow Wire Capable, Tube
Pre-order
495,000
Factory Lead Time:22-26 weeks
4,950+$3.6625
- +
Ext. Price(USD):$18,129.37
MOQ:4,950
Mult:4,950
SPQ:4,950
FFC Connector Receptacle, 6POS, 1mm Pitch, Right Angle
Available Stock
20
Estimated Ship Time:6-7 working days
20+$1.2577
- +
Ext. Price(USD):$25.15
MOQ:20
Mult:20
2mm AMP CT Connectors
Pre-order
2,000,000
Factory Lead Time:22-26 weeks
20,000+$0.28
25,000+$0.2313
1,000,000+$0.1538
2,000,000+$0.1463
- +
Ext. Price(USD):$5,600.00
MOQ:20,000
Mult:20,000
Molex
ECAD Model:
18-Pin 0.5mm Vertical Plug Left Latch
Available Stock
25
Estimated Ship Time:3-5 working days
05+
10+$0.6087
50+$0.5983
100+$0.5773
- +
Ext. Price(USD):$6.08
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 28 POS 2mm Solder RA Thru-Hole
Pre-order
100,000
Factory Lead Time:42 weeks
1,000+$0.4566
2,000+$0.449
- +
Ext. Price(USD):$456.60
MOQ:1,000
Mult:1,000
SPQ:1,000
Shrouded Header, HDR, 10 Pos, 2mm, Solder, ST, TH, Box
Available Stock
230
Estimated Ship Time:6-7 working days
20+$0.4435
- +
Ext. Price(USD):$8.87
MOQ:20
Mult:20
Conn Shrouded Header (4 Sides) HDR 3 POS 2.5mm Solder ST Top Entry Thru-Hole Box
Available Stock
988
Estimated Ship Time:6-7 working days
20+$0.0995
- +
Ext. Price(USD):$1.99
MOQ:20
Mult:20
Conn Shrouded Header HDR 12 POS 2mm Solder ST Thru-Hole Box
Available Stock
135
Estimated Ship Time:6-7 working days
20+$0.7035
- +
Ext. Price(USD):$14.07
MOQ:20
Mult:20
Molex
ECAD Model:
Pre-order
120,000
Factory Lead Time:22-26 weeks
1,200+$2.25
2,400+$2.2
2,500+$1.925
5,000+$1.7875
- +
Ext. Price(USD):$2,700.00
MOQ:1,200
Mult:1,200
SPQ:1,200
Molex
ECAD Model:
Unshrouded Header, 8 Pos, 2.54mm, Solder, ST, Top Entry, Thru-Hole, Bulk
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$0.3488
6,000+$0.3288
- +
Ext. Price(USD):$523.20
MOQ:1,500
Mult:1,500
SPQ:1,500
Molex
ECAD Model:
Conn Wire to Board HDR 8 POS 2.5mm Solder RA Thru-Hole Bag
Available Stock
46
Estimated Ship Time:3-5 working days
07+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Connector HDR 20 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$7.1727
- +
Ext. Price(USD):$8,714.83
MOQ:1,215
Mult:1,215
SPQ:405
Molex
ECAD Model:
Conn Board to Board PL 20 POS 0.4mm Solder ST SMD SlimStack T/R
Available Stock
39
Estimated Ship Time:3-5 working days
07+
10+$0.5943
50+$0.5842
100+$0.5637
- +
Ext. Price(USD):$5.94
MOQ:10
Mult:10
SPQ:10
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Vertical SMT Tails Hold Down Tin Plating Natural Color 2 Pos Glow Wire Compatible
Pre-order
4,500,000
Factory Lead Time:13 weeks
9,000+$0.6964
- +
Ext. Price(USD):$6,267.60
MOQ:9,000
Mult:9,000
SPQ:1,800
25 / PageGoto